Great review! Love the b-roll. I fly 2306 for freestyle because of it's better low throttle stability, and 2207 for racing because of it's better top end power and efficiency (I'm pretty sure 2207 has better top end efficiency because when I had to race my freestyle quad I killed more batteries, despite the much lower KV and a throttle cap).
depends on which batt you’re using. Those 2 kv motors must use different number of cells in a battery. Usually, 6s on 1800 and 4s on 2450. 1800 reaches higher rpm than 2450
It's OK if I'm using them with this 30.5x30.5mm MAMBA Stack Basic F405 MK3 F4 Flight Controller F50_BLS / F50_BL32 50A 3-6S Brushless ESC for RC Drone FPV Racing Blheli_S? ( I'm new to this.)
If your motors are getting hot then it's your tune, not the motors. Test out some Five33 Champion Edition motors if you want the best motor out there in my opinion. Fast, light, and efficient. Trust me, you can thank me later.
@@arbelcasquejo2336 then it is something mechanical like a loose arm or loose motor screws causing vibrations to get through. And set your rack to 48khz pwm frequency and set the motor timing to 23 degrees.
They're great motors for sure - but their durability isn't great. I've smashed five in the past 2 months. Switching to Tmotor now. But for the money they're far from the worst motors you can get.
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
The pro is back 🤟🏻
Glad to be back haha! Gonna try to post a lil bit here and there. Gonna be a little difficult with school but I’ll try to make it work!
Nice quality videos and content, I wonder why you done get much viewers. Keep it up!!
Thanks Man!
Great review! Love the b-roll. I fly 2306 for freestyle because of it's better low throttle stability, and 2207 for racing because of it's better top end power and efficiency (I'm pretty sure 2207 has better top end efficiency because when I had to race my freestyle quad I killed more batteries, despite the much lower KV and a throttle cap).
This is true! 2306 felt a little more stable in low throttle that’s for sure. But the different isn’t like night or day for me tbh.
Think I'm going to buy a set of these for my next build, they only cost £10.95 each in the UK.
Thanks for the review. Can I run this 1800 kv on 4s for a smooth flight?
Awesome video. I have a 6s build on the way and considering this because its the cheapest option for me without compromising much of the quality.
I have these on 3 quads. Best bang for the buck!
Nice 🤙
Awsome vid! Am I right about the higher KV, the faster it will spin per voltage? So if you pick 2450 will that be faster than the 1800?
depends on which batt you’re using. Those 2 kv motors must use different number of cells in a battery. Usually, 6s on 1800 and 4s on 2450. 1800 reaches higher rpm than 2450
@@beege4481 got 3s and picked 2750
@@beege4481 4s with 2700kv will reach more speed than with 4s and 2450kv???
It's OK if I'm using them with this 30.5x30.5mm MAMBA Stack Basic F405 MK3 F4 Flight Controller F50_BLS / F50_BL32 50A 3-6S Brushless ESC for RC Drone FPV Racing Blheli_S? ( I'm new to this.)
What’s the nut size for this m5?
Hey man, you still flying? Hope all is well
i will use these to fly myself
Very good!
What is the best cheap goggles and controller
If your motors are getting hot then it's your tune, not the motors. Test out some Five33 Champion Edition motors if you want the best motor out there in my opinion. Fast, light, and efficient. Trust me, you can thank me later.
My motors is heating but I am just using the default set up and tunning of inav configurator
@@arbelcasquejo2336 then it is something mechanical like a loose arm or loose motor screws causing vibrations to get through. And set your rack to 48khz pwm frequency and set the motor timing to 23 degrees.
@@TheCloudwalkerFPV how to do it on inav?
ive been flying with these for a while and i love them. great video dude stop by my channel sometime
For sure man! These are killer motors!
They're great motors for sure - but their durability isn't great. I've smashed five in the past 2 months. Switching to Tmotor now. But for the money they're far from the worst motors you can get.
yh i had a minor crash into some metal beams and it bent 2, still flew but tons of vibrations so imma try the tmotor velox v3 now
Good ❤️💓
1800kv aint shit