I wanna do this to my 97 extended cab. id love to see the bracket for the seats. Blueprint wise, placement of the oem mounts and where the new ones mount on the bracket.
Some really cool stuff here. I like what you did with the fronts and console. Thanks for the ideas and information My newest truck is a 96 f350 7.3 crew cab dually. Perfect all around…except the interior makes your old one look brand new. I’d even settle for the interior my 06 has.
Dude, I love your videos. I’ve been subscribed for a long time, back in the “stab in cabin” days. I have a 68 fb mustang that I have swapped an 07 Shelby gt500 drive line in. I’d love to have you come sort out that harness. I know you’d kill it. And clean! Great work, Man!
I have the 11 to 16 vinyl seats in my truck. Matches perfect to the Grey interior. I want to do the full console one day because I love those consoles. Yours looks great other than the gap in the dash. I'll get one one day and find a way to match it to the dash seamlessly. All in all though, great video. Learned a great deal and got some great ideas!
I’m looking to do something similar in my 03 f350 regular cab dually that has a bench seat with the manual adjustable slide to move it forward and back. I’m looking to put a black heat and cooling rear seat from a 17-22 platinum into my truck. But I’m planning on trying to swap the platinum rear seats onto my 03 bench seat sliding frame. I’m thinking of bolting the platinum seats to the 03 seats or make some plates to bolt them together.
Very nice install. I know some others have asked, but could you point us to the source of the wiring harness? Cables and fuse blocks, etc. I've searched but I'm having trouble finding something like that. Apologies if its posted already and I just missed it.
I just picked up a 92 f250 7.3 idi out of South Carolina and I’m making my list on a complete overhaul on interior. Would this work like it did for yours? Also this video is hands down Awsome on the information you gave us going step by step.
Nice to meet a IDI brother. I bought a 94 7.3 idi Turbo about 2 years ago and have been working on it off and on. Now it looks brand with all chrome bright work replaced new bed and had it painted the original Jewel Green metallic. The truck looks brand new. I will say this. Though the truck needed a lot of work it had just had a new trans installed and the engine ran strong as heck. It set for a long time while all the bodywork was being done, but once complete I encountered a problem. I could take off from a start and 500 feet down the road it would cough and stall. If I waited 2-3 minutes it would start again. I couldn't for the life of me figure out why this was happening. I had never worked on a diesel before. I took it to several places and they didn't want to touch it. So I had to learn myself. I found an air intrusion in the fuel filter top where the heater heats the fule. That problem was solved with a 3 cent oring. That helped but didn't solve the problem. I ran clear tubing on the fuel lines to make sure there was no more air in the lines. I now checked all the fuel lines back to the 2 tanks and couldn't see a problem. I then decided to remove the bed to access the fuel feeds, in the tanks and discovered that the filters on the fuel pickups had completely dissolved and I saw little black chips of plastic in both tanks that were getting sucked into the fuel feeds., and causing the total problem. www.amazon.com/4C4Z-9365-BA-Fuel-Strainer-Powerstroke-E5TZ-9J306-BA/dp/B083Q4H759 If you ever have a problem this could be it. They send you two long strainers with it I have no idea what they are used for. They list these for powerstroke but they are the same for the IDI 7.3 as well. The problem was solved for under 20.00 These engines can last for 4-500K if you take care of them. Good luck to you Bro
Great install by the way. I was just thinking of putting 03-06 seats in my 98 Expedition because they are allegedly a direct bolt in, but now I'm thinking I may do something like you did.
I have 97 crew cab I intend on doing this to my truck my question for you is on mine I believe to put it in 4wd low you have to press in on the shifter how did you by pass that?
Hey man I’m not gonna lie I really need help right now, I’m puttin 2012 king ranch seats in my 1999, I got the driver side all hooked up and working from ur video, I figured the passenger side was the same thing to cut all the plugs and look at ur diagram to hook up the wire and get power from switch to the motors but the colors aren’t the same on the passenger side I need help 😊
Muy buen trabajo amigo tengo una f350 1997 y le puse de los mismos asientos platinum pero no supe cómo iban las corrientes para Aser fusionar me podrías ayudar con ese dato graisias
Great job Zach. I have an 03 and put 15 KR seats in. I cut down the hareness and have the power working but did not tackle the heat/cool portion. What are you charging to do the harness for driver and passenger?
i need the 11-16 Seat Harnesses and i build them here on my Mock up seats, make sure they work then its $520 Shipped back, if you need i can supply donor seat harness if youre already using your seats and dont want to be with out movable seats for an extra $150 Refundable Core when you swap mine in and send yours back
@@zacharymcfarlin1270 I have my seat set in position and never move them so i can pull them and send to you. whats your lead time if i sent them next week? Im ready to do this.
is the sound deadener you use or the combos of more then one that you use do it top secret or something? I'm running out of time and will be ready to reinstall the dash soon and liked how much burnt toast quieted down and iv asked like 5 times now even in the newest videos or if you talked about it in a video witch one was it? you started in toast then skipped it lol. im deleteing the last post so theres not 2. thanks for sharing
Always learn something new from your videos! Thanks Zach for all you do making your videos and I look forward to your next video!
This looks really clean. Its well thought out and you did a nice job of making everything fit and work together.
That is so cool! My dad had a 97 350 single cab in green, was awesome. One day id love to do this in memory of him. Fun build
This is a awesome walk through video of superduty seats and center console, you did a wicked job and thanks for this
Nice job!! I like to do my f250 7.3 96 model. You are a wizard to the electric stuff!! Nice and clean .
I wanna do this to my 97 extended cab. id love to see the bracket for the seats. Blueprint wise, placement of the oem mounts and where the new ones mount on the bracket.
Some really cool stuff here. I like what you did with the fronts and console. Thanks for the ideas and information
My newest truck is a 96 f350 7.3 crew cab dually. Perfect all around…except the interior makes your old one look brand new. I’d even settle for the interior my 06 has.
The attention to detail is what I love about your work
What led bulbs as in brand for interior
Your OBS videos are my favorite. Can't wait to see what you do to her next. Very entertaining!!
Thank you very much for this video. I did this with my '97 crew cab. I used the '16 rear seat also.
Really looks good... Great job man!!
Awesome!! Dixie is looking Fancy!👍😉💪
Dude, I love your videos. I’ve been subscribed for a long time, back in the “stab in cabin” days. I have a 68 fb mustang that I have swapped an 07 Shelby gt500 drive line in. I’d love to have you come sort out that harness. I know you’d kill it. And clean! Great work, Man!
I have the 11 to 16 vinyl seats in my truck. Matches perfect to the Grey interior. I want to do the full console one day because I love those consoles. Yours looks great other than the gap in the dash. I'll get one one day and find a way to match it to the dash seamlessly. All in all though, great video. Learned a great deal and got some great ideas!
Wow those seats look great in there nice job
Another awesome job!
Inspiration bro, looks awesome.
New subscriber love what you doing man!!!
Nice job on the seat 💺
that is sweet!!!!
my family hauler is a 14 ford but my work truck is a 99 cummins, I think a pecan brown platinum interior would look sick in it!!!!
Dixie is a sexy ride!!
Long Live Axle!!
Looking sharp.
She’s a beauty! ❤🙏
Nice job. Very nice
Great install brother ! Super clean I would love to do this to my 99 crew cab 7.3
Since you have a '99, it *should* be a direct bolt-in
Well done!
I really learn a lot from your channel about OBS
Great video man thanks!!!
You killed it
Super nice.
❤ The upgrade
Those seats and console would look great in my 01 F350 dually if you get tired of them …I know I’m tired of the old man tan
Hey bud you still in Vegas or in Fla. Still looking for grey 13-16 crew seats for my 99. Thanks man. That truck has come a long way. Great work.
Highly recommend the black vinyl/rubber floor
Yo this dude is so smart
better get a gps locator on that truck. Looks awesome
What an upgrade for the old girl
Love the videos, where did you get the heated/cooled rocker switches?
I’m looking to do something similar in my 03 f350 regular cab dually that has a bench seat with the manual adjustable slide to move it forward and back. I’m looking to put a black heat and cooling rear seat from a 17-22 platinum into my truck. But I’m planning on trying to swap the platinum rear seats onto my 03 bench seat sliding frame. I’m thinking of bolting the platinum seats to the 03 seats or make some plates to bolt them together.
Man make me wanna so do this on a 10th gen f150 it would be so cool
What is needed to make heating and cooling functional? Thanks for any help love the videos !
I need that wiring video lol
Great video, you have an amazing talent!
I want to do this to my 1997 E-350 7.3 extended van.
Think it's possible?
Thanks, keep the videos coming!
Not sure i don’t have any experience with Vans but I don’t see why not if you can get them mounted
Very nice install. I know some others have asked, but could you point us to the source of the wiring harness? Cables and fuse blocks, etc. I've searched but I'm having trouble finding something like that. Apologies if its posted already and I just missed it.
Really wanna do this to my 96 bronco i currently have some cheap Amazon racing seats and they just destroy my back on long drives
Awesome I just subscribed to your channel ,I have a1997 OBS. Where can I get 11-16 Ford seat and what should i expect to pay ? Thanks
you should sell this as a service for people! i know i would be interested!
Badass
I would like to see a 16 dash in there. I am in the planing gathering stage with mine. Try to figure out dash and door panels
hurts my heart you left the back seat i’ve been looking for a full pecan interior for MONTHS 😢😢😢😂
I just picked up a 92 f250 7.3 idi out of South Carolina and I’m making my list on a complete overhaul on interior. Would this work like it did for yours? Also this video is hands down Awsome on the information you gave us going step by step.
Nice to meet a IDI brother. I bought a 94 7.3 idi Turbo about 2 years ago and have been working on it off and on. Now it looks brand with all chrome bright work replaced new bed and had it painted the original Jewel Green metallic. The truck looks brand new. I will say this. Though the truck needed a lot of work it had just had a new trans installed and the engine ran strong as heck. It set for a long time while all the bodywork was being done, but once complete I encountered a problem. I could take off from a start and 500 feet down the road it would cough and stall.
If I waited 2-3 minutes it would start again. I couldn't for the life of me figure out why this was happening. I had never worked on a diesel before. I took it to several places and they didn't want to touch it. So I had to learn myself. I found an air intrusion in the fuel filter top where the heater heats the fule. That problem was solved with a 3 cent oring. That helped but didn't solve the problem. I ran clear tubing on the fuel lines to make sure there was no more air in the lines.
I now checked all the fuel lines back to the 2 tanks and couldn't see a problem. I then decided to remove the bed to access the fuel feeds, in the tanks and discovered that the filters on the fuel pickups had completely dissolved and I saw little black chips of plastic in both tanks that were getting sucked into the fuel feeds., and causing the total problem. www.amazon.com/4C4Z-9365-BA-Fuel-Strainer-Powerstroke-E5TZ-9J306-BA/dp/B083Q4H759
If you ever have a problem this could be it. They send you two long strainers with it I have no idea what they are used for. They list these for powerstroke but they are the same for the IDI 7.3 as well. The problem was solved for under 20.00 These engines can last for 4-500K if you take care of them. Good luck to you Bro
You're awesome lol
Sweet
Great install by the way. I was just thinking of putting 03-06 seats in my 98 Expedition because they are allegedly a direct bolt in, but now I'm thinking I may do something like you did.
I like...niceeeeee
CPaddict makes rails to install the Newer Seats with
Currently doing this in my truck , what kind seat belts did you convert to to fit the Super duty seats ?
Hey Zach did you have to build the seat harness or did you leave them stock and built a harness to hook up to them?
I like the state brother
Mr Zach, what's the newest seat year can I install on a 96 f350.?.I'll be doing the same brackets as you?
Sweet😂
I have the same exact truck but white I’m doing this
I have 97 crew cab I intend on doing this to my truck my question for you is on mine I believe to put it in 4wd low you have to press in on the shifter how did you by pass that?
Where did you get your switches and Fuse distribution block? Could you include a link to all the parts you used please (:
Hey man I’m not gonna lie I really need help right now, I’m puttin 2012 king ranch seats in my 1999, I got the driver side all hooked up and working from ur video, I figured the passenger side was the same thing to cut all the plugs and look at ur diagram to hook up the wire and get power from switch to the motors but the colors aren’t the same on the passenger side I need help 😊
I need your obs seats 😩
What battery cables do you have on this truck? or did you make them?
What size fuses you using for the seats?
They look good as hell 💪🏼
30amp each seat
Do you still have your old seats? I'm looking for a set like the ones you pulled out. Let me know. thanks...
Where ya been dawg?!
Muy buen trabajo amigo tengo una f350 1997 y le puse de los mismos asientos platinum pero no supe cómo iban las corrientes para Aser fusionar me podrías ayudar con ese dato graisias
subbed because you do stuff just as good as it needs to be without bitchin about everything.
rock on 🤘🏽
Dude! Whered u get that overhead center console??
Any way you could build all the wires and seat brackets so i could do the install myself?
Have ever tried to install 2015 center console in a 2009 f150?
Do you work on chevys also ?or just fords
Where did u get the switches for the seats and inverter
Great job Zach. I have an 03 and put 15 KR seats in. I cut down the hareness and have the power working but did not tackle the heat/cool portion. What are you charging to do the harness for driver and passenger?
i need the 11-16 Seat Harnesses and i build them here on my Mock up seats, make sure they work then its $520 Shipped back, if you need i can supply donor seat harness if youre already using your seats and dont want to be with out movable seats for an extra $150 Refundable Core when you swap mine in and send yours back
@@zacharymcfarlin1270 I have my seat set in position and never move them so i can pull them and send to you. whats your lead time if i sent them next week? Im ready to do this.
What’s the brand on your fuse box (power distribution system)?
Where did you get the cables for the fuse block?
Assuming there is no issue with the airbags being in there and that your harness doesn't power them in any way?
What is your plan for the stock seats?
Where can I get that exact power distribution setup
Where are you located. I need my 94 Bronco interior done.
You still have the old set?
Does it work for the extended cab?
Where do you get new seats from ?
Where can I find those seat Rocker switches?
How did you mount your Hydra Tuner controller? Do you have any videos? Or an Instagram? Thanks...
Do you still have the original seats?
Where can I get some of that thick wire?
is the sound deadener you use or the combos of more then one that you use do it top secret or something? I'm running out of time and will be ready to reinstall the dash soon and liked how much burnt toast quieted down and iv asked like 5 times now even in the newest videos or if you talked about it in a video witch one was it? you started in toast then skipped it lol. im deleteing the last post so theres not 2. thanks for sharing
The First Layer is FatMat Sound deadner i get off amazon and then i use this stick pad on top of the deadner-----> www.ebay.com/itm/263311645936
Also what the big screen on you dashboard
What are you doing about the seatbelts?
How much do you charge for a custom gauge cluster
Did you already sell your old seat?
I have a 04 6.o do you have any upgrade videos for a 6.0
Obs solutions makes seat brackets and all kinds of stuff for obs trucks. If anyone is interested
I have a truck similar to this and would like an interior swap. Do you know anyone in GA that does this?
How do I get ahold of you about purchasing?
✌🏽😎