The EASIEST BMW E90 Rear Window Regulator DIY!
HTML-код
- Опубликовано: 27 авг 2024
- In this video, I’ll share The EASIEST BMW E90 Rear Window Regulator DIY!
Check Out My BMW N54 335i Setup ⬇️ :
JB4: burgertuning.c...
Burger Tuning Dual Cone Intakes (DCI):
burgertuning.c...
JB4 500HP Package!: burgertuning.c...
Burger Tuning Pedal Tuner: burgertuning.c...
Burger Tuning Wheel Spacers: burgertuning.c...
Items used in this video:
Window Regulator:
www.fcpeuro.co...
Dewalt Impact Driver Drill:
amzn.to/35orwzC
Torx Bit Set:
amzn.to/3nvKafo
CLICK HERE To Shop On My BMW Fanatic Amazon Website! Thanks for the support!👉🏻www.amazon.com...
My Camera Setup! (USA & UK links) ⬇️:
Sony ZV-1 Camera:
(USA)amzn.to/3gsPmzs
(UK)amzn.to/3HDE6w0
GoPro Hero 8 Black:
(USA)amzn.to/3h4lESg
(UK)amzn.to/3IMngez
iPhone 12 Pro:
(USA): amzn.to/3jM8Gdj
(UK): amzn.to/3HMBQ5X
Don't forget to SUBSCRIBE here ⬇️👉🏻 / @bmwfanatic
LET'S CONNECT!! ⬇️
Instagram: / bmwfanatic_youtube
BMW Fanatic Facebook Page: m.facebook.com...
Thank you for watching! As always, please SUBSCRIBE to keep up on all of the new content, click the “Bell” logo to ensure you receive notifications, like and comment!
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Thank you for your support as it helps me grow and provide better content each and every video!
Music:
Instrumental Produced by Chuki
/ chukimusic
It was a clear black night, a clear white moon..... ah wait, wrong kind of Regulators.
16 in the clip and one in the hole
I've never did a silent laugh so hard/loud until reading this damn comment
So to that, I say.... Thank you🤙🏾
😂😂😂😂😂
Ha ha yess
Mount up!
Two notes, could not get the window up to release the green clip, a had to cut the cable to release it, then raise it. 2nd, after replacing, doing the 10-second “reprogramming”, it would not stay up, would immediately drive back down after touching the top. Finally figured out door had to be closed for it to work. Hope that helps!
George ...Thank you so much for the note. This was my situation with window down thanks for the string cutting tip and also regarding window closed position fo programming
Dude thanks for saving me a lot od time, I thought that my electric motor went bad.
George, I am about to do this myself when the part comes in tomorrow. To which cable are you referring?
I already installed the new regulator and it works but when i roll up the window and hit the top it automatically go down to the middle. How can i fix that? Its normal? Please help
@@joelmitchellperezferrer8681did you find out the problem..?? If so how did you fix it…??
You make it look easy and it really was that easy. Thank you E90 brother
Foam liner is easier to remove if you simply cut it at the glue line, with a utility knife.
Thank you so much for the video. my rear passenger window regulator broke last summer which was a fairly simple fix but couldn't figure out the programing part. Thanks again.
Perfect 10 out of 10 video Thank you for posting this! 14:02
Got my regulator from Amazon today, which cost me $35 with tax. Took me less than 1 hr of labor and wa-freakin-la. Probably saved around $300 from a mechanic and now the wife is super happy now!
Just fixed mine, don't put of off fellas it is truly just as easy as it looks. It took me half a year to do it. Wish I had fixed it sooner
This tutorial worked perfectly! Thanks for going through every step from beginning to end. I can’t believe how easy it was after I got the right parts. Thank you so much! I would have been lost without this video.
And the programming part was something I didn’t know being new to BMW. THANKS AGAIN!!
Mine just broke yesterday. Thanks for the vid!
Always happy to help!
excellent video. Worked a treat, took about an hour and I was done. Thanks heaps for the tips.
Thanks. Just completed replacing the right side today on my wife's car. The green clip takes a bit of effort but if you get the glass in the right place and hold your tongue just right, it unsnaps. I think removing the plug from the motor was more difficult. Second time will be quite easy. . . .hope that never happens! Thanks again and thanks to FCP Euro for getting the part here in in just three-days with free shipping. I finished up today after work and still had some sunlight left over.
THANK YOU. I HAVE THE SAME ISSUE AND YOU JUST SAVED ME HUNDREDS OF DOLLARS
Great tutorial. Clear, well lit, and explained.
Mine same window just went out recently. Thank you for the video
Great tutorial! Just finished replacing the right rear. Thanks!
Fantastic. I'm ready to do this now. Thanks for the confidence. lol
Now why would they not use torx throughout? Foam block held in by phillips screws...
Nice DIY!!! Well recorded and edited.
Is there a way to get the window up without having the part? I ordered one but I don’t want a trash bag in my window for the next few days
what did you do to put it up?
With a stick 🪵 a couple if necessary or tape just like on the video or both
Thanks for the help! Up and running!
Good video! I have the same problems but mine right rear window. Hope I can fix it by watching your video. Thanks 🙏
So helpful
Question,
door handle is not working after replacing the E90/06/330i windows regulator, could you edetail how to fix the door handle issue, I had to replace the regulator on two passenger windows, both the doors are not opening, handles are struck. :(., perhaps this is just overlooked or I need help woth it.
Thank you.
I'm experiencing exactly the same problem. It is really a tedious task to get these working again with those bowdencables which operate the door handles
very good video well explained help me tremendously thanks
Mine just broke lastweek thanks for video
Great video! Thank you!
Ok.. it was three bolts holding the regulator...i have a fourth bolt at the very top of the regulator that i can reach
Mine just broke today for the second time 😡 perfect timing for the vid lmao. Not just that something else is bad also because my rear passenger wheel is super low and it’s kinda cambered in and is making a weird noise and to top it off my alignment is out due to me not seeing a pothole yesterday and ramming into it 🥴. It really hasn’t been a good weekend for my car sadly 😔
Great DIY, thanks.
Great job!
Great video, I did my e90 rear window this morning without the assistance of this video which I only got a moment ago! I had to replace the two short cables! It's working fine again without having to program it?
great video man hope I can make it this far one day
Great DIY. Followed your instructions to the letter and fixed mine in about an hour. Only mistake I made was all the doors have to be closed to reprogram-duh Thanks a ton
Great video, thanks
Thank you for the video, I had replaced window regulator, couple of problems, 1) Door Handle got struck and it would not open the door. 2) After completely bringing down the window it stopped going down, I thought it start to work with mild operation, apparently one rainy day it went down and regulator would not help to push the window back up. Wondering if the regulator gone toast within few days or any idea ? Arg... this after market parts or what else could be going on ? Thank you.
Hey bro! Could you add a complete tool and part list please?
The tab to the right of the hole. Does it go behind or in front of the glass? My glass comes down right on top of it and I'm afraid to snap it by bending it the wrong way.
👍 thanks for sharing!
also my new regulator 10mm bolts did not fit..i mean no new screws came to mount motor..
Great video....Thanks
great vid! My window dropped completely already so i cant tape it up like you. any tips for when i replace mine on account of the window being fully down? thanks!
Same situation. What did you do to work around this?
@@josiahdayton8240 when you take the interior panel off you can just pull the window up shut and tape it so it holds while you work on the other stuff. cheers!
@@erenix3909 great, thanks for the help!
Just finished mine. My window dropped as well. Once the regulator is unbolted it is easier to unclip from the green clip. Then you can pull it up and tape it in place
@@mattgatof4174 awesome, glad it worked out for you. Was that your first Regulator replacement while owning the car?
Hi, Can you confirm the type of bits that you used? Specifically for the window regulator and the 3 screws to get the interior door panel off.....I also liked that last tool that you used to put back the interior door panel to screw back in. Thought it was nice and long to grab on to the door. Please let me know. Thanks!!!
Interior panel screws are T-20 and the screws that hold the motor to the regulator are T-25 Torx. Phillips screws for the foam panel.
@@MrDorsal99 thanks! I got it after a couple of bits lol :-)
I hate videos that just show you the thing and say ok now take this off and then don’t show you how.
hello do u know what the purpose of that foam black piece with two screws in it at bottom RIGHT?
Where do you get the blue tool???
Do you have to reset the airbag error after this?
Would this be the same for an E93?
Hi, Is this the same or similar process for the E87 models?
Dude, you completely glossed over the part about separating the window from the rail clip! Show me! That's why I'm on YT!
i had some trouble aswell, on the grren thing there is a notch you press in to " realease " the window ( if you are in my position where the window was stuck down reach in with a flat head and press it then lift the window up and tape it to the door, then just do as the video shows :D
In my e90..window is just going down not up.i have to pull up by hands and it comes down lil bit after sometimes. So what would be the issue?
Have you done the relearn procedure? I did a different video on that. Does it go up when doing that?
No its not moving now…window stucked at bottom…just making weird crackling noise when press button
@@harpindersingh7197
Dziękuje
So common to break 😔.
This isn’t a repair it’s replacement
👌
Thanks you help me alot 🫡