Everything about this camera is frankly amazing. On top of the color night performance which is something ive been dreaming about, it has a built in mic! I've been wondering for years why Hikvision has failed to put built in mics on their cameras. Well, they're finally here!
i have several of these cameras and i am very impressed with them, i dont need the light on as they work perfect without them on, what i want to know is there any way that the light can be activated via intrusion detection or something similar to use as a deterrant." light only come on when intrusion detection is activated."
Dave, can you take a more in depth look at the Gen2 access control systems you showed us a few weeks back? Integration with existing cams/nvrs, alarms etc and what can be done as part of a wider deployment would be very useful. Very few videos out there on this atm.
Good morning, I love these videos, very informative and have made my mind up as these cameras look awesome for a home setup. One question I have though, do you have to run a separate wire for the audio or is that taken back via the POE and straight into the dvr? I'm hoping the latter as it would make things so easy with camera connections and wiring. Thanks
Hi and thanks for the kind comments, with the Audio its integrated into the product and will be on the same data connection, you just need to enabled audio function on the NVR and change stream type to video and audio on both main stream and sub stream on the NVR video and audio settings 😊
Great video. Is there a way to get this camera to fire the white light only for a set time? For example, line crossing event the camera shines the white light for say 30-60Sec and then turns off again?
DVSLTD apparently this is possible on this Australia page. Firmware available half way down the page. www.securityperth.com.au/security-cameras-perth/hikvision/colorvu-fixed-turret-network-camera personally I don’t use the light on mine as it is good without for me. Maybe a test case for you?
DVSLTD wow I’m sure that company has replies to a video and someone says it works but it’s a lower version. Thanks. I dont use the light anyway as not needed but I see people asking all the time about it.
Hi, you mentioned in the comments you have another model that flashes the led light when you set off the motion, but you gave the same model number as the one in video. Can you give the model number of the model that flashes when motion is set off please? Thank you
Hi mate, love the videos! Would you be able to do a review on the 5mp colourvu, I've noticed you mainly focus on the ip cameras. Unfortunately I've only got shotgun cables run at our home. I've just purchased a hikvision ds7204 huhi dvr. I'm very interested in the 5mp colour vu. I take it the quality is still there on the analogue model too. Also are there any future plans to fetch out the blsck or grey model of these as supposed to the white ones available at the minute.
Hi , thanks for the feedback, I can look at one albeit I have done one in the past , we also now do have black models of the 5MP ColourVu , so HIK are making them 😊
@@m146ocx I’ve got the 5MP DS-2CE72HFT-f28 camera and the 4MP DS-2CD2347G1-LU 2.8mm IP camera and the IDS-7204HUHI DVR. I’m finding the 4MP camera is a better quality picture? What did you get in the end?
If it’s private property or in public, you’re completely fine to record audio without permission, WA atleast, I’m sure it’s fine nation wide though. If my camera picks up your voice while you’re on my property, then you shouldn’t have stepped foot on my property.
Hi I’ve just purchased a HIKvision turret ,I’m using a back box to fit to the wall ,and using the gland on the side of it to pass the Ethernet cable threw , but when tightening down ,the rubber grommet is supposed to seal but mine does not even hold the cable , is there options 🤔🤷♂️
yes some don’t seal when using cat5 cable only , I wrap self-amalgamating tape around the cable and then insert into the gland and tighten down onto that, it will give a really good seal
If I was to use this particular camera without the NVR , but had a memory card in and plugged into my router is line crossing available or is this feature only possible with the nvr. Thanks
Is there a way to set up these cameras to turn on the LED light when motion is detected at a certain location? then turn the LED off after a few minutes of no motion? Would be a great feature to have.
Hi , currently we don’t support motion to turn the light on , its been looked at , the AcuSense range can use motion to turn the white light and sound on if needed 😊
@@DVSLTD that's too bad.. I have little need for a speaker or such. And having the led on all night will likely be too much for every night residential use. Would be a great feature to have as it turning on with motion would scare a potential bad guy, not to mention make them look directly at the camera.
G'day mate, I own a new IDS NVR which runs the DeepinMInd GUI natively. When I log via browser to access settings, I cannot find the settings that will normally enable me to turn the LED light on or off. Can you you please follow this up and let us know for those who own the DeepinMind GUI where this option setting is? Thanks
@@DVSLTD Thanks for responding mate, really appreciate it. My NVR is the Hikvision IDS-9632NXI-I8/16S 32CHANNEL DEEPINMIND SERIES NVR | IDS-9632NXI-I8/16S. I can access the IE GUI of the NVR but the option that you showed on one of your video to turn the LED light ON/OFF is not visible. I also tried using different browsers including older versions of IE...but still the same. I own 16x Colorvu cameras which I have not installed yet simply because I want to disable the LED light and hope to set it up so that it only comes on when an event is triggered. These colorvu cameras are amazing at night.
@@Chavacano Hey , I see , the issue you will have is the colorvu doesn’t support the light linkage , so we cant turn it on when there is motion or VCA actually , its either on auto or timed schedule sorry ☹
do you mean NVR ?, the best method is to log into the IP camera direct and make the changes to the light setup there, if you have a DVR with Turbo Camera , you can open the PTZ control and press menu button to navigate the camera OSD and change the settings there,
Hi Ryan and thanks , currently this ColourVu is full time white light when the light level drops , we do a PIR Bullet and Turret that has the flashing white light when PIR & motion is detected if this helps?
@@DVSLTDoke, but I have try with recorder on my android and when I upload the audio file to the acusense camera, it's sounds like a horror monster 👹 sound. Or a big scratched sound. But IOS recorder I haven't tryed.
Hi David, if you have a NVR that has POE ports then the NVR will power this up the Cat5e / Cat6 cable that you will have or install , so no separate PSU is Required , if you don’t have a NVR with POE ports then it needs to be powered with 12VDC or use a POE switch
So if I need a camera that will positively ID someone they need to be virtually walking underneath it? Doesn’t seem right. Wouldn’t I be better off getting an 8mp model and install a bright and even LED flood light so subjects aren’t either in the dark in the distance or washed out in the foreground? TIA.
@@DVSLTD I think that comment has just made my decision making harder between the ColorVu and the AcuSense. Do I get the ColorVu in the hope that it does arrive or go with the available feature already. Hmmm
Hi , the light on this camera replaces the IR function to give a good colour image at night , it can also be scheduled , we have flashing light and sound models also though
Hi, could you tell me, Do these cameras work on a setup without Internet? And also there's such a vast difference on online pricing for them, ive noted that most of them are a fixed dome type that im seeing, they look slightly smaller than this version but can you still rotate the dome etc? Many thanks
prices online will vary , and yes they can be used without internet but only recording locally with no app function, the domes still have the rotate function , turrerts are the most popular model now
Use Internet explorer , please uninstall the web components from control panel and uninstall programme, then clear the cache on IE, then install web components again when you web browse back into the camera, that should resolve
I’ll give it a try , sounds a bit confusing , I ain’t that clued up with computers , a lot a people seemed to be having the same problem with it , any chance you could upload a video ?
Do you have a video for recommended recording setting for video parameters? FPS, bitrate etc? I have the DS-2CD2347G1-LU 2.8mm and IDS-7204HUHI DVR and want to make sure I’m using the right settings. Thanks
You can login to the nvr and if camera is connected to the nvr poe ports that’s still ok. Download SADP tool and find device on the network , then this will allow you to web login using IE and that IP address . Login to nvr and go to configuration, network ,advanced , others and enable “virtual host” , then go to system , camera management and login to camera using hyperlink
Hello, thanks for the video, just wondering on how do you access the inbuilt microphone on this camera? i've unscrewed the O ring that comes out like you did, just so you can drill it in, but how do you get inside so you can wire it to the cable so you can wire it up to the NVR etc? Also what cables would you need for this?
I've plugged CAT 6 into the camera to the NVR, video works well and a 12 volt DC Power Supply into the camera but no audio is getting picked up, do you have any ideas?, thanks heaps
You don't need to do any wiring, It is an IP camera so the audio can be embedded with the video with just changing some settings, if you have NVR then go to the recording section, or if its standalone access directly the camera video setting and choose audio&video from the dropdown.
Hi can you tell me what exposure setting you’re using in exposure time white balance setting WDR level + image enhancement as I can’t get it as good as you my friend Paul from Wales UK
Hi Paul, the Exposure is set to 1/12 by default and WDR as off, make sure there like this , and hopefully it will improve , good to see another from wales here 😊
Hi, I have the DS-7608NI-K2/8P NVR with firmware version V4.30.005 build 200628 . To that I have a DS-2CD2347G1-LU connected. For the life of me I cannot find the External Devices tab, to turn the white light on/off, anywhere on the NVR directly or anywhere when logged into the NVR via a browser. I have tried Internet explorer, Microsoft Edge and Opera, all to no avail. I have added the Web components but nothing changes. I have tried to access the camera's IP address which is shown in the Configuration/ Camera Management/ Ip Camera, tab but neither browser can access the address. The same for the camera's IP address on the package box. Any ideas, please, for where I am going wrong?
Hi , you can find it in the Camera web , to access this via the NVR Internet explorer, on the NVR go to configuration , network , advanced , others , then enable “ virtual host” and apply, the go back to the camera management tab and each camera will have a hyperlink to access the camera direct from that menu 😊
@@DVSLTD Great, thank you, much appreciated. I would never have worked that out. I guess that I would learn all of this, if I attended an installers course?
Hi All, I have 3 x 4MP colorvu IP cameras but have had issues in totally Dard inviroments when the LED is disabled. this is what I have found:- personally I found it is better to turn off the LED light as the image is still very good without the light even in total darkness, it still looks like daylight however the resolution of the image does drop slightly. With the light off it also stops the LED attracting insects and spiders to gather around the lens and also rain and snow is not illuminated by the LED so the image is not blocked by illuminated rain. THE PROBLEM I HAD IN VERY DARK AREAS One problem I have had with my 3 colorvu cameras 1 x camera is at the front of the house and works great. The 2 at the rear work perfectly in the day but at the dead of night the refresh rate of the image drops down to every 10 seconds. HOW I FIXED THE PROBLEM I have found the best fix to this was running H.265 and dropping the max bitrate to around 500 - 1500kbps dropping the bitrate seams to get the image working again back to a good frame rate. The reason it only effected the 2 x rear cameras was due to the extremely low light levels. However the low bit rate causes problems in the day with sections of the image being grainy and so I have now opted back for the LED function set at max 10% in auto and this keeps the image smooth and clear in totally dark environments. I Hope this helps
Can you tell me if you could mount it flat on an outside wall without any other additions like a junction box or stuff like that? is there enough cabling room in the back to fold up the cable?
Any idea what recorder should be sufficient for 4 of those? Might take 8ch for future upgrade :) I hope they add motion to the bright LED. I'll have it turned of for now anyway...
Just reading the previous comments. It's a shame the light cant come on when motions detected like a normal PIR security light. Do you think colorvu are the future, better than a dark fighter? I'm thinking of buying this exact camera for my property. Thanks
Hi , it’s something we are working towards to get that function , and the colouvu is outstanding technology , I think it’s one of the best out there, the only consideration would be if its Pitch black and you DON’T enable the white light for some reason then the image would be poor , whereas Dark fighter has the ins built IR . 😊
Yes , 99% of our cameras have built In IR for areas with no light or the new white light range that helps to illuminate the area with white light , we also have Darkfighter technology built in to a lot of the models in IP
I currently have these cameras connected to the I series NVR and when viewing configuration online I don't have the external devices tab.. do you know why ? The other one I managed to turn the light off in my situation I find it better with the light off but can't remember how I managed it last time 🙈
Hello mate - I am not able to get any audio in my playback. Why is that? The recording stream is both "video&audio" and I have put the audio sensitivity as 100, but still no audio in the playback. In the live view I can hear the audio, but nothing in the playback. Any suggestions?!
Hi , is the “video&audio” on both main stream and sub-stream ?, and also please go to the storage section where you would set the storage schedule, then under that camera please select the “advanced /more” option and then enable the audio tick box.
@@DVSLTD Hello mate - another question. I changed my camera password for it to be different than the NVR login password. But on doing so, it shows the user has been locked out and the camera is not visible on the NVR monitor anymore. Not sure why this happened. Any clue?
Hi. How do you turn off the light on the outside of the colorvo cameras? Ive been through every setting i can find but cant see anyway of turning it off.
Hi jason , on the IP model , please login to the camera via the web interface and under settings and maintaince or system depending there is a sub menu called external device, you can adjust it there , and under image settings, you can change it to day mode also
@@jasonking1948 Hi jason , is the camera plugged into the POE port of the NVR?, if yes then please login to the NVR and navigate to the network and advanced section under the web , and then more settings and enable virtual host , then under settings tab look for camera management and click on the hyperlink next to the camera you want to access and this should then bring the correct web browser up
@@DVSLTD Hi there Daitech. Is there a way of logging into the IP camera setting remotely ? I'm assuming I need first port forwarding from 65001 to 65016. Is there any other way through IVMS 4200 ? Thank you
When I try to web browse into my DVR live view, it just shows blank squares on the page. It works fine on my phone app, so it can't be the connection. Any ideas? Thanks.
Hi , what web connetion are you using , ? internet explorer 11 should work fine , then install the plugin if asked , then select camera on left to view or press play 😊
@@DVSLTD I've sorted the issue now. I had the 'enable stream encryption' box checked. The problem is the onscreen menu has it shortened to 'enable stream'. It's only until you 'mouse' over it then it displays the full text. This has had me stumped since I set my system up over a month ago. Hope this helps for anyone else. Thank you anyway, I'm sure I'll require your assistance again 👍
@@blakea2219 Hi, to change the light setting please use the camera IP address and internet explorer, once logged into the camera direct you can then go to maitaince tabs and see the External device sub tab 😊
I love colour night vision but really don't like the idea of the light being permanently on attracting attention. Black and white night vision isn't as good but doesn't attract attention.
I cant seem to find the option to turn the light on my Camera please can u help me. i found a video online but the option just isn't there on my nvr. thank you
Hi, I have the colorvu camera with led light.. I get a red Circle in the middle of the Image on all of the cameras when the light is turned on.. what could be causing this?
G'day mate. You reckon you can run through some more high end Hikvision products, like the IDS premium NVR....there are some of us who own these more high end products sadly.....and have no frekin idea how to setup... dumb but true. I speak for all the dumb cunts like myself out there who are too afraid to share the truth...that we are simply dumb... Cheers.
Hello there - is it possible for you to do a review video for this Hikvision camera on similar settings as shown in this video - ruclips.net/video/xerYRR4i7_4/видео.html Will help appreciate if DS-2CD2347G1-L(U) is at par with, or better than NSC-NITECOLOR-DM2 Thanks!
This camera is ridiculous it did not see your face from the other end of the room you’re in darkness when you walk past the camera the light was so bright it whited out your face having these on a domestic property would never be acceptable from a customer’s point of view. You kept on saying it was hurting your eyes how would a customer feel if this was in their porch it would blind them in the face what a ridiculous product
Great job
thanks for watching!
Gracias por su servicio...
@@prabathjayaweera1318 es mi mayor placer
Thanks for taking the time to make this video. The time you put in on all of these is much appreciated!
Game changer !!! love the cams just installed 6 makes the older IR cams look bad lol !!
Thank you for the video. I received my camera today and i couldn't figure out how to turn off the LED lights. Million thanks!
Thanks David appreciate the feedback
Everything about this camera is frankly amazing. On top of the color night performance which is something ive been dreaming about, it has a built in mic! I've been wondering for years why Hikvision has failed to put built in mics on their cameras. Well, they're finally here!
Yes I love this combo also and thanks for giving feedback 😊
Looks a great product - We are having a problem with infrared reflecting on to the lens, this should sort that out hopefully
Excellent I hope you like it 😊
i have several of these cameras and i am very impressed with them, i dont need the light on as they work perfect without them on, what i want to know is there any way that the light can be activated via intrusion detection or something similar to use as a deterrant." light only come on when intrusion detection is activated."
thanks for the update, it’s not something currently we can do but its being looked at 😊
Dave, can you take a more in depth look at the Gen2 access control systems you showed us a few weeks back? Integration with existing cams/nvrs, alarms etc and what can be done as part of a wider deployment would be very useful. Very few videos out there on this atm.
Thanks and yes , in hand
I really loves all your videos, Thanks to you and DVS, great job, keep it up, you are now becoming a star of our CCTV Community.....
Thanks for watching
Hi. Great video. Please can you confirm if you can now get the light to come on with movement?
Hi and thanks , not yet it’s something I am working on
Thanks for your demo
Always a professional vlog🙌
Very informative video. Which NVR is best to use with this camera to use its full potential?
Hi and thanks , it’s supported on K/I series nvr
Wiked looking camera gonna definitely try some of these
Thanks, look forward to seeing your feedback
Howdy….would you recommend Hikvision PTZ’s to monitor perimeter/boundary wall.We have a residential perimeter of around 1.5km.
yes I would do that there very good for perimeter protection 😊
Excellent video, can you set the light to only come on with movement ?
Hi and thanks, currently not but its something we are looking at, the AcuSense model can do that
Good morning, I love these videos, very informative and have made my mind up as these cameras look awesome for a home setup.
One question I have though, do you have to run a separate wire for the audio or is that taken back via the POE and straight into the dvr? I'm hoping the latter as it would make things so easy with camera connections and wiring. Thanks
Hi and thanks for the kind comments, with the Audio its integrated into the product and will be on the same data connection, you just need to enabled audio function on the NVR and change stream type to video and audio on both main stream and sub stream on the NVR video and audio settings 😊
Excellent review! Thank you 👍
Thank you 😊
Hi sir who is best color vu model in 2megapixel
4megapixel
Plz rply both best models im waiting
Great video. Is there a way to get this camera to fire the white light only for a set time? For example, line crossing event the camera shines the white light for say 30-60Sec and then turns off again?
Hi and thank you 😊 , actually not yet but its something we are looking at for sure
DVSLTD apparently this is possible on this Australia page. Firmware available half way down the page. www.securityperth.com.au/security-cameras-perth/hikvision/colorvu-fixed-turret-network-camera personally I don’t use the light on mine as it is good without for me. Maybe a test case for you?
@@epictraveller4862 confirmed it doesn’t exist R&D have said its wrong , and the firmware doesn’t work , they contacted him apparently
DVSLTD wow I’m sure that company has replies to a video and someone says it works but it’s a lower version. Thanks. I dont use the light anyway as not needed but I see people asking all the time about it.
Hi, you mentioned in the comments you have another model that flashes the led light when you set off the motion, but you gave the same model number as the one in video. Can you give the model number of the model that flashes when motion is set off please? Thank you
Hi tim , the colourvu is not currently capable of this but the external AcuSense bullet can do this part number - DS-2CD2T46G1-4I/SL-2.8MM
Does this camera have standard night vision capabilities? Can you turn the LED light on with the phone app?
it doesn’t have IR jus the white light and currently you cant use the app to turn it on and off sorry ☹
Hi mate, love the videos! Would you be able to do a review on the 5mp colourvu, I've noticed you mainly focus on the ip cameras. Unfortunately I've only got shotgun cables run at our home. I've just purchased a hikvision ds7204 huhi dvr. I'm very interested in the 5mp colour vu. I take it the quality is still there on the analogue model too. Also are there any future plans to fetch out the blsck or grey model of these as supposed to the white ones available at the minute.
Hi , thanks for the feedback, I can look at one albeit I have done one in the past , we also now do have black models of the 5MP ColourVu , so HIK are making them 😊
@@DVSLTD brilliant mate, I had a scroll through all your videos on youtube and couldn't see the 5np colourvu only the ip one as above.
@@m146ocx I’ve got the 5MP DS-2CE72HFT-f28 camera and the 4MP DS-2CD2347G1-LU 2.8mm IP camera and the IDS-7204HUHI DVR. I’m finding the 4MP camera is a better quality picture? What did you get in the end?
Hello good day, great video. Just wanna ask some question, does this type of camera have the corridor mode or the hallway mode?
Sorry Dan it’s 3 o’clock in the morning and I’m just browsing I’ve just seen that last question has already been asked and answered my apologies
Due to audio laws, its against law to record person without permission in Australia. The audio is it embedded in video. Or it recorded separate file..
Hi , then you can just disable the audio side it doesn’t have to be enabled actually
If it’s private property or in public, you’re completely fine to record audio without permission, WA atleast, I’m sure it’s fine nation wide though.
If my camera picks up your voice while you’re on my property, then you shouldn’t have stepped foot on my property.
Hi I’ve just purchased a HIKvision turret ,I’m using a back box to fit to the wall ,and using the gland on the side of it to pass the Ethernet cable threw , but when tightening down ,the rubber grommet is supposed to seal but mine does not even hold the cable , is there options 🤔🤷♂️
yes some don’t seal when using cat5 cable only , I wrap self-amalgamating tape around the cable and then insert into the gland and tighten down onto that, it will give a really good seal
If I was to use this particular camera without the NVR , but had a memory card in and plugged into my router is line crossing available or is this feature only possible with the nvr. Thanks
Hi ; yes thats possible to use the line Crossing and SD card together and not just the NVR
Can the white light be set to automatically switch on when this camera picks up moving object or humans?
Hi. If the light is too bright, is there a setting to lower it down.
Yes inside the camera called “smart supplement light” where it adapts to objects closer , or you can turn the brightness down by the slider 😊
@@DVSLTD thanks for that info
Can the LED be triggered of line crossing detection or a alarm input ?
Not currently , it’s on either on or off like IR , we can set a schedule also for it to come on during this , good feedback mind thanks
hello, does hikvision make a wall mount for the colourvu?
Yes there are wall mounts, you can see on the spec sheet on the bottom
Nice arcade machine!
😀👍
Is there a way to set up these cameras to turn on the LED light when motion is detected at a certain location? then turn the LED off after a few minutes of no motion? Would be a great feature to have.
Hi , currently we don’t support motion to turn the light on , its been looked at , the AcuSense range can use motion to turn the white light and sound on if needed 😊
@@DVSLTD that's too bad.. I have little need for a speaker or such. And having the led on all night will likely be too much for every night residential use. Would be a great feature to have as it turning on with motion would scare a potential bad guy, not to mention make them look directly at the camera.
G'day mate, I own a new IDS NVR which runs the DeepinMInd GUI natively. When I log via browser to access settings, I cannot find the settings that will normally enable me to turn the LED light on or off. Can you you please follow this up and let us know for those who own the DeepinMind GUI where this option setting is? Thanks
Hi, do you know the Model of the NVR ? Also assume you can’t access the camera web page remotely to do this ? ,
@@DVSLTD Thanks for responding mate, really appreciate it. My NVR is the Hikvision IDS-9632NXI-I8/16S 32CHANNEL DEEPINMIND SERIES NVR | IDS-9632NXI-I8/16S. I can access the IE GUI of the NVR but the option that you showed on one of your video to turn the LED light ON/OFF is not visible. I also tried using different browsers including older versions of IE...but still the same. I own 16x Colorvu cameras which I have not installed yet simply because I want to disable the LED light and hope to set it up so that it only comes on when an event is triggered. These colorvu cameras are amazing at night.
@@Chavacano Hey , I see , the issue you will have is the colorvu doesn’t support the light linkage , so we cant turn it on when there is motion or VCA actually , its either on auto or timed schedule sorry ☹
@@DVSLTD but the model colorvu i own are the top model in the series......all of them also with mic
Can this model (or Hikvision NVR it's connected to), perform Audio Exception Detection ?
DAITECH can i change the white light on my dvr
do you mean NVR ?, the best method is to log into the IP camera direct and make the changes to the light setup there, if you have a DVR with Turbo Camera , you can open the PTZ control and press menu button to navigate the camera OSD and change the settings there,
@@DVSLTD DAITECH its a bran new 16ch IP NVR
hi there can you set the white light to come on when motion is detected,
keep up the good work.
Hi Ryan and thanks , currently this ColourVu is full time white light when the light level drops , we do a PIR Bullet and Turret that has the flashing white light when PIR & motion is detected if this helps?
thank you for the reply, what the item code for the device you are talking about
@@ryanackerman9866 DS-2CD2347G1-LU
Can you use this camera just through the app and recording onto SD card without the NVR,with just poe ? 😊
Yes you can do that 😊
How you create your own audio file? Do you use some programs?
I just use audio record app on my iphone to be honest , there are a lot of them
@@DVSLTDoke, but I have try with recorder on my android and when I upload the audio file to the acusense camera, it's sounds like a horror monster 👹 sound. Or a big scratched sound. But IOS recorder I haven't tryed.
@@sametmete7680 make sure its sent in this format Upload a .wav mono sound audio file with the size smaller than 512 KB and sampling rate as 8 KHz.
Hi i just bought one of these do i need to buy a power cable its a new nvr i have and i am just setting it up .but no power cable came with it.
Hi David, if you have a NVR that has POE ports then the NVR will power this up the Cat5e / Cat6 cable that you will have or install , so no separate PSU is Required , if you don’t have a NVR with POE ports then it needs to be powered with 12VDC or use a POE switch
@@DVSLTD ye thanks sorted it .can u give me a link to good face and car plates detect camreas for my home
Why don't you deliver to Ireland ?
What ptz controller that will work for hikvision nvr?
What would be newest colorvu model that can Run without nvr?
How are these for longer distance viewings? for example intruders at the bottom of the garden? Would they be in colour or darkened out?
How much bigger are they comparing to the 2CD2332-I
They are slightly larger in comparison overall , but not huge amount
So if I need a camera that will positively ID someone they need to be virtually walking underneath it? Doesn’t seem right. Wouldn’t I be better off getting an 8mp model and install a bright and even LED flood light so subjects aren’t either in the dark in the distance or washed out in the foreground? TIA.
Where is your "over the phone" technical support based, in England?
Cardiff, Wales :)
Hi, Can the ColorVu camera white light be set to flash as a warning like the AcuSense?
Hi , currently not , but we are looking at this
@@DVSLTD I think that comment has just made my decision making harder between the ColorVu and the AcuSense. Do I get the ColorVu in the hope that it does arrive or go with the available feature already. Hmmm
Do Hikvision do a Hikvision 4mp colorvu camera
Hi mate, yes this is the 4MP colorvu camera 😊
DVSLTD where can I get these from
DVSLTD can I buy the hikvision 4mp cameras
The light can't be activated by motion? I suppose no because the camera wouldn't see properly without it on to then detect.
Hi , the light on this camera replaces the IR function to give a good colour image at night , it can also be scheduled , we have flashing light and sound models also though
Hi, could you tell me,
Do these cameras work on a setup without Internet? And also there's such a vast difference on online pricing for them, ive noted that most of them are a fixed dome type that im seeing, they look slightly smaller than this version but can you still rotate the dome etc?
Many thanks
prices online will vary , and yes they can be used without internet but only recording locally with no app function, the domes still have the rotate function , turrerts are the most popular model now
@@DVSLTD thank you so much 👍🏼
External device is not showing up when I log in ?? Any idea on how i can fix it 👍👍
Use Internet explorer , please uninstall the web components from control panel and uninstall programme, then clear the cache on IE, then install web components again when you web browse back into the camera, that should resolve
I’ll give it a try , sounds a bit confusing , I ain’t that clued up with computers , a lot a people seemed to be having the same problem with it , any chance you could upload a video ?
Do you need a laptop for these colour vus? Or can you use the dvr box
Hi, you don’t need a laptop and they will work with NVR or Turbo DVR added as IP , but we suggest a laptop when using IP products
Do you have a video for recommended recording setting for video parameters? FPS, bitrate etc? I have the DS-2CD2347G1-LU 2.8mm and IDS-7204HUHI DVR and want to make sure I’m using the right settings. Thanks
and the camera can't be seen in the dark, right? that's fine if so.
Is that so?
Hi , the camera has a white light on it so can be seen if the white light is set to on 😊
Can we get any IP Colorvu cameras in 2.8mm?
Yes there available in 2.8mm also now
Is it a POE camera?
Is the built in Mic capable of a two way speech ? I.e. Can I have a live conversation with someone like the Ring doorbell ?
The mic is just a mic and not a speaker sorry , we have intercoms and doorbells that have this function as well as some 2 way audio cameras,
How come they don’t do any bigger than 4mp in these?
They are looking at it , the optimum performance is gained currently but the 8MP shouldn’t be to long 😊
SIR ITS IP CAMERA ARE GENERAL HDTVI CAM ?
you left the IR Lights ON on the other cameras
Yes there are some with them on , there are around 50 cameras…
Hi how do you login to the online page does camera need to be connected to laptop instead of the nvr and how do you get the I.p address
You can login to the nvr and if camera is connected to the nvr poe ports that’s still ok. Download SADP tool and find device on the network , then this will allow you to web login using IE and that IP address . Login to nvr and go to configuration, network ,advanced , others and enable “virtual host” , then go to system , camera management and login to camera using hyperlink
Hi is there a 8MP version ?
Not in colourVu currently no ☹
Hello, thanks for the video, just wondering on how do you access the inbuilt microphone on this camera? i've unscrewed the O ring that comes out like you did, just so you can drill it in, but how do you get inside so you can wire it to the cable so you can wire it up to the NVR etc?
Also what cables would you need for this?
I've plugged CAT 6 into the camera to the NVR, video works well and a 12 volt DC Power Supply into the camera but no audio is getting picked up, do you have any ideas?, thanks heaps
You don't need to do any wiring, It is an IP camera so the audio can be embedded with the video with just changing some settings, if you have NVR then go to the recording section, or if its standalone access directly the camera video setting and choose audio&video from the dropdown.
How about the 2mp version does it have audio??
Hi can you tell me what exposure setting you’re using in exposure time white balance setting WDR level + image enhancement as I can’t get it as good as you my friend Paul from Wales UK
Hi Paul, the Exposure is set to 1/12 by default and WDR as off, make sure there like this , and hopefully it will improve , good to see another from wales here 😊
Hi, I have the DS-7608NI-K2/8P NVR with firmware version V4.30.005 build 200628 . To that I have a DS-2CD2347G1-LU connected. For the life of me I cannot find the External Devices tab, to turn the white light on/off, anywhere on the NVR directly or anywhere when logged into the NVR via a browser. I have tried Internet explorer, Microsoft Edge and Opera, all to no avail. I have added the Web components but nothing changes. I have tried to access the camera's IP address which is shown in the Configuration/ Camera Management/ Ip Camera, tab but neither browser can access the address. The same for the camera's IP address on the package box. Any ideas, please, for where I am going wrong?
Hi , you can find it in the Camera web , to access this via the NVR Internet explorer, on the NVR go to configuration , network , advanced , others , then enable “ virtual host” and apply, the go back to the camera management tab and each camera will have a hyperlink to access the camera direct from that menu 😊
@@DVSLTD Great, thank you, much appreciated. I would never have worked that out. I guess that I would learn all of this, if I attended an installers course?
@@johnhowells4674 That’s ok glad to help , it may help yes but some of these topics are not covered in a single day
@@DVSLTD Makes sense. What is the best Hik course to start with first?
@@johnhowells4674 the entry one is the HCSA, then HCSP , then HIK-Central 😊
this may be a dumb question, but is the mic two-way ? (i.e., I can talk back to someone AND hear someone talking to the camera)
No, you will need a built-in speaker to do so, this model does not have it.
Can you run the light based off motion detection?
So it’s off by default, but if it detects a person in the detection area then the light turns on?
Hi All,
I have 3 x 4MP colorvu IP cameras but have had issues in totally Dard inviroments when the LED is disabled.
this is what I have found:-
personally I found it is better to turn off the LED light as the image is still very good without the light even in total darkness, it still looks like daylight however the resolution of the image does drop slightly. With the light off it also stops the LED attracting insects and spiders to gather around the lens and also rain and snow is not illuminated by the LED so the image is not blocked by illuminated rain.
THE PROBLEM I HAD IN VERY DARK AREAS
One problem I have had with my 3 colorvu cameras
1 x camera is at the front of the house and works great. The 2 at the rear work perfectly in the day but at the dead of night the refresh rate of the image drops down to every 10 seconds.
HOW I FIXED THE PROBLEM
I have found the best fix to this was running H.265 and dropping the max bitrate to around 500 - 1500kbps dropping the bitrate seams to get the image working again back to a good frame rate. The reason it only effected the 2 x rear cameras was due to the extremely low light levels. However the low bit rate causes problems in the day with sections of the image being grainy and so I have now opted back for the LED function set at max 10% in auto and this keeps the image smooth and clear in totally dark environments.
I Hope this helps
Hello mate can you get the white light to come on if motion is detected
Hi , not currently , I have put a request in 😊
Can you tell me if you could mount it flat on an outside wall without any other additions like a junction box or stuff like that?
is there enough cabling room in the back to fold up the cable?
Hi, it would be very hard to not use a backbox to be honest, if the cable can be pushed into the wall cavity then fine, if not then use a backbox
Thx. I dont like the whole backbox idea tbh since it will push it out an extra 5-10cm or so...
Lets try to open up the cable hole then :)
@@Hans82962 With you on that 😊
Any idea what recorder should be sufficient for 4 of those? Might take 8ch for future upgrade :)
I hope they add motion to the bright LED. I'll have it turned of for now anyway...
@@Hans82962 Hi, DS-7608NI-K2 and upwards will be fine 😊
Just reading the previous comments. It's a shame the light cant come on when motions detected like a normal PIR security light. Do you think colorvu are the future, better than a dark fighter? I'm thinking of buying this exact camera for my property. Thanks
Hi , it’s something we are working towards to get that function , and the colouvu is outstanding technology , I think it’s one of the best out there, the only consideration would be if its Pitch black and you DON’T enable the white light for some reason then the image would be poor , whereas Dark fighter has the ins built IR . 😊
Hi can you get any cameras that will work well in a totally unlit area at night
Yes , 99% of our cameras have built In IR for areas with no light or the new white light range that helps to illuminate the area with white light , we also have Darkfighter technology built in to a lot of the models in IP
@@DVSLTD cool my night images are not great I have Hikvision ip turret cameras
@@maryellis3661 This may be a simple setting on the IP camera itself , did you do the install or a dedicated installer?
What is NVR hikvision compatible with this camera with audio?
Please reply
Hi , I would use the K or the I series , 😊
Hi , I would use the K or the I series , 😊
Hi how do I control my 4mp ip colourvu leds with my control box
I currently have these cameras connected to the I series NVR and when viewing configuration online I don't have the external devices tab.. do you know why ? The other one I managed to turn the light off in my situation I find it better with the light off but can't remember how I managed it last time 🙈
Hello mate - I am not able to get any audio in my playback. Why is that? The recording stream is both "video&audio" and I have put the audio sensitivity as 100, but still no audio in the playback. In the live view I can hear the audio, but nothing in the playback.
Any suggestions?!
Go to your NVR, Settings > Storage > Schedule settings > Advanced > and click on Record audio checkbox.
Hi , is the “video&audio” on both main stream and sub-stream ?, and also please go to the storage section where you would set the storage schedule, then under that camera please select the “advanced /more” option and then enable the audio tick box.
@@DVSLTD Thanks- yes I did that and it works now. Read it on another forum :)
@@mrgud34 Thanks- yes I did that and it works now. Read it on another forum!
@@DVSLTD Hello mate - another question. I changed my camera password for it to be different than the NVR login password. But on doing so, it shows the user has been locked out and the camera is not visible on the NVR monitor anymore. Not sure why this happened. Any clue?
please send complete introduction on colourVu IP cameras LATEST TECHNOLOGY IN ORDER TO PURCHASE
Hi. How do you turn off the light on the outside of the colorvo cameras? Ive been through every setting i can find but cant see anyway of turning it off.
Hi jason , on the IP model , please login to the camera via the web interface and under settings and maintaince or system depending there is a sub menu called external device, you can adjust it there , and under image settings, you can change it to day mode also
@@DVSLTD Hi, im not seeing any of those options when i sign into the nvr via the web. ☹
I cant seem to access the ip address for the camera directly via a web browser.
@@jasonking1948 Hi jason , is the camera plugged into the POE port of the NVR?, if yes then please login to the NVR and navigate to the network and advanced section under the web , and then more settings and enable virtual host , then under settings tab look for camera management and click on the hyperlink next to the camera you want to access and this should then bring the correct web browser up
@@DVSLTD Hi there Daitech. Is there a way of logging into the IP camera setting remotely ? I'm assuming I need first port forwarding from 65001 to 65016. Is there any other way through IVMS 4200 ? Thank you
When I try to web browse into my DVR live view, it just shows blank squares on the page. It works fine on my phone app, so it can't be the connection. Any ideas? Thanks.
Hi , what web connetion are you using , ? internet explorer 11 should work fine , then install the plugin if asked , then select camera on left to view or press play 😊
@@DVSLTD hi, I'm using both Microsoft Edge and Chrome.
@@Dave78Man Please use IE11 , you should find no issues then, if you do please let us know , and check that no AV software is set to block this also 😊
@@DVSLTD I've sorted the issue now. I had the 'enable stream encryption' box checked. The problem is the onscreen menu has it shortened to 'enable stream'. It's only until you 'mouse' over it then it displays the full text. This has had me stumped since I set my system up over a month ago. Hope this helps for anyone else. Thank you anyway, I'm sure I'll require your assistance again 👍
@@Dave78Man Ah , I hate that option, glad you sorted it and always welcome , have a great weekend 😊
This camera has colorvu function and it has a very great night vision function . I can provide it
This is Ip camera?
Price
@@ravianandshetty4360 yesof course . this 4MP colorvu IP camera
@@ravianandshetty4360 190 usd
and this is easyip 4.0 product
My browser can't find my camera when i put in it's ip address. It finds my NVR no problem. Any ideas?
Got it now
is the camera on the network or via the POE port of the NVR?
HI can i turn the white light on/off from nvr or do i need to do it from the web browser.
Stephen Judge did you ever work this out. As I’m trying to find out how
What version software are you running
Software or firmware? Firmware would have been latest at the time but has since been updated 😊
@@DVSLTD the software. I'm trying to change the light settings with the 4200 but cannot figure it out.
@@blakea2219 Hi, to change the light setting please use the camera IP address and internet explorer, once logged into the camera direct you can then go to maitaince tabs and see the External device sub tab 😊
I love colour night vision but really don't like the idea of the light being permanently on attracting attention. Black and white night vision isn't as good but doesn't attract attention.
These cameras need a siren that can be remote activated.
There is a version with that, the /SL model can do this 😊
Hi I have camra ids-tcvm203 and 9 mega can help me active all camra
I cant seem to find the option to turn the light on my Camera please can u help me. i found a video online but the option just isn't there on my nvr. thank you
I have the same issue, did you resolve it?
@@davidowen5648 you need to be logged into the camera its self on its IP address not the NVR
Pls sir new model
Hi,
I have the colorvu camera with led light.. I get a red Circle in the middle of the Image on all of the cameras when the light is turned on.. what could be causing this?
Hi , could you send me an example please?
DVSLTD hi yes, what’s your email?
@@kishanraja9139 dave@dvs.co.uk
G'day mate. You reckon you can run through some more high end Hikvision products, like the IDS premium NVR....there are some of us who own these more high end products sadly.....and have no frekin idea how to setup... dumb but true. I speak for all the dumb cunts like myself out there who are too afraid to share the truth...that we are simply dumb... Cheers.
And can I buy 2 off you 👍
Hello there - is it possible for you to do a review video for this Hikvision camera on similar settings as shown in this video - ruclips.net/video/xerYRR4i7_4/видео.html
Will help appreciate if DS-2CD2347G1-L(U) is at par with, or better than NSC-NITECOLOR-DM2
Thanks!
Hi , the cameras on that video are HIK cameras , so they are the same 😊
@@DVSLTD yeah. Someone confirmed on another forum that Hik cameras are rebranded in the US
Love firom India' misba cctv
Is this poe ?
This camera is ridiculous it did not see your face from the other end of the room you’re in darkness when you walk past the camera the light was so bright it whited out your face having these on a domestic property would never be acceptable from a customer’s point of view. You kept on saying it was hurting your eyes how would a customer feel if this was in their porch it would blind them in the face what a ridiculous product
Thanks for the helpful comment , we have sold a lot of these , so there is a market 😊
Would i be able to install this inside a porch will the light reflect on the glass door
Rubbish!! Should’ve covered on setup and features. Time wasted in installation and white light