How To Make A Gold Miami Cuban Bracelet YOURSELF (Easier Than You Think!)

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 208

  • @SlavaTVOfficial
    @SlavaTVOfficial  Год назад +6

    💎💎Jewelry Business Academy Course jewelry-business-academy.teachable.com/p/jewelrycourse💎💎

    • @richviolent7625
      @richviolent7625 11 месяцев назад

      please make the how to cast your own jewelry video and a cuban with tighter links video! need that

    • @yungjohnson76
      @yungjohnson76 3 месяца назад

      Definitely signing up soon

  • @mikemike9881
    @mikemike9881 Год назад +98

    Yo since watching your video on starting a jewelry business about 3 years ago I started doing my own casting and diamond setting. I’m pay about $2.05 over spot price for 24k gold. I save a ton of money setting the stones myself. Thanks for introducing me to the industry

    • @MrCabreraO
      @MrCabreraO Год назад

      Hey Mike,
      Would you share some insight on where to purchase the gold. It would be greatly appreciated!

    • @h.katsaros1790
      @h.katsaros1790 Год назад +1

      Who pays for the shipping?
      Buyer or seller?

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад +4

      Amazing! Thanks for sharing, wishing you tons of continued success!

    • @dizthewize
      @dizthewize Год назад +4

      How did you go about learning the casting and diamond setting? Online courses? I’m currently looking for some decent teaching resources

    • @parispee901
      @parispee901 Год назад

      How much did you spend on casting equipment ?

  • @cruzjames8853
    @cruzjames8853 Год назад +18

    These videos are literally the best! PLEASE upload that video on how to cast your own jewelry!!!! it would help out so much

  • @Gwong-Woo
    @Gwong-Woo 10 месяцев назад +1

    Whats the smallest mm cuban link that one could make with this method?

  • @kyokushin2229
    @kyokushin2229 6 месяцев назад +6

    Jewelers in my country sell these for 3k$++ in half the size, i did this and made my own cuban 10mm 10karat 52grams for 1800$ and polished myself. Now i got people asking where i got it from🤩

    • @ashleysilvester2086
      @ashleysilvester2086 4 месяца назад

      What was the length?

    • @kyokushin2229
      @kyokushin2229 4 месяца назад +1

      @@ashleysilvester2086 about 18cm not sure what that is in inches maybe 7.5

    • @kyokushin2229
      @kyokushin2229 4 месяца назад

      @@ashleysilvester2086 i used gold coins though since they are tax free in my country. If i bought gold from refinery etc or imported it would be 25% more cost which would actually still be cheaper than a jeweler too but why pay more than you have too🤩

    • @ashleysilvester2086
      @ashleysilvester2086 4 месяца назад

      @@kyokushin2229 okay thanks!

  • @brandonclarke308
    @brandonclarke308 Год назад +2

    Back with another one God bless you!

  • @brandonbutler7281
    @brandonbutler7281 Год назад +2

    I am completely appreciative of u for doing this, continue to be the best in help others my friend to be business minded, I am in the military look to do a side hustle and I am going to take this step.. thank u brother to the best youtuber

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад +2

      Thank you for the kind words and thank you for your service

  • @SPLURGINWITMROC
    @SPLURGINWITMROC Год назад +1

    Im joinin for sure and can you make a video on making custom gold pendant custom diamond pendants I want to specialize in custom jewelry for future clients

  • @jusjus3146
    @jusjus3146 Год назад +5

    Love how you go in detail! Great video

  • @YvngCas
    @YvngCas Год назад +6

    I searched for how to edit the gap (pretty sure I bought the exact same file you’re using for yours) and i cannot find any useful information. An in-depth video on how to create pins and edit link gaps would be a great video idea in my opinion and would be very, very helpful. You the GOAT.
    Edit: Also making sprues for files without sprues on the links

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад +4

      Appreciate it. In Rhino you do a boleanmeshsplit. I will do a vid on it

    • @YvngCas
      @YvngCas Год назад

      @@SlavaTVOfficial thank you. I know you hear it a lot but you truly giving folks million dollar information and im trynna really run with it to success as are many others who follow your advice.

    • @mosesferreira200
      @mosesferreira200 Год назад

      @@SlavaTVOfficial could you expand on this please thanks keep up the great work

    • @milkman4376
      @milkman4376 4 месяца назад

      @@SlavaTVOfficialI need some help creating that gap larger. Are you still planning on making a video? Or any quick advice that you can share?

  • @AnonymousVap3s
    @AnonymousVap3s 6 месяцев назад +1

    This is literal gold

  • @apexvisuals6385
    @apexvisuals6385 Год назад +3

    Bro I’m joining whatever you put out.

  • @jeffreykorenman5795
    @jeffreykorenman5795 Год назад +1

    Bro watches bust down need need that video on how to do it from step 1 please and thank you so much I’m in nyc and I’ve started making jewelry because of your videos

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад +1

      Love to hear that, I will make a video about that

  • @Fendisadventures
    @Fendisadventures Год назад +1

    Where do you download these files from?

  • @CyberZeakurity
    @CyberZeakurity 3 месяца назад

    I’ve been binge watching a lot of your videos, and have been putting aside money to pull the trigger. Would you recommend Cuban braclets as the first item to make? Or maybe you have another video of yours you can recommend me to. I guess my question is if you were to focus on two items to start making for business, what would you suggest?

  • @YungDonDeNero
    @YungDonDeNero Год назад +1

    Ever since I saw your first video I have gone out and bought a 3d printer, used cg trader to hire CAD specialists to design my first custom piece and a jeweler that will cast and polish it for me till i put together the rest of the equipment to do it all! Appreciate the knowledge brotha!

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      Thank you bro!

    • @AA-fu1ni
      @AA-fu1ni Год назад

      How do you sell your pieces?

    • @YungDonDeNero
      @YungDonDeNero Год назад

      @A A I haven't started selling any pieces yet. I'm in the process of getting my first one complete to learn all of the ins and outs of it being made first.

    • @baymaster20
      @baymaster20 Год назад

      How it come out

    • @g..3095
      @g..3095 2 месяца назад +1

      @@YungDonDeNero any update?

  • @blancdaprophet
    @blancdaprophet Год назад +1

    Can you make a video how to edit an stl file if the designer messed up

  • @akgoldbear7669
    @akgoldbear7669 Год назад +1

    The bracelet is shining! 👌🙂

  • @keez2100
    @keez2100 Месяц назад

    What can I use as an alternative for the burn 3d printing resin jewelry casting.

  • @traesicwiddit27
    @traesicwiddit27 3 месяца назад

    Can you give me more information on how to cut a big enough gap on the open links?

  • @CreativeChroniclez
    @CreativeChroniclez Год назад +5

    Thank you for another fire video and the price breakdown of the cost 🔥👍 always appreciated.

  • @NayaSeitzer-65n
    @NayaSeitzer-65n 3 месяца назад

    Nice video Slava TV, I actually just purchased a $3.00 Cuban chain so inexpensive necklace from Fensty’s Flea market with my dad, and I am loving my necklace

  • @yungjohnson76
    @yungjohnson76 3 месяца назад

    I’m having issues with printing and also teeth mold issues and castings sometimes just don’t cast past the spues

  • @respecteverybodynohate9637
    @respecteverybodynohate9637 Год назад +9

    I will legit buy jewelry from thid guy

    • @therealsyxx
      @therealsyxx Год назад

      Absolutely

    • @wildz57
      @wildz57 Год назад +5

      You’re missing the point. Why buy jewelry from him when you can make jewelry just like him. He’s giving you the game

    • @respecteverybodynohate9637
      @respecteverybodynohate9637 Год назад +1

      Ik but still if I got to ill buy from him

    • @LuckyStarr86
      @LuckyStarr86 Год назад

      @@wildz57free game at that 🙌🏾

  • @Manjhoni
    @Manjhoni Год назад

    that bracelet flawless plug me in

  • @aishamysticjeweler5544
    @aishamysticjeweler5544 Год назад

    Greetings, your videos are excellent, could you share the link of that bracelet

  • @antuna0658
    @antuna0658 8 месяцев назад

    I'm new to all of this i'm trying to get into it..thanks for the info

  • @NVKjewelry
    @NVKjewelry 8 месяцев назад

    I use a couple of casters in the district, could you point me one that specializes on Miami Cubans?

  • @cinister2004
    @cinister2004 9 месяцев назад

    can you do a video showing how you made the gap bigger?

  • @Nash0303
    @Nash0303 Год назад

    Not all heroes wear capes... thank you!!

  • @Mastaslick.
    @Mastaslick. Год назад

    Im tryna join yall get ready. Thanks for all the info

  • @jayydakidd4592
    @jayydakidd4592 Год назад +2

    I’m still
    Learning gotta make a 3 hour drive to Miami jewelry district to make my first piece simple Miami Cuban ring

    • @danielhernandez1852
      @danielhernandez1852 4 месяца назад

      Hey bro I live in Florida as well and I have to drive a few hours to Miami too to cast and make jewelry. Do you have social media? Let’s connect.

    • @g..3095
      @g..3095 2 месяца назад

      @@danielhernandez1852 im in south fl too and trying to break into the industry. Id be down to connect and grow together fosho

  • @h.katsaros1790
    @h.katsaros1790 Год назад +1

    Who pays for shipping? Love your videos

  • @christopherrapp5954
    @christopherrapp5954 Год назад +1

    Thanks again for the videos you put out. They are really awesome. Im ordering the mars 3 pro tomarrow. I all ready have a friend who wants a 3 piece set . 14k hollow miami 10mm x 22 and matching bracelet 10mmx7 with a 10mm ring.. . This is my first client hopefully with many more to come.. any advice would help.. thank you

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      Thank you bro I appreciate it! Please let me know what you need help with I will be more than happy to help!

  • @alexportillo3798
    @alexportillo3798 Год назад

    Is it possible to make a only earring and ring jewelry business? I want to do everything at home it’s gonna be something I do in the side and I can use machines to do it all

  • @1SLaurent
    @1SLaurent Год назад

    Can you do a video on silver bracelets?

  • @tonystark19631
    @tonystark19631 11 месяцев назад

    Can you share your polisher info? I'm in DTLA.

  • @CreativeChroniclez
    @CreativeChroniclez Год назад +1

    Can we get a video on making custom micro pave pendants 🙏

  • @trickyplays240
    @trickyplays240 Год назад

    If we’re going to start a business, how do we know what to make? Should we just make random stuff and hope or do we try to get commissions from customer?

  • @jerryking-humphrey2175
    @jerryking-humphrey2175 10 месяцев назад

    How do you make a Herringbone Patter???

  • @netanelostrov3425
    @netanelostrov3425 Год назад

    You are amazing!!! Thank you so much for this:) Could you perhaps upload information on how to do this with platinum?
    Cheers
    Nate

  • @buyselltrade6270
    @buyselltrade6270 Год назад +3

    Slava is one of the best content creators on RUclips. It's insane that you don't have 1 million+ subscribers.

  • @SebiGable
    @SebiGable Год назад

    Brother! Any idea if there are these types of services available in Canada?

  • @GoruGoruNoMi
    @GoruGoruNoMi Год назад

    When making a chain would it be practical to find someone to put the chain together or do I have to manually link the chain myself

  • @rrmedia6730
    @rrmedia6730 11 месяцев назад

    My issue was my 10g ring cost 70$ per gram in Seattle. I had them cast it and polish it. Was a casting house not jewelry store. That’s when I gave up on designing and 3d printing

  • @maligems
    @maligems Год назад

    Bro make video on how to remove or clean extra gold after casting jewelry

  • @hussles
    @hussles Год назад

    Appreciate all the information in all the videos. Keep loading and I’ll keep watching just subscribed to channel

  • @zacharyancona1610
    @zacharyancona1610 Год назад

    I appreciate you bro just bought all the supplies I need to cast my own jewelry I live in bk I have everything except for a polishing machine it's not that it's too much money it's that i don't know the skills of polishing jewelry I'm just worried about the loss of gold I'm focusing on making 14kt for lower weight pendants chains and rings. what is your advice should i polish the jewlery my self and collect the gold with an arbe polishing machine that has a built-in gold dust collector or i have to bring my cast pieces to a professional polisher

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      I say try it out and see what you like more, I would pay someone who is skilled to teach you that's the best way to learn. If its too much of a hassle you can always pay someone to polish

    • @1988bctmk
      @1988bctmk Год назад

      Polishing yourself saves $$$ but takes time and effort to learn correctly.
      Maybe start out aging someone and erecting cash flow and take the financial hit. Then when you have capital or are selling volume you may just find it better for you time and profit margin to keep doing so, especially if you are doing volume and develop a relationship with the polisher and can get a better rate.

  • @Pigporker
    @Pigporker Месяц назад

    I have a 3D printer and I can solder myself. What direction should I go in? I want to make Cuban brackets and chains for myself and friends and family (moneys no issue)

    • @SlavaTVOfficial
      @SlavaTVOfficial  Месяц назад +1

      If you can solder and polish then your only expense will be casting

    • @Pigporker
      @Pigporker Месяц назад

      @@SlavaTVOfficial thanks bro. I’m down to do everything myself and get all the stuff as a hobby and if I get good I’ll make it another business. What would you recommend to get started for someone looking to make their own jewelry and maybe set stones on some bracelets and chains

  • @jesusvirruete4127
    @jesusvirruete4127 Год назад

    I’m a newbie bro, can I ask what u mean by we should aim on paying 1.50 over the spot price ?

  • @thefricanrican
    @thefricanrican Год назад

    Can we get the links to cast gold ourselves

  • @nolimitteezy
    @nolimitteezy Год назад

    What are your printer settings for this resin? I just upgraded to the mars elegoo 3 pro

  • @MrMadanibarry
    @MrMadanibarry Год назад

    If I don’t want to put links myself where can I go to do that

  • @Rolanditou
    @Rolanditou Год назад

    I can't find that POWERRESINS Primer strong adhesive resin, where is that from?

  • @AnimatedHoodStoriez
    @AnimatedHoodStoriez 3 месяца назад

    Yo bro I want to learn how to make jewelry and I got a bag for you bro , I have a couple questions though , is it no way to talk otp with you?

  • @thickwenis
    @thickwenis Год назад

    Solid video. thank you for making these videos

  • @theoverdosebeat
    @theoverdosebeat Год назад

    Can you upload the STL/3dm file?

  • @josktinify
    @josktinify 5 месяцев назад +1

    Nice 😎 bro

  • @JohnWick-mi8lq
    @JohnWick-mi8lq Год назад

    Great content bro!

  • @TraeTheGreat
    @TraeTheGreat Год назад

    How did you edit the file to make a bigger gap

  • @Jsmith-sg1rq
    @Jsmith-sg1rq Год назад

    Please make a video on how to cast.. thanks

    • @sghutner
      @sghutner 4 месяца назад

      Gonna happen ,just wants to sell machine and resin

  • @lyricallysodoperecords2331
    @lyricallysodoperecords2331 Год назад

    This was amazing brorher you did a wicked job on it is there anyway you could create some gold chains & Pendants for me ?

  • @von2782
    @von2782 Год назад

    I heard if you microwave the resin too heat it up before 3D printing it comes out more crisp and the uv rays are more effective. What you think about that?

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      A never do that, I've never had issues with prints

  • @MindOfADon
    @MindOfADon Год назад

    Appreciate you!! Your content is fire.. brought my printer & taking a trip to NY after I get my designs finished.
    Can you discuss $1.50 over spot? I understand that price is based on forming a relationship with a caster. What is a realistic price we can expect to pay for quality casting? From research I see on reddit, jewelers are claiming $1.50 is unrealistic & that $3 is a beyond amazing deal..
    Thanks for all your info.. giving everything a try & documenting my results on my channel!

    • @respecteverybodynohate9637
      @respecteverybodynohate9637 Год назад +1

      1.50 I was saying how can he even get that even for chains it be like 2 mm yet be so much even if it like 4 grams and it be 10k

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      Thank you I appreciate that. Yes that price is based on relationships, most will start you out at $3

    • @respecteverybodynohate9637
      @respecteverybodynohate9637 Год назад

      @Slava TV man I be getting charged for example i have talk people down and they be giving me 4 to 5 grams abd it 14k

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      what city are you in?

  • @liuberlaffita1539
    @liuberlaffita1539 Год назад

    How did you polish the link inside?

  • @jahnyeh5516
    @jahnyeh5516 Год назад

    No software came with my printer bro, what software is that?

  • @geertje0105
    @geertje0105 Год назад +1

    Thanks

  • @drowzzzy1631
    @drowzzzy1631 2 месяца назад

    Can you only make this type of link by casting it?

  • @franciscopulido6040
    @franciscopulido6040 Год назад

    ❤ do I need to buy the wash station and uv cute machine also ?

  • @Lolitadarkmusic
    @Lolitadarkmusic Год назад +2

    Amazing video as always! You help so many peeps!! Highly educational 🎉

  • @mloud687
    @mloud687 Год назад

    Once you get the gold casted is it gold plated or is it solid gold? Also if it is only gold plated can you ask them to make it solid gold rather than plated

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад +1

      if you get gold casted its solid gold. You can plate any metal. In order to make a non gold plated ring solid gold you would have to make a new ring

  • @kevindejesus7420
    @kevindejesus7420 Год назад

    Where can I buy gold so I can start making jewelry ?

  • @SS-hz4jo
    @SS-hz4jo Год назад

    Classic video. Thank you so much.

  • @CMedia87
    @CMedia87 Год назад

    can you shows us how to make edits?

  • @RADIOKNIF3
    @RADIOKNIF3 Год назад

    So i understand that a lot of jewelers buy chains in bunches and if theyre more thicker then they make it but does that only go for cuban style chains? What about ropes, snake and other styles? If we need thicker ones.

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад +2

      yes that applies to all chains, the labor on those chains are less

    • @RADIOKNIF3
      @RADIOKNIF3 Год назад

      @Slava TV is it possible to cast a rope or snake chain or would we need special equipment?

  • @BossPresident
    @BossPresident 10 месяцев назад +1

    Nice, the real way by hand doesn’t use a printer but cool either way.

  • @AJ-sm1wz
    @AJ-sm1wz 10 месяцев назад

    Is this solid or hollow?

  • @Memezytshorts
    @Memezytshorts Год назад +1

    so you need prob over £2000 to start because you also have to make all that inventory

  • @elitegamer1706
    @elitegamer1706 Год назад

    Yo wassgud my man so I dont got a jewlery district in my state does it work if I call the one in L.A and see if I can send the wax in mail or they dont do that? thanks for your information

  • @provgoldgroup
    @provgoldgroup Год назад +1

    Slava!
    Peace Brother! Can't say enough about the appreciation I have for these very informative and insightful videos you've produced and shared here on your channel to give the inexperienced person behind the scenes access to the jewelry industry who has an interest and desire to break into it.
    I'd like you to consider doing a video(s) on the following:
    1. The entire breakdown of the Miami Cuban Link chain, specifically about all the exact measurements, and the different types of box lock clasp designs, mostly on the larger chains. Are there standard measurements, or can you design it however you like in a sense? I particularly want to know what's the gap/space measurement between each link? I've seen several exact-sized chains with various link gaps, but both are Miami Cuban Link chains.
    2. All of the economics around the costs associated with each stage of making a Miami Cuban Link chain, or whatever piece, just sharing all the numbers in one video. I learned a lot about all the industry standard numbers above the spot price incurred from manufacturing jewelry yourself that you've shared, but they were spread across multiple videos, versus in one single video. And it'd be cool to offer a PDF document download of all those numbers to have a "cheat sheet" if you would that could be referenced prior to negotiating in person and/or via phone. Also include the numbers (percentage) of what would be received/paid out from a refiner for melting down scrap gold and/or gold jewelry (I believe you said 98% of the spot price), which is great to know so you're always aware what your state of liquidity is in dollar amount. Which again, as you stated makes this a win/win business you can't really lose in.
    3. Stamping: 14k mark on chains and a company logo on box lock clasps.
    Most appreciated!

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      Thank you bro, I appreciate that and I apologize for the delayed response. I will absolutely break all of that down. I forget to mention in this video that the reason why I lost so many grams compared to the last chain is because this bracelet was filed down just like a handmade one, and that's why labor was so expensive

  • @AJ-sm1wz
    @AJ-sm1wz 10 месяцев назад

    whats good caster in florida ?

  • @SuspectLA-r2i
    @SuspectLA-r2i Год назад

    any polishers or diamond setters you recommend just start with this jewelry

  • @vision3690
    @vision3690 10 месяцев назад

    Nice thanks bro

  • @gooniesfan7911
    @gooniesfan7911 Год назад

    I have capital to start I am highly interested in doing 90% in house. Is stainless steel the best metal to use for practice? And cheap gems like CZ etc? Anyone want to work together on this?

  • @AliHyder-er3vg
    @AliHyder-er3vg Год назад

    Brother how you convert 8mm file into 12mm file

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      Simply resize in chitubox, change the percentage to 150

    • @AliHyder-er3vg
      @AliHyder-er3vg Год назад

      Bro can I also change the size of diamond cuban links on chitubox?

  • @therealsyxx
    @therealsyxx Год назад

    Can someone tell me how to find a person to make me a chain. I have the gold. I've honestly been thinking about starting a jewelry company.

  • @gnvisuals7262
    @gnvisuals7262 8 месяцев назад

    How much for you to make a piece for me ?

  • @oRealAlieNo
    @oRealAlieNo Год назад

    Rappers should get a diy kit

  • @alonzoblack4493
    @alonzoblack4493 Год назад

    Wonderful 🎉

  • @hrattrayjr
    @hrattrayjr Год назад

    My problem is sales. Ebay had nothing but fraudulent buyers. What's the most effective way to sell jewelry if you don't have the resources to open a store front?

    • @eski_truv
      @eski_truv Год назад

      Start your own website and social media pages. Funnel your social media engagers to your website.

  • @okekedumebi2322
    @okekedumebi2322 Год назад

    Please how do I contact you 🤝

  • @nathanmorley2573
    @nathanmorley2573 Год назад

    Wish it was that easy

  • @maligems
    @maligems Год назад

    Bro how many mm is this bracelet

  • @senpaiclothing-ho3ng
    @senpaiclothing-ho3ng 27 дней назад

    fire

  • @camcomeup
    @camcomeup Год назад +1

    So how do I know
    A.) How big/thick to make links?
    B.) How big to make holes?
    C.) How many links to print?

  • @harmeetbrar9043
    @harmeetbrar9043 Год назад

    The biggest trouble I have with making pieces from a 3D printer is the trying to polish a super intricate design, please help

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      what kind of design are you making?

    • @harmeetbrar9043
      @harmeetbrar9043 Год назад

      @@SlavaTVOfficial Hey Slava, its a Skull RIng that has a lot of detail and spots that are hard to polish

  • @mczmv
    @mczmv Год назад

    Твой брат Влад очень помог мне. Спасибо вам что делитесь такой ценной информацией. Скажи, реально ли реализовать подобный бизнес в странах СНГ, такие как Казахстан или Россия?

  • @noto031
    @noto031 Год назад

    You have the best most informative videos I’m waiting on the how to cast your own jewelry video that’s what I been trying to learn for a long time god bless you for putting out this information you the best man 💯🙏🏼

  • @mohamednasr261
    @mohamednasr261 Год назад

    How can I get in contact with you?

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      Please send me an email, you can find it on my channel under the About section

  • @em6824
    @em6824 Год назад

    I started watching your videos around 2 years ago. Started getting into it myself. Got the 3d printer. Same site you use for the 3d prints. Got 5 Oz of 24k bars from an online dealer. And when I went to casters and jewelry makers, they all gave me a hard time. They saw how I was cutting out the middle man to max my profit. And it took forever to even get 1 cuban made. It was crazy how hard of a time I was getting. They all questioned why I wouldn't just get them the same way they did. Had clients lined up to get Cubans for less than the jewlers were selling for and still make a profit. Quick nickels vs. slow dimes. But getting held up by these people put a stall on my side business.

    • @SlavaTVOfficial
      @SlavaTVOfficial  Год назад

      Thank you bro, where are you located?

    • @em6824
      @em6824 Год назад

      @@SlavaTVOfficial massachusetts

    • @baymaster20
      @baymaster20 Год назад

      @@em6824how’s it going I’m trying to do this in California

    • @em6824
      @em6824 7 месяцев назад

      I put it on hold... I plan on getting it started back up by next year. But this dude and his info is legit. When you start, I hope you have better luck than when I started.