Hello I recently installed 3/8 glass bypass frameless doors and have no sweep or didn’t install bottom track so some water leaks out in this video it looks like you have no bottom track and have sweeps on your door I was wondering what kind of sweeps are you using and what kind of guide that allow door with sweeps to pass thru.
My contractor installed on the bathtub , one stationary door and the other sliding door, completely wrong for a bathtub, because in order to open the faucet you have to get into the bathtub. The door looks the same as your video door, It's any way that door can be transformed into two sliding doors?
Depends on the layout of your bathroom. If your toilet is on the SAME SIDE of your shower controls, The shower orientation is not necessarily wrong. Your shower doors cannot be retrofitted. The glass is made in precise ways that trying other hardware is nearly impossible. Send us a photo so we can verify. Thank you for watching!!
The top and the bottom of my shower is level but the left and right wall are about half inch deferent..will it be a problem? I’ve already put my tiles :(
Exceptionalglassllc.com
Damn that’s cool. I grew up in north plainfield
How do you remove the sweep to clean them or even replace them?
We had ours installed. But the glasses does not stay in place when we close the door it slides to one side. How do I tighten?
There are adjustments in the top rollers.
Find the mechanism (hole), put something that fits and turn it.
Question. Does a 56-59 inch bypass shower door will fit on a 60 inch shower base?!
Most likely not. The header and threshold may not be wide enough to grasp the brackets.
Hello I recently installed 3/8 glass bypass frameless doors and have no sweep or didn’t install bottom track so some water leaks out in this video it looks like you have no bottom track and have sweeps on your door I was wondering what kind of sweeps are you using and what kind of guide that allow door with sweeps to pass thru.
For this enclosure, the sweeps are attached to this doors themselves.
My contractor installed on the bathtub , one stationary door and the other sliding door, completely wrong for a bathtub, because in order to open the faucet you have to get into the bathtub. The door looks the same as your video door, It's any way that door can be transformed into two sliding doors?
Depends on the layout of your bathroom. If your toilet is on the SAME SIDE of your shower controls, The shower orientation is not necessarily wrong.
Your shower doors cannot be retrofitted. The glass is made in precise ways that trying other hardware is nearly impossible. Send us a photo so we can verify.
Thank you for watching!!
Do you guys service the Texas Market?
I'm afraid we haven't branched out of New Jersey just yet!
The top and the bottom of my shower is level but the left and right wall are about half inch deferent..will it be a problem? I’ve already put my tiles :(
Thank you for the video. How do you clean/maintain the rollers?
My pleasure! They're sealed bearings. Should last a lifetime. wiping down the black grommet ever so often wouldn't hurt.
What are the dimensions of this shower.
And dimensions of shower bench?
69" x 80"
what kind of sweep are you using on the bottom of the doors to keep the water in??
Here you go! www.crlaurence.com/crlapps/showline/largerimage.aspx?productid=195654
This is THE MOST IMPORTANT QUESTION.
I was wondering what company hardware you guys use?
We use our In House Hardware from the SAME manufacturer as CRL. Same product without the name on the hardware.
@@ExceptionalGlassLLC any chance you can send me the contact info to that manufacturer?
@@yossiglanz6790 crlaurence.com
THANK YOU FOR THE UPLOAD
My pleasure!
Thank you for watching!
How much do these cost?
This was a custom project so pricing varies between sizes and choices.
nice!
what you gonna do with that gap in the middle when you close the door
What do you mean? The overlap is correct regarding where the showerhead is.
What's the point if the handles on the outside and inside operate different doors?
It's a poorly bad design, I had to create my own solution to make it work properly ...thier design majorly flawed
Not sure what you mean.. There are towel bars for the outside and inside. Benefit for both.. Explain.
What was your solution? We're always willing to learn
Thanks for video,beautiful doors!! I live in Houston,Tx. Where can I get one of these doors??
Thanks! I'm afraid we're a bit far from Texas.. but we have plans to expand. Thank you for watching!
@@ExceptionalGlassLLC Is there an option to install glass shower door that is an inch thicker? Thanks.
@alpha graficks expecting small arm fire while showering are we??
@@alphagraficks1772 bulletproof Glass is 1"+
I'm sure something can be retrofitted.
How thick is the glass? Thanks
3/8"
Do you do these for tubs as well
Of course!
Is this a diy solution or does it require your company to install
The
If you had a question, Please advise. Thanks for watching and commenting