Wishing the best for your friend that has cancer. It’s a rough one. I bought a 2015 kx450f and day after I bought it. I was diagnosed with colon cancer and esophagus cancer. And was told not to ride bikes. Haha. I had my colon removed and now waiting for my esophagus surgery. Love your channel brotha. I. Bought some tickets for this bike raffle.
I’m sorry to hear that my man! I hope surgery goes well for you and you have the opportunity to keep twisting throttle in the future. Thanks for entering for the CR and best of luck. Appreciate the support on the channel, glad you’re enjoying the videos!
@tightropehikes6994 exactly. For 1/2 copper pipe there are 1/2 inch collars or couplers. The ID of the coupler is 1/2 inch. The OD of 1/2 pex is 1/2 inch. The 8 or 10 mm bolts pass through the ID of the pex nicely, that and a washer where required makes for a quick and easy spacer. As light if not lighter than aluminum (guessing).
Cant believe you made us wait less than a weak for anothe episode Also as a tip i would recommend using antiseize or other grease lubricant when tapping just in case the tap breaks and it helps it tap easier
I put a 16 fender and number plate on my 2002 stock clamps. The Pryme restyle bracket takes care of the number plate, but the bottom clamp isn’t straight in the middle. It curves out and doesn’t allow the fender to sit back far enough. I would have to cut a big piece out to allow it to come back where I want it.
Hey man huge fan of the build series, you have an exceptional attention to detail! Wanted to ask what your bench grinder/buffer set up is for restoring bolts. Apologies if you went through this in a previous vid
You may remember my previous comment about how you inspired me to revive my 1993 yz250. I got it running probably just as good as it did 30 years ago and I'm starting to freshen it up now. It's got gold protaper bars and I need to take it to a cleaning wheel to get imperfections and scratches out. What paint would you use to repaint it? I'd like to stick to gold, thanks in advance.
hey so if i go to buy entries and win hopfully !, where abouts are u located state wise ? im Canadian and would like to know how far i would drive to pick up ? gunna buy at least 10, so it would be amazing to know thank u :), keep making the amazing vids !
Hype for more episodes on this sweet bike! Unrelated but do you have the name of the tool you used to get the kickstarter off the spline on the KX250 build? Currently in that exact situation
@@KincadePavich Awesome thank you!!! Could not for the life of me figure out what it was lol. Ended up getting mine off with the blow torch and a gear puller of all things but honestly that tire lever might end up in my mailbox anyways because ive been needing some.
Hi at the 6,20 u show 2 front fender, i want buy the front fender show at the LEFT but i'not sure for type anf model for fit on my crf 450x 2015 (the triple clamp is original honda) anyone has a link ? is UFO or acerbis or original years ? tk for info!
FINALLY ANOTHER EPISODE!!
Wishing the best for your friend that has cancer. It’s a rough one. I bought a 2015 kx450f and day after I bought it. I was diagnosed with colon cancer and esophagus cancer. And was told not to ride bikes. Haha. I had my colon removed and now waiting for my esophagus surgery. Love your channel brotha. I. Bought some tickets for this bike raffle.
I’m sorry to hear that my man! I hope surgery goes well for you and you have the opportunity to keep twisting throttle in the future. Thanks for entering for the CR and best of luck. Appreciate the support on the channel, glad you’re enjoying the videos!
Oh fun fact! To make spacers... I've used 1/2 inch pex waterpipe inserted into 1/2 copper collars. Works great.
What’s a copper collar?
Like a 1/2 copper coupling? Like water pipe?
@tightropehikes6994 exactly. For 1/2 copper pipe there are 1/2 inch collars or couplers. The ID of the coupler is 1/2 inch. The OD of 1/2 pex is 1/2 inch.
The 8 or 10 mm bolts pass through the ID of the pex nicely, that and a washer where required makes for a quick and easy spacer. As light if not lighter than aluminum (guessing).
@@danielsimpson8929 just call them couplings plz.
As a plumber I’ve never done that, but I’ll keep that in mind ✌️
Damn!! Even a small video with high quality 👌 thank you sir ride safe can't wait til the next video!
I have the exact same fender and triple clamp issue on a 2004 CR250R. Thanks for the video, this will help a ton!
Finally had enough extra money to enter. Good luck to everybody. I'm keeping my fingers crossed. The spike is it's gonna be a masterpiece kincade.
Let's gooo good luck!!
That thing is going to look awesome I can’t wait to see the finished product
Very good custom work mate 👍. I have been waiting for a new CR250 vid for a while.
Cant believe you made us wait less than a weak for anothe episode
Also as a tip i would recommend using antiseize or other grease lubricant when tapping just in case the tap breaks and it helps it tap easier
love this guys energy
This build is going to be hard to beat.
by far the best cr out there
I put a 16 fender and number plate on my 2002 stock clamps. The Pryme restyle bracket takes care of the number plate, but the bottom clamp isn’t straight in the middle. It curves out and doesn’t allow the fender to sit back far enough. I would have to cut a big piece out to allow it to come back where I want it.
Keep them coming! I love these videos 🎉
Bike is coming together very nicely
This build is looking insane
deam very great work this build gonna be sick
Don’t you just love it when you get an email to say you have won lol
Can always mount the fender and wheels and unscrew the fork cap and sink the tire all the way up see if it hits...just thinking out loud here haha
Hey man huge fan of the build series, you have an exceptional attention to detail! Wanted to ask what your bench grinder/buffer set up is for restoring bolts. Apologies if you went through this in a previous vid
It's the Harbor Freight one! And I use Pryme MX wheels on the buffer side.
Great work sir ! Well done 🤟🤙👆
That’s awesome
You may remember my previous comment about how you inspired me to revive my 1993 yz250. I got it running probably just as good as it did 30 years ago and I'm starting to freshen it up now. It's got gold protaper bars and I need to take it to a cleaning wheel to get imperfections and scratches out. What paint would you use to repaint it? I'd like to stick to gold, thanks in advance.
VHT/DupliColor are good paint options!
I just picked up a 2002 KX 65 with the number 111. Coincidence?
Damn she is looking good!!! So are those 815 bikes😉😎
hey so if i go to buy entries and win hopfully !, where abouts are u located state wise ? im Canadian and would like to know how far i would drive to pick up ? gunna buy at least 10, so it would be amazing to know thank u :), keep making the amazing vids !
I will deliver or ship the bike! You could pick it up too. I live in Bozeman, Montana! Thanks for the support.
Hype for more episodes on this sweet bike! Unrelated but do you have the name of the tool you used to get the kickstarter off the spline on the KX250 build? Currently in that exact situation
Thanks man! That was a motion pro tire lever haha!
@@KincadePavich Awesome thank you!!! Could not for the life of me figure out what it was lol. Ended up getting mine off with the blow torch and a gear puller of all things but honestly that tire lever might end up in my mailbox anyways because ive been needing some.
Rock on u a pro bro
Do the restyle kits work in 4 strokes?
great video
👍👍👍
Hi at the 6,20 u show 2 front fender, i want buy the front fender show at the LEFT but i'not sure for type anf model for fit on my crf 450x 2015 (the triple clamp is original honda) anyone has a link ? is UFO or acerbis or original years ? tk for info!
The one on the left is the Polisport restyle front fender from the latest gen kit. I don't think it will fit a 2015 CRF450X.
I have already buy triple clamp down original years cross model ( i have enduro).... and fender ftont polisport but not fix all
Frame guarda mark?
Where can i found the hydraulic clutch?
Motosport, Rocky Mountain!
Use the pro taper cover
No. You Rock
New Subcreber Sir🙋🇵🇭
Is this and a give away and if so when does it end
Yes it’s a giveaway! All the details are on my website to get yourself entered! kincadepavich.com/win/2023-honda-cr250/
I love the vids
No mai
Con guerra e u piccoli
I would love to buy a bike from you.
What’s up brotha
You're are so handsome man❤
Thanks bro ❤️
🙋❤👍🇵🇭🤗
shes lookin 🥵