When the malaguti went forward on the stand. I've gotta admit. My heart beat raised a little😂 definitely could hear ricer miata in the background on a youtube video. 👍😁🇬🇧
Happy to see your new video really cool storage merch will definitely be looking forward to the finish of this thanks guys unfortunately rainy day down here in Florida
Ive been rebuilding minarelli engines since i was 16.. 38 now. Always use C3 bearings they are actually rated until 16k rpm. C4 gives to much play allready. Factory uses c3 to. Never knew why c4 became a hype, but ive used c3 on race engine builds like forever Always use steel cage ones. SKF 6204 C3 is the best
I remember the side stand on my buddy's malaguti foggy was a pain in the ass, it limits how far you can lean over on left turns a lot. We took it of because it was waiting for a accident.
those polini bearing look like they have plastic bearing cages, and as far as i know you're not supposed to put bearings with plastic cages in the freezer. Because it can make the plastic brittle and can cause them to break. But it might depend on the particular bearings that you have.
buddy i was in bed falling asleep watching as i do everynight and i jumped out of bed laughing it make me laugh that much i had to put a quick comment i think 101%of people that do engine build for moped
wow bro how cool is that rear light from honda elite jdm wow and what setup did you choose bro i am new and crank from malossi and lower polini i would like to know celinder haha 🤣😅 grz mopboyzbelguim
@mopboyz i have malaguti 100 cc but it has electronic speed limit on 100 kmh, what do i have to make it go faster than that can you show me because there is no video for that on youtube and you probably know
Hey Trevor, I'm working on a 1990 Honda SB50 right now, You have a source on a JDM bubble tail light? I know you had one at one point, so I figured I'd ask.
Definitely an issue. Scooters are pretty good on fuel. Unless they're heavily tuned and modified. The float in the carb could be stuck open. Could also be a leak from the tank or the petcock if you have one.
I wish I had random parts like that box because my bike need lighter rollers and and stronger contra and I’m broke Trevor hook a brother up I’ve bin watching for two years
If you need another side stand for a F15/F12 I have a Brand new one that I never touched I can send you £15 + p&p 👍 also I have a new front panel for the F15 & a Handel bar pannel for F12/F15 new
why are you with the malaguti who is original all those crazy things ? you have a unique scooter in new condition and then you're going to screw it up like that. They default why then? malaguti f12 has never fitted that, the hood always had to be demolished. cylinder you should have ordered original from malaguti f12 itself and the original exhaust from f12 now you turn an original thing back into an encrypted scooter. in the Netherlands you would give yourself a laser. bijnons is original holy we even build these scooters in the Netherlands to original have stickers come over from Italy all original parts let's come from italy and you're going to screw him up.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
When the malaguti went forward on the stand. I've gotta admit. My heart beat raised a little😂 definitely could hear ricer miata in the background on a youtube video. 👍😁🇬🇧
hahha didn’t realize how close it was to falling over till i saw the vid
Most underrated youtuber out there
That malaguti looks so clean, here in the netherlands you cant not find them in good condition or insane prices
Deserved a full tear down that bud - lovely machine.
Love the way you put this video together bro! Very detailed and informative ! You're getting alot better at this I see. Good luck on the build🗣️💯
thanks my dude!
Currently throwing a new stage 6 pro replica crank in my phantom f12. Thank you for all the content !
Happy to see your new video really cool storage merch will definitely be looking forward to the finish of this thanks guys unfortunately rainy day down here in Florida
Trevor's the man! Always mixin gas and slappin ass!
Ive been rebuilding minarelli engines since i was 16.. 38 now. Always use C3 bearings they are actually rated until 16k rpm. C4 gives to much play allready. Factory uses c3 to. Never knew why c4 became a hype, but ive used c3 on race engine builds like forever
Always use steel cage ones. SKF 6204 C3 is the best
I have the same problem, I keep forgetting to unscrew the brake cable😹
I remember the side stand on my buddy's malaguti foggy was a pain in the ass, it limits how far you can lean over on left turns a lot.
We took it of because it was waiting for a accident.
good to know
glad you liked the stickers. if anyone wants any i can get some out to ya. i packed that with the 3d print piece i thought it would make you laugh!
ROCK ON!!! Split Cases and 130CC FOREVER...!!!!!
Lol I always forget the damn brake cable too bro.
everytime lol
its so weird seeing Americans talk about mopeds, i would love to talk with you guys about moped it whould be so fun,
your 70cc jog will smash Chuck's 72cc, cherreh video(Chuck I know you read comments haha)
Much love from Holland
Haha hier ook
@@Yamaha_driver2024 gangghh :D
“There’s no candy…” actually candy in there. 🍭 🍬 😂
those polini bearing look like they have plastic bearing cages, and as far as i know you're not supposed to put bearings with plastic cages in the freezer. Because it can make the plastic brittle and can cause them to break. But it might depend on the particular bearings that you have.
I just got into mopeds, and I bought myself a f12 that was abandoned for some time. Im working on it but it’s been slow.
buddy i was in bed falling asleep watching as i do everynight and i jumped out of bed laughing it make me laugh that much i had to put a quick comment i think 101%of people that do engine build for moped
6:46 wow! Is it all your scooters? Awesome
wow bro how cool is that rear light from honda elite jdm wow and what setup did you choose bro i am new and crank from malossi and lower polini i would like to know celinder haha 🤣😅 grz mopboyzbelguim
Love the vids🔥
thank you!
Is that the same engine as the aerox? Because it looks exactly like mig aerox engine. Minarelli LC is the engine name
this is a minarelli but its not LC , its air cooled
cool stickers :O
@mopboyz i have malaguti 100 cc but it has electronic speed limit on 100 kmh, what do i have to make it go faster than that can you show me because there is no video for that on youtube and you probably know
Nice build bro
greetings from the netherlands
i have an yamaha aerox with a malossi mhr 7t cilinder etc haha
Hey Trevor, I'm working on a 1990 Honda SB50 right now, You have a source on a JDM bubble tail light? I know you had one at one point, so I figured I'd ask.
they’re like impossible to get now . running around $400 , best bet to find one is just watching one to pop
up on the honda group pages one facebook
@@MOPBOYZ thanks!
dont hit bearings, you will destroy them
today i my speedo broke some how it shows bull shit. do u have any tips or should i buy a new one?
it most likely broke internal of the cable, better off buying new cable
@@MOPBOYZ do you know what diameter crank does a stock Minarelli Horizontal engine have?
MALAGUCCI!
Is there a way to contact you ?I just have a question I know u can answer .
how do you take out the motor? what steps do you take
just gotta unbolt shock and motor mount bros
How shit! That was close bro, as soon as you removed shock 👀 I was yelling like I cld help 🤦🏻♂️.
Which one of the prebug's is your go to?
Hey Trevor my moped has a bad fuel economy, the fuel finishes pretty fast is that normal or is there an issue maybe?
Definitely an issue. Scooters are pretty good on fuel. Unless they're heavily tuned and modified. The float in the carb could be stuck open. Could also be a leak from the tank or the petcock if you have one.
@@JDMz well mine is stock but I’ll definitely try to fix the problem thanks for helping
I wish I had random parts like that box because my bike need lighter rollers and and stronger contra and I’m broke Trevor hook a brother up I’ve bin watching for two years
SKF means svensk kullagerfabrik or in english swedish ballbearingfactory.
🔥🔥🙏
3:42 🤣
SKF= svenska kullager fabriken, means Swedish ballbearing factory and its very Good quality Bearings
yessir, i know that the brand is . just didnt know what engine its for is what i meant hahaha
@@MOPBOYZ okey :) thnx for The content
I knew it I knew exactly what was wrong same thing happened to me
👍👍👍👍
I just bought a moped for $20 without plastics got no clue what brand it is tho😭
That side stand is horrible I have it on mine and have never been able to get it to sit just right
The damn brake cable every time 🤦♂️lol
every damn time lol
Not a SSS member? . .. dang
Moin moin🇩🇪✌🏻
tut schon bischen weh beim zukucken teilweise
I’ll be back to watch the video but scooter swap shop is calling you out to become a member!! You’re not a member come on man lol
Super von Mario scrofani fellbach germany Deutschland Super ti ❤❤❤❤😢😢😢🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉😢😢😢😢❤❤❤❤❤
If you need another side stand for a F15/F12 I have a Brand new one that I never touched I can send you £15 + p&p 👍 also I have a new front panel for the F15 & a Handel bar pannel for F12/F15 new
Are you in the uk? Does the handle bar panel have cut outs for 2 reservoirs? I’m after this panel for my phantom f12 100cc
Yesssir rarri malagucci never misses 🤌🏼
why are you with the malaguti who is original all those crazy things ? you have a unique scooter in new condition
and then you're going to screw it up like that. They default why then?
malaguti f12 has never fitted that, the hood always had to be demolished.
cylinder you should have ordered original from malaguti f12 itself and the original exhaust from f12
now you turn an original thing back into an encrypted scooter.
in the Netherlands you would give yourself a laser.
bijnons is original holy
we even build these scooters in the Netherlands to original
have stickers come over from Italy
all original parts let's come from italy
and you're going to screw him up.
yes, its a scooter...... its for fun. I plan on doing lots of wheelies and maybe jump it because i paid for it.