Can You Pound Fence Posts Anywhere?
HTML-код
- Опубликовано: 12 июн 2024
- 👉🏻 Rhino Multipro XA (gas): bit.ly/SWIRhinoMultiProXA
👉🏻 Rhino Hydraulic Pounder: bit.ly/SWIRhinoHydraulicPounder
👉🏻 All The Drivers: bit.ly/SWIPostDrivers
👉🏻 Manual Post Bender: bit.ly/SWIManualPostBender
👉🏻 👉🏻 Post Remover/Puller Jack: bit.ly/SWIpostremoverjack
Folks always want to know: "Can I drive here?" "Is it too rocky at my place?" It's never a question of CAN--simply a question of HOW. Let's walk you through exactly how to drive in rocky ground, and how to know when it's not working.
Need a quote? Have product questions? Need tools?
👉🏻 Check out the store: bit.ly/swifence
👉🏻 Call us at the shop and talk it over: 307-578-8040
👉🏻 Email us and get it off your chest: sales@swifence.com
Chapters:
00:00 - Gas
01:59 - Pneumatic
08:12 - Straightening Trick
09:43 - The Money
11:11 - Comparison
12:27 - No-Spin Posts
15:33 - Pulling 
Хобби
I remember driving a schedule 40 post 6 ft down, 50 inches out the ground ( 10 ft schedule 40 terminal) , driven with a hand pounder, to swing a 16 ft single swing gate with operator. That was 4 years ago, and it still swings perfect as the day I hung it. 😊
Always enjoy your videos. I need to find somewhere to rent one of these things to see if it will work with the ground conditions in my area.
You guys rock. Gonna get one of them yeller drivers soon
The postmaster welded to a 2.5” post is great idea to act as post anchor/tap root, I’ll have to take that! Very impressed with the Hyde rhino to get through that soil
What a great demonstration of the breakout force of a skid steer
Quick question: are you guys making any videos on that large project you guys are doing. Heard Mark talking about a job where you have 20+ guys working on the same site. Would be cool to see that. Love the videos guys! Keep up the great work
That IS supposed to happen, yes. Not exactly sure when, but we are planning for it. 👍🏻
Good work 💪
Concrete actually can cause a failure vs driven as it creates a fulcrum point for the post to snap at rather than the force being spread over the length of the post.
LMBO! I thought there was an additional video - sorry!! I will have to purchase a drill/ driver head with a well bit on it... none of this is going to work! You guys are great! Dan and his Underoos - Good Stuff for the Ladies!!! LOL!!
Excellent examples .. thank-you!
Glad you enjoyed it!
Great video. I used a nematic post driver called Man Saver from Roher MFG. Absolutely love it for driving 2 7/8" drill pipe.
No nasty comments here. I learned a ton. Thanks guys!
No worries!
If you ever quit fencing, you could start up a fitness channel starting with your jumping jacks. Don't forget to add music.
I've been in the fencing buisness for my entire adult life up north of you in Canada and instead of that peice of equipment that shall not be named have you guys ever looked into the talet equipment postmaster? I think it would benefit you guys as much as it does us! Love all your tips and tricks it's awsome because you guys basically fence identical to the way we do up here with a few slight differences! Cheers!!
We'll have to check it out.
I am pretty lucky as I just use a post pounder on t posts but I am not a fence company. Fencing used on garden plots. I do have a comment, please tell me that those orange shoes are steel toed. I am all about safety and require them on my jobs. I see you around some heavy equipment and those posts. You are doing great about getting the job done just want to make sure you don't get hurt!! Please keep up the great work and have a good dang day!!!
I've even worse ground up in far NE Washington state and I need to set wood posts. Any suggestions? My fallback is my Case 580 backhoe and concrete.
Would you ever use a skid-steer post driver attachment with postmaster posts? I'm doing a DIY project and want to drive the posts, but can't find the hand held drivers for rent anywhere. However, I can find skid steers available. Thanks
Are you able to put a barb arm or loop cap on it?
We don't have a skid steer but we do have a kx040 excavator with remotes. Up to 17gpm adjustable. Can that run the RHINO HPD 60 ?
Y'all have demonstrated that pounding is a great option. But as you said, it is an expensive option. To much money for the DIY'ER, just doing a backyard fence project. But thanks for the information.
The gas pounders can often be rented from tool stores or fence companies. Brings the cost down considerably.
When they come out and locate the gas lines and fiber optic, I like to use those markings to put my posts’ in a straight line.
Me too, it's like they already did the work for you lol. (Hit my first gas line last summer on a Friday afternoon)
🤣
Hey what size of pipe are you using in this video?
ss20 I think it was
I live in Clark near the Canyon. Recently bought fencing supplies (5”x10’ post, No Climb Fence and accessories) from you guys. Just curious… how are you guys able to drive post in Clark? I spent 4 hours putting in one post using my tractor. Will be renting an excavator to dig up rocks just to get the post in 3’ deep. I have some serious big rocks. I see fencing all over Clark and am baffled on how the fence lines are straight and post are spaced fairly even. Truly baffling to me.
It's extremely difficult. We have extremely large pounders with rock spikes, and really only recommend driving pipe since it's a smaller diameter--it'll drive through the tough soil conditions once you've punched it with the rock spike.
How deep would you go in a really wet clay soil for a 6’ fence?
My guess is 3'? ruclips.net/video/mc92svvCRFo/видео.html
What would happen if you attached some kind of a weight rack to the post, then used the gas driver? Asking for a person that only has a gas driver....Would it go deeper?
I don't think so. You're making the post heavier, but you're also lessening the impact the driver is having.
@@SWiFence but is “I don’t think so” the swi way?! I don’t think so… I think you should try it.
Instead of going to Wyoming, how about coming down here to Key largo to try and drive some posts!
Er... I think no. 🤣🤣
I’s like to collect all that rock for my home LOL
My only "nasty comment" is that I don't have one of those fence pounders!
My company still drives posts by hand.😢
😬
0:28 glacial till worst soil to work with.
All right you jokers let's see how you deal with nice sandy, silty soil that has little cohesion?
I'm impressed with you guys were able to bust boulders with that hydraulic pounder.
Wait are you the pool guy from TikTok?
If not he’s you twin!
I am!
I love posting pictures of my old payloader on 2 wheels pulling driven posts when the naysayers say they wont hold. I have a open invite to come hand pull a post in my yard. No one has took me up on the offer
Most farmers would have a tractor that would run the hydraulic driver .
Good point.
Fence post pounder for weed Wacker
$3800+ phking bk's for tht yellow toy..................! Haa
Obviously driving post doesn’t work, I mean… it’s irrelevant that you could barely pull them out of the ground, that being said, I am right and you guys are wrong and should stick with your day jobs. How was that comment? Lol.
Hey! Par for the course! 🤣