Please Please Please make an option of the e1 with big matte side buttons or just the same coating of the base as the side buttons if thats possible id buy one when these restock
i found user manual, but why when i press left button while mouse is switched off and after keep hold left button then switch on mouse, the indicators dont show anything. i just can see all indicators which shows that mouse is switched on
@@ivanivlev2686 when you hold the left button, it just powers on the mouse, shows the current settings. To change each individual setting you need to hold the right button for a couple seconds, it will adjust which setting from report rate / dpi / button latency you adjust. If you reset the mouse by holding M1+M2+M4+M5 while turning the mouse on, it would go back to the default settings which include 4K hz
We don't know about your display setting, but the color is red, if you check our product page it should be clearer comparing it to the other orange models, lighting may affect how it is perceived
@@RASTINEZRALLES if you check our product page in the site will be more accurate as you can see orange and red side by side, the actual color is tomato red but may be affected by monitor and lighting on the video
@@VAXEE i have checked the site and still think it's orange than red 😅 Maybe i have to try the real one ? 😁 I'm living in Thailand so will it be available here ??
@@RASTINEZRALLES if you check the wireless mouse page and not just E1 it would show other models orange side by side with the red, red difference should be clearer. Yes it will be available through MSR
I tried my first Vaxee, AX, recently, I loved it. I just hope there will be a new mousewheel, or the material on it gets changed, I cant believe for 159$ we get this material on it, it's slippery, no easy grip on it and very light. Overall it's 10/10 mouse, brought my aim back after trying many other mice. o7
@@jUNiORCS in the product page if you scroll down theres comparison with AX. It is slightly longer with shorter back (not as much palm filling) and it has a new sensor and is lighter
I really like the darker, more saturated blue used for the E1! Please, please, please release a 60g NP-01 4K with a darker, more saturated Pink or Green or Purple. I've bought Ax (wired), XE, XE-S 4K, NP-01s, NP-01 (wired) and a couple PAs, but just missing that perfect weight and color NP-01!!
I like to put my index finger around the tallest point of the left-button on the EC2 (i.e. the outer left lip of the left button on the EC2, it's slightly behind the scroll wheel and then go to the absolute left of the button), but it looks like the E1's main buttons are cut too forward and cut too narrows, I wish the main buttons cutout is slightly larger, just a few more mm towards the rear of the mouse and more towards the outer edge so that I can rest my index finger on the highest and left-est point of the left-button. I feel like this is why Zowie doesn't put an edge lip on the EC2 so that we can put our finger anywhere we want, but the cut-out buttons of Vaxee mice dictates too much where we should put our fingers.
Sorry about that, as our mouse has a seperate button design for improved click feeling, it has less flexibility on where to place the finger than a design where buttons are part of the shell
It is something we are studying. For battery indicating we only have the lights on the mouse for 100%-61% (two lights), 60%-21% (top light), 20%-10% (bottom light) and blinking by itself when under 10%
I love your mice for the comfort and the grip.. but the only thing that made me switch to another mouse was the lighter weight. I think that for the E1 with 60.5 grams it will be incredibly good
naaaaw :( I just bought the NP-01 Wireless 4K YESTERDAY and now this is announced. Where does the NP-01 sit now with a more aggressive ergo (E1) and ambi (XE)?
@@yaybub_yaybub NP-01 is semi ergo, we have shape comparison of it in our site to AX and EC2 it can give you an idea how it compares to typical ergos, it is less tilted
I'm hoping for a light pink colorway in the future. Just bought my ax wireless after using a couple ax wired, had no idea this moise came out🤦♂️ I'll keep an eye out if I need a new mouse in a couple years or so
@@bepo8958 hope you will enjoy it as you did your wired AX. E1 is a different shape that fills the palm less than AX so if you like AX shape the most, you shouldn’t be missing out
I do love the shape of the AX, so no regrets! I do wish the AX would get the upgrade to the button wobble and response time, we'll see what happens tho! Thanks for the response, I love y'alls mice.
Since we released less colors and wanted to offer new options, we released the more standard white and black together with new navy blue and red. We may have other colors in the future depending on demand
It's just hard to justify this for its price, with all of the EC2 shapes on the market right now. I don't see the E1 standing out in any way. Wish there were more EC3-like shapes. There are no modern EC3s.
At the moment we are not planning for different size of E1 and sorry it does not interest you, we're happy if people find the right mouse for them no matter what! :)
@@VAXEEsound good i hope someday you will release web driver software with simple functions like macro record keys. People in my country (somewhere in SEA region) love your mouse in term of shape and quality but sadly we dont play only FPS we play MMORPG too and requires to using some Macro to play good. Other people end up with changing mouse or buy another mouse they have macro program ( me too) my point is if vaxee have the thing like i said it’s will be perfect In term of shape and quality vaxee is king and you will get new customers from mmorpg games fans who have a problem with uncomfortable mouse when using 5-8 hours for sure.
@@oliverjames8580 software is not our area of expertise nor has it been a consideration for us since we have always made our mouse plug and play only. Sorry that even we are studying it we have no timeline on when we would have such option no matter how simple it may look.
@@VAXEE I think it is disrespectful to your regular "customers" not to offer them the possibility of buying your "wired" products. If you only manufacture ELECTROMAGNETIC RADIATION emitters from now on, you will only harm people's health and I WILL NOT BUY YOUR PRODUCTS anymore. If that makes you happy?
I think it is disrespectful to your regular "customers" not to offer them the possibility of buying your "wired" products. If you only manufacture ELECTROMAGNETIC RADIATION emitters from now on, you will only harm people's health and I WILL NOT BUY YOUR PRODUCTS anymore. If that makes you happy?
@@Tamizero the demand for wired mouse is low er and lower and we have limited manpower so we focus our efforts into wireless mouse and other new products.We totally understand that some people prefer wired mice but we are not able to locate resources to wired mouse development presently, sorry for disappointing and hope you can find your ideal wired mouse with a different brand.
You should make it WIRED for those of us who only buy the mouse WIRED, just like the other models, you should give us that opportunity to choose too. We don't want ELECTROMAGNETIC RADIATION, which is so harmful to humans. Make it WIRED PLEASE!
Braindead take, electromagnetic radiation is unavoidable even if you live in a log cabin miles away from population, and it is not harmful to us. Have you coated your walls in foil yet?
XE-S Wireless Architecture Description:
ruclips.net/video/qiRuTHrnlVU/видео.html
Hi Vaxee, does this use the same skate design as any of your other mice? I am looking forward to try out various aftermarket skates on this mouse.
@@paul2609 hi, same design as AX
@@VAXEE Thank you, it's so nice when companies replies back, already pre-ordered the red :)
Please Please Please make an option of the e1 with big matte side buttons or just the same coating of the base as the side buttons if thats possible id buy one when these restock
@@Beyeitze we have no plan to have a different material in side buttons, sorry.
I asked for red colorways on a previous video, and you've gone and done it! Red is going to match my setup so well. Thank You!
vaxee always cooking
edit: lets see zywoo use it and it become the most used esports ergonomic mouse
I will be purchasing tomorrow! As a fan of the AX, this is a must have. Thank you Vaxee!
Hey, how do you adjust polling rate, lod and click speed on this mouse?
@@solicit178 at the bottom of the mouse, right button holding for few seconds will change which setting you adjust; DPI, Report Rate or Button Latency
First premium mouse was a ec2 and this mouse imo is the best ergo on the market as of rn
where i can find tutortial info about bottom button funtions, how to switch to competitive mode? i cant find any info
i found user manual, but why when i press left button while mouse is switched off and after keep hold left button then switch on mouse, the indicators dont show anything. i just can see all indicators which shows that mouse is switched on
is it auto switches to competitive mode while i use 2000-4000hz?
@@ivanivlev2686 when you hold the left button, it just powers on the mouse, shows the current settings. To change each individual setting you need to hold the right button for a couple seconds, it will adjust which setting from report rate / dpi / button latency you adjust. If you reset the mouse by holding M1+M2+M4+M5 while turning the mouse on, it would go back to the default settings which include 4K hz
Maybe my display isn’t that accurate.. but doesn’t the „red“ look closer to orange?
We don't know about your display setting, but the color is red, if you check our product page it should be clearer comparing it to the other orange models, lighting may affect how it is perceived
yeah im thinking the same 😂 it looks more orange than red for me
@@RASTINEZRALLES if you check our product page in the site will be more accurate as you can see orange and red side by side, the actual color is tomato red but may be affected by monitor and lighting on the video
@@VAXEE i have checked the site and still think it's orange than red 😅
Maybe i have to try the real one ? 😁
I'm living in Thailand so will it be available here ??
@@RASTINEZRALLES if you check the wireless mouse page and not just E1 it would show other models orange side by side with the red, red difference should be clearer. Yes it will be available through MSR
I tried my first Vaxee, AX, recently, I loved it.
I just hope there will be a new mousewheel, or the material on it gets changed, I cant believe for 159$ we get this material on it, it's slippery, no easy grip on it and very light.
Overall it's 10/10 mouse, brought my aim back after trying many other mice.
o7
Both the old and new voices are fire! Also, any plans to implement 0ms debounce settings on the XE-S?
Yes we do plan firmware update for the other models, is under testing
how do i get one theyre all sold out :((((((((
whats the difference with outset AX?
@@jUNiORCS in the product page if you scroll down theres comparison with AX. It is slightly longer with shorter back (not as much palm filling) and it has a new sensor and is lighter
I really like the darker, more saturated blue used for the E1! Please, please, please release a 60g NP-01 4K with a darker, more saturated Pink or Green or Purple. I've bought Ax (wired), XE, XE-S 4K, NP-01s, NP-01 (wired) and a couple PAs, but just missing that perfect weight and color NP-01!!
Glad you enjoy the color but sorry there is no plan for changes or new colors of NP-01 currently
Any chance of getting an update on older models to get 0 ms latency on buttons ?
We do plan to have a firmware update for other models for this, it is still under testing
I like to put my index finger around the tallest point of the left-button on the EC2 (i.e. the outer left lip of the left button on the EC2, it's slightly behind the scroll wheel and then go to the absolute left of the button), but it looks like the E1's main buttons are cut too forward and cut too narrows, I wish the main buttons cutout is slightly larger, just a few more mm towards the rear of the mouse and more towards the outer edge so that I can rest my index finger on the highest and left-est point of the left-button.
I feel like this is why Zowie doesn't put an edge lip on the EC2 so that we can put our finger anywhere we want, but the cut-out buttons of Vaxee mice dictates too much where we should put our fingers.
Sorry about that, as our mouse has a seperate button design for improved click feeling, it has less flexibility on where to place the finger than a design where buttons are part of the shell
No doubt best ergo mouse ever made on earth.
I miss Prasad's voice but yours is good too
Is there any software on the horizon? I would love an accurate way to track the battery life
It is something we are studying. For battery indicating we only have the lights on the mouse for 100%-61% (two lights), 60%-21% (top light), 20%-10% (bottom light) and blinking by itself when under 10%
Please Make a video on how to adjust the mouse with the buttons
It’s extremely user unfriendly and confusing
that blue color be looking good tho
Reminds me of my old blue EC2
I love your mice for the comfort and the grip.. but the only thing that made me switch to another mouse was the lighter weight. I think that for the E1 with 60.5 grams it will be incredibly good
How does it compare to Zowie ec3-c?
A bit longer and taller, feels bigger in-hand
How does it compare to ec2-A?
In our product page there is a shape comparison if scrolling down, it has the same size, the main difference is the rounded tail design
Can't wait!
naaaaw :(
I just bought the NP-01 Wireless 4K YESTERDAY and now this is announced. Where does the NP-01 sit now with a more aggressive ergo (E1) and ambi (XE)?
@@yaybub_yaybub NP-01 is semi ergo, we have shape comparison of it in our site to AX and EC2 it can give you an idea how it compares to typical ergos, it is less tilted
@@VAXEE I thought that was the case. Still excited for it to arrive nonetheless. Really happy to support this brand :)
I'm hoping for a light pink colorway in the future. Just bought my ax wireless after using a couple ax wired, had no idea this moise came out🤦♂️ I'll keep an eye out if I need a new mouse in a couple years or so
@@bepo8958 hope you will enjoy it as you did your wired AX. E1 is a different shape that fills the palm less than AX so if you like AX shape the most, you shouldn’t be missing out
I do love the shape of the AX, so no regrets! I do wish the AX would get the upgrade to the button wobble and response time, we'll see what happens tho! Thanks for the response, I love y'alls mice.
when will be the refresh for XE wireless or are you guys exploring new shapes?
from the current shape lineup only NP-01S has a confirmed revision coming later this year / early next year
ive been wanting one sooo fkn bad
@@1lukeCS if it is out of stock in your region, it will restock by end of this month
@@VAXEE ok great, ill keep rechecking weekly. Im in NA
How similar is it to the ec2-cw?
In our product page there is a shape comparison if scrolling down, it has the same size, the main difference is the rounded tail design
the guy doing the voice over woke up with a hangover that morning 😂
What kind of switch do u use???
@@micejaykay7173 mechanical huano
How does it compare to EC2 in hand? Bigger or Smaller ?
same size
@@VAXEE But the in hand feeling ? i need a little smaller than ec2. and bigger than ec3
@@hootangofi in-hand feeling more like ec2, just the back side cutoff may make it easier for you to grip it if you hold in that area
@@VAXEE Tnq for reply , means alot.
Nice weight... i prefer the smaller EC3 size though.
maybe next year?
No any plan for a smaller size
I am surprised yelloe color is not popular enough for release
Since we released less colors and wanted to offer new options, we released the more standard white and black together with new navy blue and red. We may have other colors in the future depending on demand
How does it compare to Lamzu THORN
Thorn is closer to the AX shape, E1 is longer and with a shorter back than Thorn, fills the palm less
@@VAXEE tysm
Hope can ship it to other countries too
If considering to APAC region, sorry we did not resume sales over there
Will the E1 be available in wired form?
@@pinenut3718 no such plan, we have stopped wired mice production some months back
Best Ergonomic Esports mouse cming 👀
Damm I like the blue and red, I don't know which one to pick.
No hate but what happened to the old announcer?
@@MeyKoo no longer available
What mouse are they talking about ? Ec2?
We do compare with EC2
do XE-S and E1 use dustproof wheel encoders? All my last mice from major companies always had faily wheels..
They don't and they have mechanical scroll wheels, not optical
@@VAXEEthats sad, gonna be a pass from me then, can't stand switching mice every year because wheel dies
@@Lekser sorry about it
Any chances for glossy finish?
No plan for other type of coating currently
It's just hard to justify this for its price, with all of the EC2 shapes on the market right now. I don't see the E1 standing out in any way.
Wish there were more EC3-like shapes. There are no modern EC3s.
At the moment we are not planning for different size of E1 and sorry it does not interest you, we're happy if people find the right mouse for them no matter what! :)
DAV3 Hyperspeed..
@@joyousjoyous2136 It is not an EC3.
1. Does E1 have same mouse feet sizing as AX?
2. Is the feel of the scroll wheel closer to XE-S or AX Outset?
1. Same
2. Closer to AX
@@VAXEEThat's what I love to hear!
i live in india is there any way i can get a vexee mouse . i realy like vaxee mouse a lot 😢😢
Delivo it.
😢o😢@@Napst3r_IN
Use a forward delivery company in Australia or USA then ship it to India.
We do not have service in India, sorry
Legendary cs players SpawN and heaton
Please we want software to change DPI as we wish.
or at least an option we can change DPI in 50 or 100 steps.
Software is something we look at but have no immediate plans for
We need a better platform for the mouse, easy dowload
@@IsabelEsparzaGalvis not sure what’s the meaning? There is nothing to download for E1
about time someone comes out with red and blue. The only thing i’d say is they should have white accents and not black.
00:30 oh ... here comes that Finalmouse scroll wheel vibes 😁
RIP SEA MArket
Sorry about we don't have solution to resume sales in SEA currently
Bump
Ec2
Why does only the xe-s have such an ugly scrollwheel texture? :c
sorry we just try a new texture but not everyone appreciate it
Shame about the terrible EU price
Our base price is the same worldwide, US price is before tax and EU price is after tax. Sorry about it.
just bring some web driver software Vaxee might be on top again
No immediate plan but it is something software is something we are studying
@@VAXEEsound good i hope someday you will release web driver software with simple functions like macro record keys.
People in my country (somewhere in SEA region)
love your mouse in term of shape and quality but sadly we dont play only FPS we play MMORPG too and requires to using some Macro to play good.
Other people end up with changing mouse or buy another mouse they have macro program ( me too)
my point is if vaxee have the thing like i said it’s will be perfect
In term of shape and quality vaxee is king
and you will get new customers from mmorpg games fans who have a problem with uncomfortable mouse when using 5-8 hours for sure.
LOL kinder left behind, im using 8k responses in RAZER
It is not something we are considering for the moment, sorry
RIP ring finger
Lol
@@VAXEE no, seriously, it will be pinched by a button for sure
@@AerowaIk it shouldn't, if you get one and experience this, please let us know
@@VAXEE thank you, looking forward for the release
Vaxee people, before making a video, please cut your nails...Believe me, is gonna look more cleaner.
damn thats expensive for a computer mouse, think i'll stick with my ec2-a
Just develop a driver
This is something we are studying but no immediate plan for one
@@VAXEE Cmon. A simple driver like Logitech Onboard memory manager is not that hard
@@oliverjames8580 software is not our area of expertise nor has it been a consideration for us since we have always made our mouse plug and play only. Sorry that even we are studying it we have no timeline on when we would have such option no matter how simple it may look.
WIRED PLEASE make wired this mouse please!
@@Tamizero sorry no plan for wired models
@@VAXEE Then I won't buy it, I think there is a WIRED Pulsar Xlite v3 that is practically identical, I will buy that Pulsar.
@@Tamizero as long as you find the product you are happy with, we are happy, sorry we do not offer the product you’d want
@@VAXEE I think it is disrespectful to your regular "customers" not to offer them the possibility of buying your "wired" products. If you only manufacture ELECTROMAGNETIC RADIATION emitters from now on, you will only harm people's health and I WILL NOT BUY YOUR PRODUCTS anymore. If that makes you happy?
@@Tamizero Bro you made me cringe hard.
I think it is disrespectful to your regular "customers" not to offer them the possibility of buying your "wired" products. If you only manufacture ELECTROMAGNETIC RADIATION emitters from now on, you will only harm people's health and I WILL NOT BUY YOUR PRODUCTS anymore. If that makes you happy?
@@Tamizero the demand for wired mouse is low er and lower and we have limited manpower so we focus our efforts into wireless mouse and other new products.We totally understand that some people prefer wired mice but we are not able to locate resources to wired mouse development presently, sorry for disappointing and hope you can find your ideal wired mouse with a different brand.
You should make it WIRED for those of us who only buy the mouse WIRED, just like the other models, you should give us that opportunity to choose too. We don't want ELECTROMAGNETIC RADIATION, which is so harmful to humans. Make it WIRED PLEASE!
Braindead take, electromagnetic radiation is unavoidable even if you live in a log cabin miles away from population, and it is not harmful to us. Have you coated your walls in foil yet?