Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
Tire is dry rot and the thing is, no one is ever going to apply that to a old tire… just buy a new one unless your not going farther than 1 mile around a farm…
Those new unworn studs will probably just rip right out,given how much they stick out. If your studded tires are that worn, pull the studs and use them for a summer before you swap em for new ones. Replacing the studs is just a waste.
That was my thought haha. There gonna be shooting out first time the car hits the road. I've pulled then out before too but never thought to out them in.
Exactly why waste your time on trying to restud old tires. It makes much more sense to just use the old ones as regular tires and get a new set of studded tires. I get it cost money to replace them but you have to replace your old summer tires at some point so it makes more sense to stud the next set and use the older ones as a new studded tire. Wow some people will do anything for views on the net!
For everyone who doesn’t understand, in areas where there is colder weather with ice snow and sleet those metal pieces are called tired studs which help you drive in the snow, so please stop hating on the guy because all he is showing is a really good way to replace the old studs to be safe in the colder months, no he didn’t ruin the tire, no he didn’t waist anyones time except for the people who don’t get ice on the road
I hope you realize the there a different sized studs and the tire sticker have the stud size to use for when the tires are new. Putting a new studs in used tires will most likely result in flat tires because the stud will eventually get pushed through the inside of the tire.
I watch a lot of these DIY videos through 🥺 I have yet to find one that is useful, productive, and has any rational sense to it 💯💩 please stop wasting our time 🚧
@@bigimskiweisenheimer8325 They can but not to badly . Better to have a little bit of torn up road than crashes . In countries like Ukraine the roads can be clear and very quickly have several inches of snow , then it melts and you still keep the studded tyres on because you know more is coming . They are not to bad on concrete
Thats gotta be one of the dumbest things I've seen in a long time! (26yrs in the tire and wheel industry & shop owner.) Those studs were way too long/big for that tire and the size they were pinned/molded for. The first mile or 2, those studs will come right out especially when someone is hard on the throttle. Smh! Besides, that tire I'd half worn out and not to mention that those studs will cause flats as they will wear through the protective layer exposing the steel belts to water and debris eventually going flat or worse like a separation/blowout!
@@MightyCoffeeMaker not so much explode… more just break easily and demagnetize with impacts. They’re magnetic fields are so strong the magnet itself is under fairly significant stress after it is made. If it is hit it can crack along its stress lines. Impacts can still hurt magnetic fields tho too. TLDR: don’t hit magnets with hammers
It's really not that difficult to plug a tire especially when tools come in a kit. You should rarely have to plug tires to even make that tool worth it. Also, paperclips will never hold up and you soldered them when you have a welder? Your not gonna convince me that magnet is really that effective especially considering how you struggled to remove the old ones with pliers
Huh? Why come yew put medal in rubbuh? No, seriously. What the hell is going on? Edit- OOOOOOOOHH ok thanks for telling me. I was thinking it was an attempt at plugging a hole. Cool. We only have/had tire chains here. Well actually I think they did away with them. They were tearing up the streets n all that. But I think large inner city trucks can still use them. I'll have to look it up.
yes here in the states we would use snow chains . metal studs are for areas where you have a few inches or more of ice and also where the roads are not paved . studs for traction are for use in very harsh environments .
@@Nsj-kl5wz I'm not understanding what your saying I was just explaining why people put studs in tires . here in the states as far as I know we don't use them there might be a few that do I guess but I wasn't putting anyone down that do use wheel studs .
@@user-zg2vz7pq5j они по высоте протектора подбираются, 7\8\9мм. Эти явно не по размеру, загнёт и сотрёт их, если не выпадут. А нейлоновое кольцо плющит и заполняет разбитое отверстие
Там пластиковая втулка - у ремонтных шипов Теком. А так да, конечно - установка в б/у отверстия первичных шипов не только запрещена, но и бессмыссленна. тем более что и приспособа для гаражных работ по ремошиповке тоже продаётся где угодно.
I just love how he ONLY has the $20 mig welder from harbor freight. You know they make different welders, along with different processes of welding, one of which would be PERFECTLY SUITABLE for what you’re doing, but you went with MIG, instead of TIG
In the amount of time it took just to watch this, I ran and got a tire plug kit - plugged my flat and popped the other 3 so I could plug them. Plugged my neighbors cars and went to the school garage and plugged all the school bus tires.
Cmon people. He fixed a tire with holes in it by pulling the stuff out and putting something in the holes. And used a sparky thing and some shiny bits. I too speak mechanic....lmao
You’re not supposed to remove worn studs from worn studded tires the studs were down with the tread of the tire you can only replace them when they’re brand-new if one maybe pulls out but you’re not supposed to replace new studs in old studded tires
Just go buy a tyre plug kit 🤷♂️ it’s cheaper than me buying a welder, a drill, a set of drill bits, two pair of pliers, a pair of side cutters, a bolt, two nuts, a soldering iron, roll of solder, a centre punch and a packet of paper clips 😱
Wow! This is genius… I can’t believe we have never made tire plug tools before.. oh wait we have. You can get them for the store for $3 or waste time welding and soldering for some RUclips views…
as a southern boy, also raised on a farm, I feel like if a man had the necessary tools to do this, then he isn't going to need this thing to help him with a tire, thus far making it pointless bc some city boy that actually "needs" this isn't going to know how or even have the tools or access to the tools to build it
Does the thumbs down tab do anything? Also, Don't recommend this channel. Lastly, again (because I was stupid enough to watch another one of these) the time and money spent on doing this. Just order a tire repair kit online. 6-7 bucks maybe for the deluxe version. And yes I understand about it's about making stuff. Not everything should be DIY. This is one of those things.
This fixed nothing. It replaced some studs for snow driving. Hardly something someone at home should be doing if inexperienced. I hope literally no one attempts this then drives on a public road.
Gotta love the youtube comment section calling anything and everything dumb and completely disregarding the fact that some people like making stuff for shits and giggles
You know they use an air chuck to put those in right you're just wasting more power by using a screwdriver in a roughly takes like 15 minutes to do all four tires with the air chuck
You know its gonna be some fucking stupid shit when it starts off by turning a nut into Swiss cheese
HAHAHAHAHAHAHAHAHAHA
Hahahahahahahah 😆
@@iRxyanDestinygtaandmoreL Знакомьтесь с клавиатурой Gboard! Здесь будет сохраняться текст, который вы копируете.🇺🇦❤️
👍
🤣🤣 too good. I only watch these videos to read the comments like yours hahahah keep it up legend
The biggest waste of my minute this year. Good lord.
To dekh hi kyu rha tha chutiye
🤣
@@tilly2249 c
@@sammanolathavong4676 d
Tire is dry rot and the thing is, no one is ever going to apply that to a old tire… just buy a new one unless your not going farther than 1 mile around a farm…
Wtf have I just watched
Something your eyes will never un see.
@@MrLipp24 gonna use this line alot
Installing tire studs
I was thinking the same thing
I was about to.comment the same
Those new unworn studs will probably just rip right out,given how much they stick out.
If your studded tires are that worn, pull the studs and use them for a summer before you swap em for new ones. Replacing the studs is just a waste.
That was my thought haha. There gonna be shooting out first time the car hits the road. I've pulled then out before too but never thought to out them in.
Rubber looks like it has dry rot too...
Exactly why waste your time on trying to restud old tires. It makes much more sense to just use the old ones as regular tires and get a new set of studded tires. I get it cost money to replace them but you have to replace your old summer tires at some point so it makes more sense to stud the next set and use the older ones as a new studded tire. Wow some people will do anything for views on the net!
I could see the bad rubber around the old studs. It's clear that this fix won't last.
Зимняя резина летом может сыграть злую шутку. Нельзя так делать.
Most important tool. The sharpie for sure, it really served a special purpose..
Зашёл почитать русскоязычные коментарии, а их нет))
Как думаешь сколько тут ГигаМегаКванта Ляхов будет?😁
@@NoviceNotes 1000000столько где-то примерно 🧐 😁.
вот комментарий на русском
Нас мало, но мы в тельняшках)))
Патамушта
For everyone who doesn’t understand, in areas where there is colder weather with ice snow and sleet those metal pieces are called tired studs which help you drive in the snow, so please stop hating on the guy because all he is showing is a really good way to replace the old studs to be safe in the colder months, no he didn’t ruin the tire, no he didn’t waist anyones time except for the people who don’t get ice on the road
Сначала припаять оловом, а потом сварка гений 😐
Я вот тоже про это подумал 🤣🤣🤣
I hope you realize the there a different sized studs and the tire sticker have the stud size to use for when the tires are new. Putting a new studs in used tires will most likely result in flat tires because the stud will eventually get pushed through the inside of the tire.
😂 250 из 250 полуляхов
Тут полуляхметр сгорит без включения, просто от того что его поднесли.
... интересно а если измерить мозг автора в полуляхах???
@@tovsultanov1713 вселенная схлопнится)
Че вам не нравится?? Работает же все
Знаете почему он в перчатках? Что б его даже по отпечаткам пальцев не нашли.
Что такое полуляхи??????????
Обьясеите наконец! Сколько прошу и тишина
I watch a lot of these DIY videos through 🥺 I have yet to find one that is useful, productive, and has any rational sense to it 💯💩 please stop wasting our time 🚧
L. C internet ce 😎 feed zat w
Tradu te rog frumos în Limba
Română
Da să poate și aici, ar fi mai valabil, Dragi Traducători! Să merită.
Try wranglerstar
Big Clive also busts why diy/5 min hacks are dangerous and what you should do instead.
Dude the time and effort when you can just buy new ones
Or pay ten dollars to get it patched. Or get it patched for free at most big brand tire shops
@@autodidacticartisan those are tire studs which are not replaceable and will probably fly out all over the road
and where to put the old ones? Should Africans throw off again, as do old phones?
Just plug the damn thing with a standard kit.
@@jameskelly3745 it's not a hole. It's a stud. He's restudding them.
Just think this person is an “engineer” and probably convinced a company he is one
I'd say he's had no luck with professional companies and so has resorted to seeking approval from people way less qualified than him (on youtube) lol
u call that a diy fix u butchered the tire and the tools
Lmao 😂
Yes, everything can be done the hard way.🌵
Такую резину на свалку выкидывать надо, а он шипует её 🤣
Внатуре
Вы слишком много кушаете...
@@user-iw9iv4lp3h разьёбёшься на такой резине, потом поймёшь
What a stud.
They're illegal where Im from
They're legal in most places where they're needed.
someone explain why they’re illegal, i’m stupid
@@p0purlerm0bs60 they tear up the asphalt and concrete roads.
@@bigimskiweisenheimer8325 They can but not to badly . Better to have a little bit of torn up road than crashes . In countries like Ukraine the roads can be clear and very quickly have several inches of snow , then it melts and you still keep the studded tyres on because you know more is coming . They are not to bad on concrete
@@UserUser-ww2nj I agree but our local government doesn't. Nothing I can do about it.
Immediately
“Don’t recommend this channel”
Thats gotta be one of the dumbest things I've seen in a long time! (26yrs in the tire and wheel industry & shop owner.) Those studs were way too long/big for that tire and the size they were pinned/molded for. The first mile or 2, those studs will come right out especially when someone is hard on the throttle. Smh! Besides, that tire I'd half worn out and not to mention that those studs will cause flats as they will wear through the protective layer exposing the steel belts to water and debris eventually going flat or worse like a separation/blowout!
Let's forget about the part where he hit a neodymium magnet with a hammer...
Fn massive ouch to watch…
Why ? The magnet can explode ?
@@MightyCoffeeMaker not so much explode… more just break easily and demagnetize with impacts. They’re magnetic fields are so strong the magnet itself is under fairly significant stress after it is made. If it is hit it can crack along its stress lines. Impacts can still hurt magnetic fields tho too.
TLDR: don’t hit magnets with hammers
Lol look at the first welds
The soldering is what has me concerned
He writes
Welded another nut to it that wasn't there when he put it in
Yeah the paper clip wire used would literally collapse when it contacted the tire
Video evidence right above these comments mate!
did this man really just try to use electrical solder to attach a paperclip to a coated steel nut.....
I'm afraid so 😂 he's deluded
Won't be long before they start to rust again..
They're replacing the worn out studs on snow tires not because they're rusted.
you know it's high quality when paper clips are involved
Don't you love when a diy tip involves a tig welder, clamps, paperclips, and a soldering iron.
No i don't think it's safe to restud I call that fix may pop tires
Just buy a new set studded tires your putting drivers at risk it's snow tires for safety not thrifty
My time is valuable. So all these "homemade" tools that take forever and require buying a bunch of tools to make, just really make no sense.
Agree..just stupid crap!!!
Dude busting out windows from his bootleg studs flinging everywhere
😂😂
Poor fella, it's like watching craft time in a special needs facility
😂
Can't decide if it is more complicated or stupid, maybe stupidly complicated.
5$ says it won't even reach half a mile before its totally flat.
It's a studded tire for driving in winter conditions
YOU GOT TO BE FREAKING KIDDING ME?! I DON'T EVEN KNOW WHERE TO BEGIN OR WHAT TO SAY.. JUST WOW!!
It's really not that difficult to plug a tire especially when tools come in a kit. You should rarely have to plug tires to even make that tool worth it. Also, paperclips will never hold up and you soldered them when you have a welder? Your not gonna convince me that magnet is really that effective especially considering how you struggled to remove the old ones with pliers
Welding that nut after soldering the wire would result in your solder melting and running out on the floor.
Nice cold solders
Huh? Why come yew put medal in rubbuh?
No, seriously. What the hell is going on?
Edit- OOOOOOOOHH ok thanks for telling me. I was thinking it was an attempt at plugging a hole. Cool. We only have/had tire chains here. Well actually I think they did away with them. They were tearing up the streets n all that. But I think large inner city trucks can still use them. I'll have to look it up.
They're called studs, and they exist in extreme winter tires to increase grip on ice.
He made a tool to install said studs.
this is very common in Russia and other places . when dealing with alot of snow and ice you need metal studs in the tires for traction .
yes here in the states we would use snow chains . metal studs are for areas where you have a few inches or more of ice and also where the roads are not paved . studs for traction are for use in very harsh environments .
@@Nsj-kl5wz I'm not understanding what your saying I was just explaining why people put studs in tires . here in the states as far as I know we don't use them there might be a few that do I guess but I wasn't putting anyone down that do use wheel studs .
@@Nsj-kl5wz and what does a I phone have to do with explaining what and why tire studs are used ?
Brilliant diy hack. Saves the cost of a specialist, but the tire was perished, so too old to be re-used on a public road.
I am more impressed with the automatic center punch that actually make a deep dent in the nut.
That’s because it’s garbage, like everything else on this channel.
How damn strong are this paper clips???
Yeah I’m no sure
Лучше шипы с нейлоновым кольцом, а эти так же быстро вывернет
Вот и я хотел спросить, как долго такой секонд хенд продержится? 🤔👍🏻
@@user-zg2vz7pq5j они по высоте протектора подбираются, 7\8\9мм. Эти явно не по размеру, загнёт и сотрёт их, если не выпадут. А нейлоновое кольцо плющит и заполняет разбитое отверстие
@@blind5225 на таком хламе эти шипы во внутрь провалятся.
Там пластиковая втулка - у ремонтных шипов Теком. А так да, конечно - установка в б/у отверстия первичных шипов не только запрещена, но и бессмыссленна.
тем более что и приспособа для гаражных работ по ремошиповке тоже продаётся где угодно.
I just love how he ONLY has the $20 mig welder from harbor freight.
You know they make different welders, along with different processes of welding, one of which would be PERFECTLY SUITABLE for what you’re doing, but you went with MIG, instead of TIG
If this much effort is needed to fix a puncture/to remove a patch, you might as well plug the hole from the inside of the tire.
In the amount of time it took just to watch this, I ran and got a tire plug kit - plugged my flat and popped the other 3 so I could plug them. Plugged my neighbors cars and went to the school garage and plugged all the school bus tires.
Never seen anyone reinvent the wheel but people try everyday. All you need are the pliers you started with.
Доктор, доктор!!!!!!! У нас новый пациент!!!!
А чё так можно было?🙄🙄🙄Показал отцу который в СТОшке работал 15 лет и узнал ещё кучу новых "русских" слов 🤣
Okay, it's sooo niche but hey it's clever but not thaaaat practical in all cases. I'm sure there is designated tools for this
I mean you kind of said it yourself, just make the tool instead of buying the niche one, which being niche its probably also expensive.
*fix the brain* 🙅🏻
Один хрен вылетят. В старой резине дупло "как у моей бывшей"
Так он их вытащил практически руками.
When you spend 10x time designing and creating a tool than the time it saves... it's not the destination it is the journey
no se entiende la finnalidad; que pusiste en el agujero, del que extrajiste el clavo?
Those are studs for winter tires, they're meant to increase grip on ice.
Son spikes, puntas de acero que se les ponen a las llantas en invierno para que no derrapen en el hielo.
Some cats have great ideas!
This ain't one of them.
I have no idea what tf did I just watch and I am not even drunk or high...
It's useful. Negative comments are wrong.
$100 bucks of work to do a $5 buck repair!
Brilliant! 😳
Just take it to Nacho's Tire Shop, $10 bucks n
you're good to go ..
I have learned - I stopped watching when the paper clips came out, and came here to say so.
Круто молодец , руки из правильного места ростут)))
Cmon people. He fixed a tire with holes in it by pulling the stuff out and putting something in the holes. And used a sparky thing and some shiny bits. I too speak mechanic....lmao
The hole in the tire is too close to the wall to be repaired. Just buy a new tire if you want a safe ride.
Funnily enough, this isn't a terrible idea, as far as the idea to replace the studs on a snow tire.
When you're building terrible tools to do something as specific as restudding tires, Darwin is coming
250 полуляхов из 250
Судя по ровными рукам, 250 из 250 полуляхов!
What is track play?
Funk FPV is gonna enjoy this one...
ayyy was looking for a comment like this
Мне кажется у всех самодельщиков какой-то фетиш на гайки
Advice to all of you: Windshields Insurance!
yesterday I watched welding for two hours and it was nicer than a minute of this idiocy
Studded tires are illegal in alot of states due to concrete roads
You’re not supposed to remove worn studs from worn studded tires the studs were down with the tread of the tire you can only replace them when they’re brand-new if one maybe pulls out but you’re not supposed to replace new studs in old studded tires
He's not fixing a tire he is re studding winter tires. This guy just made a home made tool to stud tires.
Just go buy a tyre plug kit 🤷♂️ it’s cheaper than me buying a welder, a drill, a set of drill bits, two pair of pliers, a pair of side cutters, a bolt, two nuts, a soldering iron, roll of solder, a centre punch and a packet of paper clips 😱
Wow! This is genius… I can’t believe we have never made tire plug tools before.. oh wait we have. You can get them for the store for $3 or waste time welding and soldering for some RUclips views…
as a southern boy, also raised on a farm, I feel like if a man had the necessary tools to do this, then he isn't going to need this thing to help him with a tire, thus far making it pointless bc some city boy that actually "needs" this isn't going to know how or even have the tools or access to the tools to build it
I'm certainly sure that I have no idea what I just watched.
Does the thumbs down tab do anything?
Also, Don't recommend this channel.
Lastly, again (because I was stupid enough to watch another one of these) the time and money spent on doing this. Just order a tire repair kit online. 6-7 bucks maybe for the deluxe version. And yes I understand about it's about making stuff. Not everything should be DIY. This is one of those things.
Those studs are going to fly off on the highway, crack someone’s windshield and possibly cause a 52 car pile up.
That's the idea - this is a scene from the new John Wick movie
Studs are glued in, if you just stick them in like that you will loose 90% in the first 10km...
Very impressive how you managed to fuck up all 6 solder joints, very cool
This fixed nothing. It replaced some studs for snow driving. Hardly something someone at home should be doing if inexperienced. I hope literally no one attempts this then drives on a public road.
This guy is replacing studs on a studded snow tire, not patching.
Gotta love the youtube comment section calling anything and everything dumb and completely disregarding the fact that some people like making stuff for shits and giggles
I don't understand why everyone is so negative it's honestly shocking. I think this was very creative and highly inventive. Keep it up bro 🤠
Люблю изделия из стали "пластелин"))
Срочно отправьте Доктору
So glad to see stainless steel soldering...
Huh? Drives screws into a tire?
I was waiting for you to redeem yourself, but you just kept digging.
🎶 if I only had a brain🎶
That’s not a tire fix. That’s installing tire spikes
Anyone with a brain / common sense knows NOT to use paper clips and the reason why.
if u want the solder to stick to the stainless u have to us muriatic acid
Just stop this is so messed up
"Fixed a tire"? He made a stud tool
I worked at les schwab a few years back and they won't warranty tires that are restudded for a reason
How long would that take to restud a set of four tires? All day I bet.
One, that's not how you solder, two you get better metal than paper clips, three that tire is so far gone new studs ain't gonna make a difference.
it is,a good idea but take a new tire put the studs in it
You know they use an air chuck to put those in right you're just wasting more power by using a screwdriver in a roughly takes like 15 minutes to do all four tires with the air chuck
Name song?
This is the new way of pranking your viewers isn’t it?