JF-17 Thunder New Cold Start Guide | DCS World 2.8 Update

Поделиться
HTML-код
  • Опубликовано: 20 дек 2024

Комментарии •

  • @GorbZZ
    @GorbZZ  2 года назад +3

    I apologize for the people in the back celebrating their games lol. Thanks for watching! :)

  • @crazykiwi1472
    @crazykiwi1472 2 года назад +6

    There is an engine mode switch down on the right of the throttle that you can set to "CMBT" to increase the thrust of the engine. You should also probably mention turning on nose wheel steering, and the taxi light. You should also use the trim switches to generate green "pitch trim" "roll trim" and "rudder trim" lights in the status panel to ensure the plane is trimmed out prior to takeoff.
    You did not mention that it is more convenient to ask the ground crew to rearm the plane before inserting the data cartridge. That way you do not have to pop the canopy and ask the ground crew to update the data cartridge after rearming.

  • @NikitaShirokov
    @NikitaShirokov 2 года назад +4

    pilot will pass out on high altitude since you forgot to turn of air knob after you plugged air mask. also as @martwint6 mentioned you forget to set HNS to GPS + INS. Also with ground crew option menu you can ask them to enter proper INS align data (the only missing part would be hedding and altitute; coordinates would be entered automatically)

    • @GorbZZ
      @GorbZZ  2 года назад

      Yep i did forget that now that I notice sorry honestly must have edited it out or just forgot in general my apologies

    • @AlenB29
      @AlenB29 6 месяцев назад

      Bro i passed out and died on the airbase in grayflag server with all weapons loaded bcs my pilot passed out and died on the ground due to the air not functioning what a horrible tutorial

  • @dannyrocker-w2m
    @dannyrocker-w2m 2 года назад +1

    4:15 - nah, if I remember correctly from GR and Chuck's guide you have to enter one more zero before hand. So 281ft = 00028. It is about INS. It must be exact.

  • @RedBloodCat1
    @RedBloodCat1 Год назад +3

    This tutorial is missing to many vitals things to be considered good, like actualy turning on air and gps + ins

  • @xLeTzGeTBiZZYx
    @xLeTzGeTBiZZYx 9 месяцев назад

    I love this video I hope you have other training videos I'm going to look through this is well done and I'm only halfway through the video

  • @mogumogu3686
    @mogumogu3686 2 года назад +2

    Thank you GorbZ for a very helpful video.
    Keep up the great work...👍👍👏👏

  • @serinusgranainobolborhynch868
    @serinusgranainobolborhynch868 3 месяца назад

    Gran tutorial, gracias!

  • @Rhinozherous
    @Rhinozherous Год назад +1

    Just press the Master Warning button to silence the warning.

  • @pjhaebe
    @pjhaebe Год назад

    Thanks for this. I've been using an older start sequence and the engine stops starting a few seconds after it starts to spool up

  • @Wildkakahuette
    @Wildkakahuette 2 года назад +2

    nice video, but you could have skiped the part when you enter the INS data by going into the new menu it work to :)

    • @GorbZZ
      @GorbZZ  2 года назад +1

      I 100% agree but I thought about it and someone would of made the same mistake unintentionally so I showed them how to utilize the knee board to get the same answer. I appreciate the feedback! :)

    • @Wildkakahuette
      @Wildkakahuette 2 года назад +1

      @@GorbZZ that what i tough :)

  • @MilitaryAir
    @MilitaryAir 2 года назад

    Thanks for the guide!

    • @GorbZZ
      @GorbZZ  2 года назад

      No problem!

  • @SAEVONIX
    @SAEVONIX 9 месяцев назад

    thank you for the video

  • @martwint6
    @martwint6 2 года назад +1

    You forgot to couple your INS with GPS!

  • @IAMSEYMOURMUSIC
    @IAMSEYMOURMUSIC Год назад +1

    you forgot to turn your oxygen on ;)

  • @fieeedahusssain8407
    @fieeedahusssain8407 2 года назад +4

    Pakistan ✌️✌️✌️