That's the setup I'm flying now same frame and motors just different stack and camera I love mine it's my go to quad it feels like it's on rails you will love it thanks for the video great job keep up the good work look forward to your next one
Will your pids work on mine I have been flying 4s and I'm not very good at tuning and I didn't know those motors would hold up to 6s I thought the kv was too high I appreciate the help
lowering the 48 kHz in BLheli to 46 or so gets you rid of the diagonal electric noise in the feed. same goes for 24kHz: change it to 27 or somet like that.
Loving my 2208 1700’s that I won. Waiting on a new stack to arrive so I can put them in the air again. So smooth and sooo much power on 6s. I probably should have gone 1800kv but the 1700’s are pretty efficient and i can go 6” with them.
My xing 2208 1700’s I won from you finally have a permanent home on my Flightone dolphin build.👍👍. Yep I’ve had them this whole time and haven’t installed them yet except to test them on another build a while back while waiting for motors for that one. Love the 1700 kv super efficient but I really wish I would’ve gone 1800 just for a few certain props I like to run for freestyle but the 1700 opens up a whole different set of options and higher pitch props for 5 and 5.5” 👍 I likes. Thanks again for that giveaway!
Nothing beats that sound!!! Some Americans think freedom sounds like an 8 cylinder engine on high octane fuel (or gunfire), but to me it sounds like a brushless motor ripping the sky in half! Long live FPV Freestyle! (RID is NOT for me!)
O’Brien FPV if your going on a 5” I’d say the 1800. I hav the 1700’s. Their great but I wish I would’ve gone with the 1800’s but I didn’t see them listed when I won the set from Albert during his giveaways.
ThomatoFPV depends on how you fly. I got 10 mins the Saturday on the 2208 1700’s with a 1300 6s pack. But only about a min and a half was hard flying, the rest was below 50% throttle.
Hey Albert. I had a question for you. Have you experienced any issues with these motors? I follow KababFPV and he mentioned something about a possible blheli/bf bug and said this:: "When you punch it and cut throttle quickly while pitching forward a little at the same time you get a slight wobble. Just slightly. It's really minor but it bothers me a lot. I hate the throttle curve of 2306 but it doesn't have that slight wiggle as much. It still does it however." I ask this because I just ordered a set of 2208 2450kv xing motors for my next build and I am a little worried now.
Albert Kim okay. If I happen to experience anything I will report back. Just curious have you found “the perfect prop” for these motors yet ? Just wondering which ones I might wanna try
Albert im wondering whether I should get the 2306 2450kv or the 2208 2450 version. I’m gonna build a 5 inch freestyle build and I mainly use 4s. a while ago I watched a kabab video and he only said good things about 2208 even tho they weigh a little more. Any suggestions?
I have not flown those motors on 4S so not sure how those motors will affect a 4S lipo. Compared to other 2306 motors at 2450kv, I think the 2208 1800kv on 6S is better... but that might be a lot to do with it being 6S
Are they a noticeable difference in the 2208 power apposed to 2306 or 2207 on 6s... I been runing the new eco emax motors and HGLRC 2306 motors and thought about something with more power...been thinking about trying the 2207 but i hear not much power differences between 2207 & 2306...? I ask this question because the title of this video...lol
So these motors are heavier but also have more top end and overall more grunt and responsiveness across the whole throttle band compared to 2207 or 2306. I think these are gonna be better for freestyle but too heavy for racing but I might be wrong about that. Yes, the difference is noticeable. It's not a huge difference like say going from a 2205 motor to a 2306 but the difference is there.
good work albert.was just wondering.i teach kids in my area to fly rather than trouble as i spent most my life inside.i have been donated from various tubers and companys lukyly enough.i wondered if you actually sell any of these micro kwads ore whoops at reduced price as we woulf br intrested for our progect.
@@AlbertKimTV move them out 1 hole, then use a plastic stack nut to fill the gap on the inner arm screw. You could also drill new holes in the sandwich plates. I had intended on doing this only if the arms were too loose the way I have it now. Works good. we should fly some time, I'm in Long Beach
Hey albert that is an Awesome build man! Love those motors, I might have to pick up a set of Low KV ones for my 7 inch endurance built... the 2208 size stator should give me the punch i need to have some fun with it.... Was that noise we were seeing in your FPV feed? or just how the camera look naturally? Im just wondering about the ESC and whether is might need a bigger CAP?
@@caseydimmitt2449 well, once they are past 14 dollars, I have to pay import duty, of about 20 dollars+20%. So now a 25 dollar motor is costing me 50 dollar. Now I can buy 3-4 of the cheaper motors. But this example is if I can get free shipping on the cheap motors.
Hi Albert, i have same stack. can you please advise on voltage/current meter setup/scale in BF? can seem to get it working right, either telemetry or adc current. Thanks in advance.
Dimension is different giving a slightly different throttle feel. After you fly about 1000 flights you might be able to tell the difference. Most beginners won't know.
Would someone mind explaining how to know what kv to get on a motor based on size or type or if you’re doing 4/5/6s? I am confused about that. Like if I am doing a 4s freestyle build , how I know what kv to buy ?
Assuming a 5-inch freestyle drone, here are some loose guidelines. Recommended motor for 4S would be 2207/2208/2306 between 2400kv and 2700kv. 6S, same motors but in the 1700 to 1800kv. 5S would be somewhere in between. 2000 to 2300kv?
I'm debating on whether to buy the 2208 1700kv or the 2207 1800 kv on 6s 5 inch. Which do you think I should get? I really like the red ones. Do you think I'll notice the difference?
I'm running the 2306 2450kv. These motors are so smooth, linear, and powerful. I really like the xing motors! 👍
I just scooped up 4 of these off one of my vetted sellers on EBay (2450's) for $30! Can't wait to build out this source one frame!
😁
That's the setup I'm flying now same frame and motors just different stack and camera I love mine it's my go to quad it feels like it's on rails you will love it thanks for the video great job keep up the good work look forward to your next one
Will your pids work on mine I have been flying 4s and I'm not very good at tuning and I didn't know those motors would hold up to 6s I thought the kv was too high I appreciate the help
I just used default betaflight pids... should also work for you on 4S if you are on 3.5.5 or above.
@@AlbertKimTV yea I'm pretty sure I'm running 3.5.5 thanks I appreciate the help
lowering the 48 kHz in BLheli to 46 or so gets you rid of the diagonal electric noise in the feed. same goes for 24kHz: change it to 27 or somet like that.
I didn't know this. Thanks for mentioning it.
good to know, I'll give it a try
Albert Kim did you try it and get rid of the diagonal lines?
pixelcomet is there a way to change it in blheli a?
How to change 24 to 27 khx in bl heli_s?
Loving my 2208 1700’s that I won. Waiting on a new stack to arrive so I can put them in the air again. So smooth and sooo much power on 6s. I probably should have gone 1800kv but the 1700’s are pretty efficient and i can go 6” with them.
My xing 2208 1700’s I won from you finally have a permanent home on my Flightone dolphin build.👍👍. Yep I’ve had them this whole time and haven’t installed them yet except to test them on another build a while back while waiting for motors for that one. Love the 1700 kv super efficient but I really wish I would’ve gone 1800 just for a few certain props I like to run for freestyle but the 1700 opens up a whole different set of options and higher pitch props for 5 and 5.5” 👍 I likes. Thanks again for that giveaway!
Nothing beats that sound!!! Some Americans think freedom sounds like an 8 cylinder engine on high octane fuel (or gunfire), but to me it sounds like a brushless motor ripping the sky in half!
Long live FPV Freestyle!
(RID is NOT for me!)
😁
I was just about to order the 2207 1700kv but should I get the 2208 1700kv
O’Brien FPV if your going on a 5” I’d say the 1800. I hav the 1700’s. Their great but I wish I would’ve gone with the 1800’s but I didn’t see them listed when I won the set from Albert during his giveaways.
Archer FPV 2207 or 2208 tho
O’Brien FPV if your going for freestyle I’d say go ahead and get the 2208’s, for racing their too heavy so I’d go 2207 for racing.
ThomatoFPV depends on how you fly. I got 10 mins the Saturday on the 2208 1700’s with a 1300 6s pack. But only about a min and a half was hard flying, the rest was below 50% throttle.
I want to use the 2450kv on 4s, How many Amps do they use on a 5050x3 Prop? I dont thinkt a 40A ESC is enought?
Thx
Hey Albert. I had a question for you. Have you experienced any issues with these motors? I follow KababFPV and he mentioned something about a possible blheli/bf bug and said this:: "When you punch it and cut throttle quickly while pitching forward a little at the same time you get a slight wobble. Just slightly. It's really minor but it bothers me a lot. I hate the throttle curve of 2306 but it doesn't have that slight wiggle as much. It still does it however." I ask this because I just ordered a set of 2208 2450kv xing motors for my next build and I am a little worried now.
I'm not sure what that is and I haven't noticed that on mine, but mine are 6S kv
Albert Kim okay. If I happen to experience anything I will report back. Just curious have you found “the perfect prop” for these motors yet ? Just wondering which ones I might wanna try
I've been playing around with the new Gemfan Hurricane props and those feel pretty good.
Haha felt the same after i tried some 2407 2500kv.. the flight feel was so much smoother i didnt want to fly my smaller motors anymore lol
Albert im wondering whether I should get the 2306 2450kv or the 2208 2450 version. I’m gonna build a 5 inch freestyle build and I mainly use 4s.
a while ago I watched a kabab video and he only said good things about 2208 even tho they weigh a little more. Any suggestions?
I have not flown those motors on 4S so not sure how those motors will affect a 4S lipo. Compared to other 2306 motors at 2450kv, I think the 2208 1800kv on 6S is better... but that might be a lot to do with it being 6S
Hi, nice flight and nice build! What PIDs and filters did you use? Thanks
Default PIDs. I didn't change anyything
Are they a noticeable difference in the 2208 power apposed to 2306 or 2207 on 6s...
I been runing the new eco emax motors and HGLRC 2306 motors and thought about something with more power...been thinking about trying the 2207 but i hear not much power differences between 2207 & 2306...?
I ask this question because the title of this video...lol
So these motors are heavier but also have more top end and overall more grunt and responsiveness across the whole throttle band compared to 2207 or 2306. I think these are gonna be better for freestyle but too heavy for racing but I might be wrong about that. Yes, the difference is noticeable. It's not a huge difference like say going from a 2205 motor to a 2306 but the difference is there.
that quadcopter looks great, motor sounds very nice
good work albert.was just wondering.i teach kids in my area to fly rather than trouble as i spent most my life inside.i have been donated from various tubers and companys lukyly enough.i wondered if you actually sell any of these micro kwads ore whoops at reduced price as we woulf br intrested for our progect.
where are you located? shipping pretty much kills all this.
@@AlbertKimTV im uk albert wich i realise is far lol.its no worries if not.its just some funds donated fot what we do.
i built the same frame and motor combo but run 4s and 6" props. They fit if you move the arms out.
How do you move the arms out?
@@AlbertKimTV move them out 1 hole, then use a plastic stack nut to fill the gap on the inner arm screw. You could also drill new holes in the sandwich plates. I had intended on doing this only if the arms were too loose the way I have it now. Works good.
we should fly some time, I'm in Long Beach
oh cool... Not up there very much... was at a whoop race in LB recently. Are there places to fly outside over there?
@@AlbertKimTV I almost went to one of those in the wood shop in Signal Hill. I fly parks around here. Plenty to choose from.
Great motor Review!!!
👍😀👍
Is it appropriate to use these motors (2208 1700 kv) on a 7 inch long range quad?
You can do it, but it's not optimal.
Hey albert that is an Awesome build man! Love those motors, I might have to pick up a set of Low KV ones for my 7 inch endurance built... the 2208 size stator should give me the punch i need to have some fun with it.... Was that noise we were seeing in your FPV feed? or just how the camera look naturally? Im just wondering about the ESC and whether is might need a bigger CAP?
it has a big cap, but I think my BLHeli settings need tweaking according to another comment.
Those motors look so sick... It is a pity they are so expensive. My limit per motors is around 13-14 dollars.
If they last longer than a 15 dollar motor, aren't they cheaper?
@@caseydimmitt2449 well, once they are past 14 dollars, I have to pay import duty, of about 20 dollars+20%. So now a 25 dollar motor is costing me 50 dollar.
Now I can buy 3-4 of the cheaper motors.
But this example is if I can get free shipping on the cheap motors.
Sorry to hear about the very high import duties. Try aokfly.
@@caseydimmitt2449 don't be sorry. Healthcare is great here.
I just went with the 3b 2306. They are great. Found them on sale. Perfect motors.
@@pippifpv my healthcare last year cost me 20k US for family of 3! Where do you live?
Hi Albert, i have same stack. can you please advise on voltage/current meter setup/scale in BF? can seem to get it working right, either telemetry or adc current. Thanks in advance.
Scale is different on every stack, motors setup etc....
You'll have to calibrate it yourself... and actually mine is slightly out of calibration too. Even if you got my numbers it will still be off.
Wow... Beautiful build, Albert!!! Really fantastic! 😃
Great flying too!
Thank you!
whats the difference between these and 2207 or 2306? is it the dimension ? or power ? or lipo usage?
Dimension is different giving a slightly different throttle feel. After you fly about 1000 flights you might be able to tell the difference. Most beginners won't know.
@@AlbertKimTV what about physical measurement dimensions , i want to put it on a armattan rooster but dont know which one will fit .
@@rawpicsfpv3516 specs sheet looks the same dimensions except the height .
Would someone mind explaining how to know what kv to get on a motor based on size or type or if you’re doing 4/5/6s? I am confused about that. Like if I am doing a 4s freestyle build , how I know what kv to buy ?
Assuming a 5-inch freestyle drone, here are some loose guidelines. Recommended motor for 4S would be 2207/2208/2306 between 2400kv and 2700kv. 6S, same motors but in the 1700 to 1800kv. 5S would be somewhere in between. 2000 to 2300kv?
Okay great thanks man. Could you maybe elaborate a little more as to why as you go up in cell battery count that you drop the KV?@@AlbertKimTV
Nice build.
What about vtx????
what about it? I talk about it in the video and the review video to it is linked in the description
I'm debating on whether to buy the 2208 1700kv or the 2207 1800 kv on 6s 5 inch. Which do you think I should get? I really like the red ones. Do you think I'll notice the difference?
2208... I like those more.
@@AlbertKimTV Thanks for responding. Love your videos!
@@AlbertKimTV Now, would you take the 2208 1700kv or 1800kv?
I put those on my smooth operator 👍👍👍👍👍
+1👍
everyone loving them. they sound so good!
i only don't like hollow shafts
What's you instagram mate having trouble finding it? Love the videos keep them coming.
My bad found it haha
Emax eco next please!!
I just uploaded a video of the 2208's with 7056 prop 4s.. on my channel.. have a look if you want! Very good motors!
niiiiceee!
nice
Roogi? Is that you? Haha
lol
It is not the review of the motor :(
This motor is sold1.2 us dollar now. I can make a flying drone in cheap way
😁
@@AlbertKimTV can you share us which size of motor paddle u use