Just a tip❗️ as I did this two days ago an used this as a reference. But when I did it there was no need to remove throttle body or thermostat housing. Unless you wanted to change thermostat at the same time. Once removing air intake and upper radiator hose side ONLY then releasing tension on the belt you can get ur hands in there an remove engine temp sensor. I did not need to remove both upper radiator hoses or throttle body. There was plenty of room. Just a tip great video. This is for those who only need to get straight to the sensor.
Thanks for the vid. It will definitely help me if my sensor fails on my 09 Genesis 4.6L. I just replaced the mechatronic solenoids in the ZF6HP26 transmission due to code P0746 this week. A lot of great vids on RUclips regarding the transmission but almost are for BMW.
I gotta change my coolant temp sensor on my Genesis this week. Great vid. Thanks for the help! Do you know if that sensor going bad would cause the coolant fan not to cycle on on off at the right times?
This car had a fan issue too. I found out that there is a control module on the driver side behind headlight. The Connections on the module had shorted out and cause the cooling fan not to work.
Good morning I am watching your video but you never said did that fix the problem once you replace the temperature sensor please respond ASAP. Thank you.
Just a tip❗️ as I did this two days ago an used this as a reference. But when I did it there was no need to remove throttle body or thermostat housing. Unless you wanted to change thermostat at the same time. Once removing air intake and upper radiator hose side ONLY then releasing tension on the belt you can get ur hands in there an remove engine temp sensor. I did not need to remove both upper radiator hoses or throttle body. There was plenty of room. Just a tip great video. This is for those who only need to get straight to the sensor.
I'm do mine on my Equus, thank you for the video
Thanks for the vid. It will definitely help me if my sensor fails on my 09 Genesis 4.6L. I just replaced the mechatronic solenoids in the ZF6HP26 transmission due to code P0746 this week. A lot of great vids on RUclips regarding the transmission but almost are for BMW.
Great video And walk through looked at over 20 vidds Best 1 yet .sensor and thermostat 👍🏿
Thanks for the video, I gotta replace mine too after I burned it up
Awesome man. I could not find that. Not graphs or anything online. Props to you
I gotta change my coolant temp sensor on my Genesis this week. Great vid. Thanks for the help! Do you know if that sensor going bad would cause the coolant fan not to cycle on on off at the right times?
This car had a fan issue too. I found out that there is a control module on the driver side behind headlight. The Connections on the module had shorted out and cause the cooling fan not to work.
Good morning I am watching your video but you never said did that fix the problem once you replace the temperature sensor please respond ASAP. Thank you.
Yes that did fix the problem. After putting car on scanner and research m, I already knew that would fix the issue.
would you happen to know where the oil temp sensor is???
What is the number on the sesor are they different? as far as I know they are