This video shows how to fix the vertical barline of a Viewplus curve monitor. model MH-24CH. Tips and Tricks. please like, share, and subscribe. thanks.
How to fix when the screen is blurry and cloudy I'm using VIEWPLUS | ML-24CH | 165HZ MONITOR | 23.6" currved gaming monitor? is there any best setting for the issue?
My monitor has this flickering at the bottom side of the screen. It starts to appear after a few minutes of using. Do i need to buy a new one or can i still fix it?
sir in lg s70a monitor i have logo normal and set the menu but when i try to connect with someone source via hdmi it says it doesnt exist signal i noticed the basic ic of the mainboard is very very hot in your opinion from where is coming this hot bad contacts between ic and pcb via balls and needs reballing or there is someone shunt ? thanks on advance
I have the same problem, exept i dont know how to fix it and theres no obviously bad chips or anything, tried the ribbon cables and display cables but nothing had changed
So it's possible that those resistors have short circuited and that's why they were quiet but they unsoldered to see if the cables from the screen were unsoldered from the pcb but they stopped resisting
Hi, I have a samsung curved monitor model C27HG7x and this problem occurs when I turn it on, but it heats up and the lines disappear. what would be the solution?
The LCD panel has a two-gate signal on the left side and right sides of the LCD screen. the left and the right gate signal is connected in parallel. If one of the sides has shorted gates, the screen will flicker or distort the image. If you cut the shorted side, the image will be normalized. Because the connection is parallel, The LCD still has the other side work. But the side has the shorted will be darker or like lower resolution.
hello san po location niyo? and may naririnig ako na nag iiloco,may viewplus 27 165hz din po ako and kakasira lang. black screen lang siya and parang working naman siya. di ko lang sure baka backlight or anything. kasi pag sinaksak ko hdmi/dp may audio naman siya and nadedetect pa rin ng pc ko as monitor. so if po baka po dalhin ko sa inyo pag malapit lang kayo sa location ko thanks!
@@tevzTVTevatronics I have a 60 pins (2 30 pins connectors) display that I wanna put in a tv with a 80 pins (2 40 pins connectors) display, have yoy already done a video about an adaptation like this one?
@@tevzTVTevatronics If I cut even one line on right or left image is pernamently distorted with lines. I try cutting and soldering lines one by one on both sides.
@@JenilynFajardo Malamng sira na yong LCD panel. Baka may crack sa loob ng panel hindi lang halata. hindi na magawan ng paraan tulad sa video content ko. Bili nalang ng bago.
There is a shorted CLK line on the side where thous resistor is been removed. It can solve the problem by disconnecting the bad clk lines. Its still work because the other side has healthy clk lines.
@@tevzTVTevatronics how about po yung screen flickering lang, hindi kana maka pag trabaho kasi panay ang flick. I check it already sa cable niya ganun padin. Same po ba ng gagawin pag binuksan ko sakin?
Mind-blowing sir ,you are true engineer in sense
My HP x24C just died, same vertical lines. It uses the same panel too!! I removed the resistors and its working again! many thanks :D
Good great best job thanks for sharing your master 👍🏾👍🏾👍🏾👍🏾👍🏾❤️🙏
Galing master
Thanku sir
i like the confidence. "I will fix it". ang iba kasi "I will try to fix it"
wow good job
EXELENTE
newbie is watching master
thanks sir tev
How to fix when the screen is blurry and cloudy I'm using VIEWPLUS | ML-24CH | 165HZ MONITOR | 23.6" currved gaming monitor? is there any best setting for the issue?
Good Job at work repair TV!
Thanks!
@@tevzTVTevatronics you're welcome.
Merci beaucoup de traduire en françai 😅bon courage tankyou maroc
I will try it in my specterpro
My monitor has this flickering at the bottom side of the screen. It starts to appear after a few minutes of using. Do i need to buy a new one or can i still fix it?
sir in lg s70a monitor i have logo normal and set the menu but when i try to connect with someone source via hdmi it says it doesnt exist signal i noticed the basic ic of the mainboard is very very hot
in your opinion from where is coming this hot bad contacts between ic and pcb via balls and needs reballing or there is someone shunt ?
thanks on advance
I have the same problem, exept i dont know how to fix it and theres no obviously bad chips or anything, tried the ribbon cables and display cables but nothing had changed
Good boy
ang galing. pwede pala yun. curious ako kung ano ang long term effect pag wala ang mga parts na yun? kasi hindi naman ilalagay yan kung walang purpose
Pag na tanggal mga yun , maging lower quality sa kablia, hindi lng masyado mahalta.;
Please explain how and why this fixes it?
So it's possible that those resistors have short circuited and that's why they were quiet but they unsoldered to see if the cables from the screen were unsoldered from the pcb but they stopped resisting
very good
Thanks
@@tevzTVTevatronics boss ganyan din issue ng monitor ko same brand and specs ng.monitor sabe sakn panel na daw problem
only take out the resistor can fix the problem?
sir meron ako 27inch viewplus led monitor after 10 minutes nag start siyang mag white display. ganyan method din po kaya pwede gawin.
Hi, I have a samsung curved monitor model C27HG7x and this problem occurs when I turn it on, but it heats up and the lines disappear. what would be the solution?
the panel I guess.
🎉🎉🎉🎉🎉❤❤
Meron akong ViewPlus ML 24 na may horizontal flicker din. Same procedure din ba kapag horizontal?
hello sir can i message u i do have some monitors that has different problem will to pay for repairs po
Hello sir tinangal ninyo po ba yong mga yan?
I have a dell 22" with the same problem, can this method solve the problem?
Im not sure
san po shop nyo? para madalaw namin
hey great video, i have a similar problem with my lg 34gl750-b curved ultragear 34 can you help me? Thanks in advance
you can do as shows in the video
Please explain how and why this fixes it.
The LCD panel has a two-gate signal on the left side and right sides of the LCD screen. the left and the right gate signal is connected in parallel. If one of the sides has shorted gates, the screen will flicker or distort the image. If you cut the shorted side, the image will be normalized. Because the connection is parallel, The LCD still has the other side work. But the side has the shorted will be darker or like lower resolution.
Sir binalik nyo pa po b mga capacitor??or Hindi na po??
nag gaganyan monitor ko kapag ng gagames na ako ☹️ dko alam kung gpu ba or monitor na
sir may inaayos akong ganitong monitor... inangat ko na ang mga resistor..pero no luck.. may ibang paraan paba mag bypass? salamat po
boss ganyan din sakin pero may display sya pero sa pinakadulo may blerd pano po kaya ayusin
pag nagkaka ganyan na yung mga monitor natin boss, naayos pa naman yan no?
Hindi lahat
How about the 27inch is this the same?
no
@@tevzTVTevatronics can u content the 27inch viewplus 75hz
@@kimgalang1473 will do. stay tune
pwede p pala ayusin ang mga ganyan sir? may ganyan ako HK vision ganyan din problema. un lang baka walang magaling na tech duto samin
hindi lahat pwede magawa. taga saan ka ba sir?
Paano po ayusin may clouding na kasi viewplus monitor ko 19" kalat na sa taas ng screen.
panel issue
sir how about viewpoint 32 inch
Not yet tried
Why not check with resistor is faulty and just change the bad component instead of bypassing
its the panel issue no other componnents.
Sir,ganyan din monitor ko same brand,Ang problem nya is no display. Maaayos pa po bah sir?
depende kung ga ano ka lala sira
Paano sir if my cloudi ng sa side part ng monitor?
wala akong idea pag diko makita yung image.
hello san po location niyo? and may naririnig ako na nag iiloco,may viewplus 27 165hz din po ako and kakasira lang. black screen lang siya and parang working naman siya. di ko lang sure baka backlight or anything. kasi pag sinaksak ko hdmi/dp may audio naman siya and nadedetect pa rin ng pc ko as monitor. so if po baka po dalhin ko sa inyo pag malapit lang kayo sa location ko thanks!
Laoag city ako.
@@tevzTVTevatronics boss nag pm nak dijay page yo thanks!
Sir pano naman ayusin yung 24 mh na hindi curve glitch problem iba kasi yung panel board ng curve. Salamat more power.
Same brand view plus din
malamang ganyang method din, hindi kasi pare-pareho ang symptoms.
what did you bypass?
Ckv lines ang vgh even and odd.
@@tevzTVTevatronics thanks, I'm learning a lot from your videos
@@tevzTVTevatronics I have a 60 pins (2 30 pins connectors) display that I wanna put in a tv with a 80 pins (2 40 pins connectors) display, have yoy already done a video about an adaptation like this one?
@@geovani60624 60 to 40 pins LVDS is not easy to adapt. But there are ready made adaptors that you can buy online.
Is there no other solution?
No at this tme
Bos black screen paano? nagpapakita yung viewplus logo pero black screeen, Capasitor ba or Bypass gayahin koto?
try mo bypass
@@tevzTVTevatronicsWalang umbok yung capacitor. Pwede kaya to.
idol paayos naman kaya ba home service?
Hindi po
Boss sakin hyc 24" ganyan din problem patulong sir salamat
malamang ganyan din ang sira.
Sa akin boss 23 inches viewplus regular pc monitor ganyan din may mga lines. Pareho din kaya ang pag ayos jan sa video mo?
Sir paano po kapag HKC M24G3F naggarbage display po. Sana mapansin. More blessing to you sir.
posible pasata kapareho ng lcd pannel sa nasa video.
saan po kayo located?
laoag city
Good day sir baka po pwede nyo ako macontact nasira din kasi monitor ko
@tevz how about issue like this? ruclips.net/video/PJiN_sMWvUo/видео.html Samsung c32hg70 after warming up is okay.
Cutting CKV line.
@@tevzTVTevatronics If I cut even one line on right or left image is pernamently distorted with lines. I try cutting and soldering lines one by one on both sides.
Paano po nasira yan sir?
Defective panel
saan po location mo kuya
Laoag city
@@tevzTVTevatronics malayo po pala kayo
upload ko po damage ng monitor ko huhu baka may advice po kayo
ito ung link
ruclips.net/video/rVqqU9tKCMk/видео.html
any advice po???
@@tevzTVTevatronics thank you po
@@JenilynFajardo Malamng sira na yong LCD panel. Baka may crack sa loob ng panel hindi lang halata. hindi na magawan ng paraan tulad sa video content ko. Bili nalang ng bago.
How and why remove jumpers and resistors can fix the issue???
There is a shorted CLK line on the side where thous resistor is been removed. It can solve the problem by disconnecting the bad clk lines. Its still work because the other side has healthy clk lines.
@@tevzTVTevatronics how about po yung screen flickering lang, hindi kana maka pag trabaho kasi panay ang flick. I check it already sa cable niya ganun padin. Same po ba ng gagawin pag binuksan ko sakin?
Dude why are you using AI voice? Omg
Cable.imeze.solutian.pleese.32.lcd
Hello