Nice video and that Mojave looking sick, love the color. I just got the Mamba X 8s with the 1650 kv motor too, but my motor came bad from factory. Did a bench test no load on it and got to 150 degrees with in 30 seconds.
Yeah that’s a bit hot. Keep in mind that from what I know they need a bit of a load on them to keep temps. Sounds odd and I may be totally wrong but that’s what I’ve seen. Just about every brushless motor I’ve ever ran has got way too hot to touch when held without load.
My 1717 motor didn't like 8s on the Mojave. The rotor internally fell apart after like 5 minutes on grass. It was working done with stock tires and 6s. 40mph on grass on 6s. It only got 42 mph on grass with 2.8 MT tires. And the motor blew 😭
This was an interesting video for me. I have a Fireteam that I'm leaving stock now but eventually I will most likely change the motor and esc and am trying to gather all the info now on what would work best. I plan on staying at 6s so my results would differ quite a bit from yours but still good food for thought. Trying to do this on a budget isn't easy.
Great job on this truck brother. I just picked up a Mojave myself. Seems that Arrma is releasing a bunch of new models and a 1/10 scale 6s Mojave EXB roller. Can’t wait to see that one.😃
@@gonzodetroitify They leaked it on the Horizon Hobbies UK website and then removed it but some people snapped screenshots. There is new colors for the Infraction and a few other new releases.
I'm coping your set up for a MOJAVE Extreme. With all the extra power for extra top speed what pinion gear would you recommend? Guys were getting 60 mph with a stock 6S system and pinion 20T. Wondering if I could go with a 25T and hit 65 or 70.
Love this video!! I actually have the hobbywing max 6 and 1650kv combo in my Mojave. I just bought this same mamba 8s combo with 1650 sensor motor to gain a little more smoothness and responsiveness. How did you mount your esc? You really give your trucks a good bashing and the electronics stay in place. And what size pinion are you running on your 1650 motor?
Lol. Those tires tho on 8s...but im guessing the bennys of beed locks.. have the exb..with max6/spectrum 1250kv. Havnt done 8s yet. On 6s it's a monster.
@@ExocagedRC Thank you! It seems like people tend to forget to mention or show their battery setups and I think it is important to know what fits and works in a particular vehicle. Thanks for all your work!
What pinion did you use? I have that esc motor combo and a power hobby 760mg I plan on putting in a Mojave exc. just curios I am new to the ex hobby and don’t want to fry my prized baby lol 😂!
I put sprayed bearings oil in my q903 brushless truggy and it seems like it messed up the rear diff because most of the power is going to the front wheels
Toby leblanc thanks for the feedback I haven’t even opened up the car yet I just got a 1/10 brushless redcat volcano but I would love to get my little 1/16 truggy up and running again
@@ExocagedRC couldnt you have just changed the motor to a 1650 and kept the Spektrum esc and accomplished the same results? Either with a Hobbywing or a Castle 1650 motor? Just wondering what you think because I just installed the very same Spektrum combo in my Mojove last weekend, but I havent run it on 8s yet.
@@allenallen7569 yep you sure can, my reason for the castle setup is the sensored operation. At some point I will put a sensored setup in the UDR, eventually, they aren't cheap.
Nice video. I once had a traxxas 8s esc out of my xmaxx and a 1650kv rocket motor in mine and got 51mph out of it on 8s on tarmac, it liked to wheelie alot!
What would be the advantage of that motor vs stock if im using stock esc ? Does it run cooler im only running 6s also would it yield better run times im running a SMC 8000 6s and getting 16 minute runs and im not really bashing that hard just on off throttle kinda sucks
I got 61 mph with 19t pinion stock spur. Vant batteries 6s. Stock motor and ecs. Where did you get those rims and tires?? Stock mojave tires tread go so fast
I’ve already ran the Hobbywing 1650kv in there. Look up Big Block UDR. Great combo in there but in much the same as you see it here, it’s slower due to the lower KV. Runs really good though.
Yeah 2050kv stock 1650kv castle. Speed loss will happen but torque is way up and IMO durability it up with the 1650. All over done for gearing right now is put the 20t on it. I plan to try a smaller spur of some kind on it to bring the speeds up a little. I was hoping for a bit more speed on 8s in all honesty.
I just bought mine I'm loving this thing!!
Nice video and that Mojave looking sick, love the color. I just got the Mamba X 8s with the 1650 kv motor too, but my motor came bad from factory. Did a bench test no load on it and got to 150 degrees with in 30 seconds.
Yeah that’s a bit hot. Keep in mind that from what I know they need a bit of a load on them to keep temps. Sounds odd and I may be totally wrong but that’s what I’ve seen. Just about every brushless motor I’ve ever ran has got way too hot to touch when held without load.
My 1717 motor didn't like 8s on the Mojave. The rotor internally fell apart after like 5 minutes on grass. It was working done with stock tires and 6s. 40mph on grass on 6s. It only got 42 mph on grass with 2.8 MT tires. And the motor blew 😭
Just picked up
The EXB and doing their same conversion I even it the raw 500 servo lol thanks
For the vids man I stay up late watching them all
This was an interesting video for me. I have a Fireteam that I'm leaving stock now but eventually I will most likely change the motor and esc and am trying to gather all the info now on what would work best. I plan on staying at 6s so my results would differ quite a bit from yours but still good food for thought. Trying to do this on a budget isn't easy.
The limitless is pushed to 100 mph with no problem with the same setup. Put the limitless spool and gear it up .
Great job on this truck brother. I just picked up a Mojave myself. Seems that Arrma is releasing a bunch of new models and a 1/10 scale 6s Mojave EXB roller. Can’t wait to see that one.😃
What else did u find out 😉
@@gonzodetroitify They leaked it on the Horizon Hobbies UK website and then removed it but some people snapped screenshots. There is new colors for the Infraction and a few other new releases.
@@KaizerTest ohhh how naughty, now where to find those leaked shots 🤔
It seems like you reinvented the Mojave! Hopefully the tires and wheels are in a link below, nice job !
I'm coping your set up for a MOJAVE Extreme. With all the extra power for extra top speed what pinion gear would you recommend? Guys were getting 60 mph with a stock 6S system and pinion 20T. Wondering if I could go with a 25T and hit 65 or 70.
Love this video!! I actually have the hobbywing max 6 and 1650kv combo in my Mojave. I just bought this same mamba 8s combo with 1650 sensor motor to gain a little more smoothness and responsiveness. How did you mount your esc? You really give your trucks a good bashing and the electronics stay in place. And what size pinion are you running on your 1650 motor?
I'm use 3m VHB 2 sided tape on this, and I'm using the 20t pinion
Lol. Those tires tho on 8s...but im guessing the bennys of beed locks.. have the exb..with max6/spectrum 1250kv. Havnt done 8s yet. On 6s it's a monster.
I think This is perfect for this truck. Doesn't look too over powered, is that even a thing? Lol. Awesome 👍👍👊
LoL well it’s got a LOT of torque.
Which battery (or batteries) are you using for 8s here? Might as well mention the 6s setup too please, thanks for the video.
I use a 4500mah SMC pack as they are low profile and just barely fit. As for 6S I use a 6500mah Power Hobby battery
@@ExocagedRC Thank you! It seems like people tend to forget to mention or show their battery setups and I think it is important to know what fits and works in a particular vehicle. Thanks for all your work!
I think I saw this thing in a hobby store called hobby town
Very cool
What pinion did you use? I have that esc motor combo and a power hobby 760mg I plan on putting in a Mojave exc. just curios I am new to the ex hobby and don’t want to fry my prized baby lol 😂!
Buen video,que trany lleva?
Awesome,,, 💯👍👍
Nice! The extra weight of 8s just isn’t worth the loss in jumping/track performance....8-12s is just for bragging rights😎
lol I agree, I'm going to work some more with gearing so its a solid 50mph on 6s and call it done.
I put sprayed bearings oil in my q903 brushless truggy and it seems like it messed up the rear diff because most of the power is going to the front wheels
i had that issue on my x maxx 8s but turns out i ended up forgetting to put in a bearing on the rear diff pinion when i replaced the rear bulkhead.
Toby leblanc thanks for the feedback I haven’t even opened up the car yet I just got a 1/10 brushless redcat volcano but I would love to get my little 1/16 truggy up and running again
It seemed to run a little better with the Spektrum 8s combo you had in it before.
The spektrum stuff ran well for sure. My issue was I needed decent speed on 6S and the 1650 gets that. Still slower than a stock one.
@@ExocagedRC couldnt you have just changed the motor to a 1650 and kept the Spektrum esc and accomplished the same results? Either with a Hobbywing or a Castle 1650 motor? Just wondering what you think because I just installed the very same Spektrum combo in my Mojove last weekend, but I havent run it on 8s yet.
@@allenallen7569 yep you sure can, my reason for the castle setup is the sensored operation. At some point I will put a sensored setup in the UDR, eventually, they aren't cheap.
oh and you will need 8s with the 1250 kv Kraton motor unless you find a way to change the spur gear out for something a bit smaller
@@ExocagedRC oh okay I see. I thought the Spektrum combo i bought was expensive enough..lol
Nice video. I once had a traxxas 8s esc out of my xmaxx and a 1650kv rocket motor in mine and got 51mph out of it on 8s on tarmac, it liked to wheelie alot!
Terry Navin i want to get a rocket motor for my mojave and use the stock esc because it worked out for vas but i am not sure if it will work🤔
@@mojaverc1585 the stock esc is to weak for the rocket 1650kv,
Terry Navin what I thought, it cut out once on vas so yeah
@@mojaverc1585 it might work at the start, but long term it will kill the esc
Terry Navin yeah I might just get a max 6 combo when I have the money
Just wanted to clarify, the 1717- 1650kv castle motor fits the stock motor mount ? I had thought it would be too big.
Yes
Yep goes right in. The biggest issue I had was finding a fan setup that would fit. Otherwise it’s a straight bolt in.
What would be the advantage of that motor vs stock if im using stock esc ? Does it run cooler im only running 6s also would it yield better run times im running a SMC 8000 6s and getting 16 minute runs and im not really bashing that hard just on off throttle kinda sucks
I got 61 mph with 19t pinion stock spur. Vant batteries 6s. Stock motor and ecs. Where did you get those rims and tires?? Stock mojave tires tread go so fast
Those are Vitavon wheels and proline hyrax tires. There are links in the description for them and other stuff on the truck.
how is a stock xmaxx faster than this thing with a castle combo? i dont get it.
Put this combo in the udr 😵
I’ve already ran the Hobbywing 1650kv in there. Look up Big Block UDR. Great combo in there but in much the same as you see it here, it’s slower due to the lower KV. Runs really good though.
Exocaged RC yeah I’ve seen it but I thought the sensored combo would be cool in there
I tried running 8s on my Mojave with the same set up and I blew my motor after like 5 minutes on grass 😭
I think it needs some stronger sway bars!!!
it doesn't have any on it lol so yeah it could use a some for sure
That’s fast
Will that heatsink fan setup fit on the hobbywing 1650kv motor?
First!! Always wanted a mojave when they came out!👍
If you get one you won’t regret it!! Love this thing even in box stock form!
The mojave looks funny without the front valance
Yeah it didn’t last very long. LoL.
Exocaged RC neither did mine haha
👍🚗👍
The issue i see are your tires. You are losing a lot of power/speed from the ballooning and the truck twisting one way at the 40mph mark.
How did u mount the esc on it does it have a special esc mount
Should I make my Mojave 8s I want to know any problems if I do this
8s can break more stuff faster.
@@ExocagedRClike tires and diffs right?
What pinion are u running in this setup?
I got a gen 1 tylion and want a sct can it be changed in to one.
no idea on that
Will this servo is perfect for the xmaxx?
All that powa & only 49mph come on now my MOJO runs the stock system
& on 6S 20t pinion & dose 55mph all day long.
Yeah 2050kv stock 1650kv castle. Speed loss will happen but torque is way up and IMO durability it up with the 1650. All over done for gearing right now is put the 20t on it. I plan to try a smaller spur of some kind on it to bring the speeds up a little. I was hoping for a bit more speed on 8s in all honesty.
Make the mojave tp powered 8s
I’ve got a TP 2200 kv but it’s only good for a quick run or two, they get hot fast but have INSANE power.
Going ask where you got body, I want pic those fans up
Links are in the description to get all that.
it was faster on stock combo 6s
yeah 2050kv vs 1650kv it needs more gearing and a better speed area without high grass
could I buy the stock green body from ya? haha
I'm going to bash with it
Must be sucking reefs all I ever see you use doubt your paying full price on every servo
Not so. I recently got some power hobbies stuff. Their 760mg and their 770 winch. Both run really good. I do like reefs servos though.