I have a 2017 grizzly 1860 CC it has the removable bow fishing deck. With the deck removed with me and 2 friends all avg sized guys, full tank,and gear I can get 37 MPH with the Mercury 4 stroke 90 horse. Just a little info I have to share for somebody wanting to know numbers. And that’s plenty fast IMO
Hi ! Your video and a few other helped me make my decision on getting one. I ended up getting a 2025 with the 90. I have another boat a Bayliner F16 that has a 60hp Mercury. I wanted to chime in on that difference in power that sort of made me agree with you about the top speed and it was at FIRST made me a little disappointment when I couldn't break 40mph on the lake. I didn't take it out on the water for almost 2 weeks after taking home because I spent those 2 weeks rigging it up to my liking. I'll make a video as well. So, the thing about the power difference after 3 times on the water to break it in was in my opinion your cruising speed. On my bayliner I was always WOT to get 25mph, last time out I took a buddy and his daughter and I couldn't even plane and made pass 10mph. The motor was struggling bad and I was so frustrated that I went out to Cabela's to check out the 1860 after weeks of watching other vids like yours. They had one in the showroom that wasn't listed anywhere and I was like .. " yep .. i want that one" . After doing my 2 hour break in I've come to learn this. My cruising speed is 35mph at 4500 rpm and at 5500-6000 rpm is 39mph but I feel like it still had more to give. My observation is that the motor is possibly sitting too high and will slip at top speed. I'm happy with it's overall performance but I will echo that point about what you said as far as cost vs performance difference. My only point to make about that is the 90 doesn't feel the boat at all. Planning is near instant and before you know it you're doing 30 mph and climbing. That is where that extra power shine veryyyy brightly. Coming from a CC fiberglass boat with 60 and never breaking 28mph even at WOT it is very refreshing. I'm working on a few ideas before I contact the dealer about dropping the engine down lower on the transom but over all I'm super happy with the boat so far.
Nice boat ! I'm going to look at a 2018 tomorrow. You're video was very helpful in giving me alittle better insight into the 1860 and a few things to look at tomorrow. Thanks ! John
I had a 2010 1860 with 55 horse tiller when the flooring got loose because it was riveted I pulled the thin aluminum up and found broken welds on sringers.
I have a 2018 I picked up used the guy before me upgraded the motor to a 90hp and a Bob's jack plate and the shallow water lower unit pickup. $$$. Point blank the boat is AWESOME runs 40 mph w/ 4- blade no matter if I got 2- people an gear or 5 guys an gear jumps up on plane an holds/handles on plane at lower rpms. ALL AROUND great boat hunting 🦆 an fishing fresh salt etc. I did upgrade an installed Hydro turf 4- sheets an had left overs. Much cooler an quieter in the HOT summer heat. Also Bimini top camo shadow grass blades of course 🦆👍an definitely led interior lights under the gunnel. Red. Low profile light bar on bow. Remote switch. Only extra I would think about doing is the rod holder bar across the stern for rod storage or trolling etc. Great video great info. 👍🦆🎣
Ps. With the 90hp. An the jack plate bob's shallow water nose cone pick up an cavitation plate. The boat will JUMP UP on plane in about 12" of wateror less floats in about 6-8" depending on gear fuel etc. But will RUN in 6" or less no prob. It will get you everywhere a mud motor will go👍
We have a couple JBL portable speakers that hook to the Wi Fi on the phone. Not only can you use them on the boat, they go everywhere. No cutting, drilling, wiring.
Put a speaker on each side of console and put the amp under the console. Run Aura Opt7 LED lights under the track systems, upgrade to the 90 horse and get a 4 blade 18 or 19P Stainless prop, seadek the front and back decks, put an ATV tool box bolted to the rear deck as a driver seat and weld up a back brace for it and turn it basically into a leaning post like on any bay boat and then get a lid and back cushion upholstered for it, and then upgrade to a 36V 112lb riptide i-pilot with dakota lithium batteries powering everything on the boat to save weight. Upgrade to a new Lowrance HDS9 in the dash and then another one up front.
I'm looking at the Grizzly 1860 as my next boat. Love how wide it is. BUT. This is what I know about aluminum boats and salt water. If your trailer has carpeted bunks, you WILL have issues with electrolysis. The carpet will hold salt and no amount of running it through a car wash will get it out. And the issue with electrolysis is you can't see it happening, It will set up where the carpeted bunks contact the hull. It'll start out with pin hole leaks. The problem with electrolysis is it will take what should be a lifetime hull and shorten it to 10 to 20 years. The good news is all you need to do is take the carpet off the bunks. Aluminum boats don't need carpet anyway. If you fell you need something between the hull and the bunks, get some Glyde Slicks from Taco Marine.
Looking at an 18x60 open tracker but it has a 40hp merc jet pump. Would that be to under powered for 3 guys duck hunting? Thanks great video, tight lines!
Change the pitch of the prop so your rpms will climb faster. If its a 13 pitch put a 12 on it it will give you qicker rpm under laod and change it out for type of use
Thanks for the review. You answered some of the questions I had. I have a bigger boat (tracker pro guide 175 deep v) and I still would not go out in choppier water than you described. It's not fun and it makes your butt pucker.
If you run your equipment in salt water just spray it down with something like wd40 before you go out and when you get back wash the heck out of it and spray it again with the lubricant and you can make it last for years…
Still holding up really well I actually sold it to my brother in law. Ended up going to a 22ft bay boat. Hope to get a video out soon on it. I do miss the grizzly tho
ty i wanted to get one but i was holding off because i go to the coast every once in awhile and i wanted to make sure the saltwater would be ok . were u just in the bay with it?
Mines in the saltwater 2 or 3 times a year. I just make sure it’s cleaned good when I get back from my trips and the motor flushed out. Never had a problem.
Good video I’m really interested in buying a grizzly 2072 by summer by 2022 and good to see some input. One of things I’m worried about is I am mostly going to be in saltwater and how the trailer holds up is it galvanized? Or aluminum or how is it holding up for you in the salt water? Kelly
It’s not aluminum or galvanized but does have a coating that protects it a little. I’ve not had any issues with the trailer and saltwater. I normally wash the trailer with fresh water every time after it’s used in saltwater and seems to be just fine.
Been looking for anouther center council I like small boats I have no need for a big boat I like that its aluminum I had alotbof nicks in fiberglasd I fisg salt water and love the flats and I think I would havrvto put a spottet deck on mine but that would be it I don't travel far either and my last boat had a merc 90 it was a hell of a motor I think I would likr to go one step bigger with a jack plate like 100 so bigger motor and spotting deck love your boat....is the trailer good reg tires not those small tires I do travel 200 miles to the coast....stero is cool but yeah just a port waterproof speaker easy to ......less shit to mess with the better for me ..........Bad ass boat.
Had the same boat, every weld cracked and popped loose after 9 years. While it was still under warranty once a year it would go in for replacement. It made it a few years with no problems but finally a windy day on the lake cracked two critical weld along the hull and on of the supports pushed its way through the hull causing a massive leak. I barely made it back in time. Your experiences may vary but I will NEVER buy anything motorized from Bass Pro again.
I understand that. I never had anything happen but ended up selling it and buying a bullsbay 2200 bay boat and I don’t regret the decision one bit. Hope to get a video out on it soon
Sir my question to you would be if it will stand up in saltwater? A constant saltwater use. I am here in South florida so I will switch up between fresh and salt. Now the one I am looking at will be 2072 model. Your thought and insights would be appreciated.
I truly believe it would! I would just make sure after every use in the saltwater, you flush the engine with freshwater also wash the trailer. I do all that and pressure wash the inside and you can’t even tell mine is used in saltwater.
@@FURREVEROUTDOORS thank you sir for your response. I am glad to know I can get an honest answer for a person like me who is looking at a cheaper build, expectantly looking at an aluminum boat for saltwater. By the way my brotha you have just gotten another sub to your channel.
I appreciate it brother! They may be the “cheaper boat” but I love mine, put it through some things I probably shouldn’t have lol but it’s held up like tank!
Thanks for the video man been looking at this boat alot and im about to go to Cabelas and order the same boat. What i love the most about this boat is that it is rated for 7 passengers. I like the 60hp because its lighter then the 90. Never been on one is it quiet? Does it handle good if its choppy out? How many passengers have you had on? I love that boat its simple and lolks to be heavy duty.
I have fished 4 on it very comfortable. 7 may get pretty tight lol. Not gonna lie, I love the 60 on it. Me and another guy went a mile or so out in the ocean a few weeks ago and caught several fish. When it gets pretty choppy, this boat will allow some spray to come over the bow but it’s not terrible as long as you trim the motor right and keep the front up. Also the motor is super quiet!
Do you regret not getting the 2072 because I’m between your boat with the 90hp and the 2072 with the 150hp I just don’t think the 2072 is worth the extra $10k
The boat will draft about 8inches of water. with the motor trimmed I can run in a foot or so. We hunt and fish some shallow areas so I try and put it through the test lol
Great video man about to pull the trigger on one. I fish alot of rivers that I'd have to walk the boat through in like 3-8". I'm wondering how shallow do you think she sits with the motor trimmed up?
Around 8-12 inches you can move a little with the motor trimmed. Any shallower I’d push it. But it floats real shallow especially with the pods on the back.
Does great inshore! I run the pamlico sound in North Carolina several times a year and handles rough water well. After every run in saltwater I flush the engine with fresh water as well as wash the boat and trailer to get the salt out. And once a year I take it to the marina to change all fluids and have routine maintenance done.
Looking at the same boat bit older 2008 and it has the 40 merc 4 stroke .Would it be enough power.I do local lakes and rivers and never big nasty water
Yea I think you would be fine. Normally that’s what they come with. That 40hp would run you and couple buddies high twenties to low 30s if I had to guess.
@@FURREVEROUTDOORS I have been calling around to Bass pro and they said none of them ever came with a 40 but they were not working there back in 08 which is the year of this one .Im a bit nervous it wont be enough and id be stuck .
HEY BUD FIRST TIME WATCHING YOUR videos loved it i have a question how far out in salt water do you think this boat will be able to go out would you feel safe 5 miles out or in the inlet with this boat i also live in nc ,, just moved how far would you go out in the ocean ..? thanks for your time
It really depends on the day and how the ocean wants to act. A month ago I had about 2 miles offshore running out of little river inlet. Some small chop but handled it just fine.
Hey man, awesome boat. Do you ever hunt from the boat itself? If so, how do you go about putting a blind on it with the center console? I’m looking at these for a hunting and fishing rig but worried about how the center console would interfere with a duck blind
At one time I use to hunt from the boat and had a scissor blind on it. Worked pretty well and killed several ducks. With the versa track on the boat you have several options on how you wanna make your blind. The console may stick up a little but honestly never had issues as long as it’s brushed in real good.
For the most part they are pretty close. The front and back decks are bigger on the grizzly and the grizzly has a 19 gallon built in tank where his had a removable 6 gallon tank. Handling wise and riding they both do well
@@FURREVEROUTDOORS really appreciate the feedback. I'm looking to buy a 1860 and those two boats seem to be very similar but I haven't been able to really compare them.... maybe you could get a video comparison of the two if yall had time, just a thought
I'm getting ready to order one in a few weeks. Trying to decide if the 90 is worth it. I would like to tow a tube or knee board with my family. Will the 60hp work?
I’ve been considering one of these. My only worry is I live 7000ft above sea level and I’m curious how it would handle in the lakes in my area and I like an aluminum utility boat as a family boat for a multitude of reasons. How would you rate this boat as far as a fishing/hunting boat but also a family excursion boat? I’ve been looking at tons of boats and honestly I ended up more confused that I was before even starting my search.
It’s a great family boat in my opinion! During the summer, myself, my wife and our two boys are always on it riding around, fishing, swimming and just having a great time! That’s what I love about these boats. Can be fishing boats, hunting boats and family boats all in one.
My biggest concern is high altitude lake running. I prefer the look and functionality of a utility boat but I’m wanting to make sure I can take kids tubing but at the same time get to places you can’t normally get to during hunting seasons. I don’t need a race boat so as long as I can get up to 30-40MPH and feel comfortable on the water I’m happy!
I’ve never tried tubing with the boat but I have had this boat way back in creeks and shallow waters. Not sure if altitude will change anything. I wouldn’t think so but not sure.
I have a 2017 grizzly 1860 CC it has the removable bow fishing deck. With the deck removed with me and 2 friends all avg sized guys, full tank,and gear I can get 37 MPH with the Mercury 4 stroke 90 horse. Just a little info I have to share for somebody wanting to know numbers. And that’s plenty fast IMO
Hi ! Your video and a few other helped me make my decision on getting one. I ended up getting a 2025 with the 90. I have another boat a Bayliner F16 that has a 60hp Mercury. I wanted to chime in on that difference in power that sort of made me agree with you about the top speed and it was at FIRST made me a little disappointment when I couldn't break 40mph on the lake. I didn't take it out on the water for almost 2 weeks after taking home because I spent those 2 weeks rigging it up to my liking. I'll make a video as well. So, the thing about the power difference after 3 times on the water to break it in was in my opinion your cruising speed. On my bayliner I was always WOT to get 25mph, last time out I took a buddy and his daughter and I couldn't even plane and made pass 10mph. The motor was struggling bad and I was so frustrated that I went out to Cabela's to check out the 1860 after weeks of watching other vids like yours. They had one in the showroom that wasn't listed anywhere and I was like .. " yep .. i want that one" . After doing my 2 hour break in I've come to learn this. My cruising speed is 35mph at 4500 rpm and at 5500-6000 rpm is 39mph but I feel like it still had more to give. My observation is that the motor is possibly sitting too high and will slip at top speed. I'm happy with it's overall performance but I will echo that point about what you said as far as cost vs performance difference. My only point to make about that is the 90 doesn't feel the boat at all. Planning is near instant and before you know it you're doing 30 mph and climbing. That is where that extra power shine veryyyy brightly. Coming from a CC fiberglass boat with 60 and never breaking 28mph even at WOT it is very refreshing. I'm working on a few ideas before I contact the dealer about dropping the engine down lower on the transom but over all I'm super happy with the boat so far.
Nice boat ! I'm going to look at a 2018 tomorrow. You're video was very helpful in giving me alittle better insight into the 1860 and a few things to look at tomorrow. Thanks ! John
I had a 2010 1860 with 55 horse tiller when the flooring got loose because it was riveted I pulled the thin aluminum up and found broken welds on sringers.
Thanx for sharing. I am interested in this boat. You Rock!
I have a 2018 I picked up used the guy before me upgraded the motor to a 90hp and a Bob's jack plate and the shallow water lower unit pickup. $$$. Point blank the boat is AWESOME runs 40 mph w/ 4- blade no matter if I got 2- people an gear or 5 guys an gear jumps up on plane an holds/handles on plane at lower rpms. ALL AROUND great boat hunting 🦆 an fishing fresh salt etc. I did upgrade an installed Hydro turf 4- sheets an had left overs. Much cooler an quieter in the HOT summer heat. Also Bimini top camo shadow grass blades of course 🦆👍an definitely led interior lights under the gunnel. Red. Low profile light bar on bow. Remote switch. Only extra I would think about doing is the rod holder bar across the stern for rod storage or trolling etc. Great video great info. 👍🦆🎣
I think my next upgrade will be the hydro turf and Bemini top! Glad you like the boat!
Ps. With the 90hp. An the jack plate bob's shallow water nose cone pick up an cavitation plate. The boat will JUMP UP on plane in about 12" of wateror less floats in about 6-8" depending on gear fuel etc. But will RUN in 6" or less no prob. It will get you everywhere a mud motor will go👍
Thanks for the review. Nice boat.
We have a couple JBL portable speakers that hook to the Wi Fi on the phone. Not only can you use them on the boat, they go everywhere. No cutting, drilling, wiring.
Put a speaker on each side of console and put the amp under the console. Run Aura Opt7 LED lights under the track systems, upgrade to the 90 horse and get a 4 blade 18 or 19P Stainless prop, seadek the front and back decks, put an ATV tool box bolted to the rear deck as a driver seat and weld up a back brace for it and turn it basically into a leaning post like on any bay boat and then get a lid and back cushion upholstered for it, and then upgrade to a 36V 112lb riptide i-pilot with dakota lithium batteries powering everything on the boat to save weight. Upgrade to a new Lowrance HDS9 in the dash and then another one up front.
I'm looking at the Grizzly 1860 as my next boat. Love how wide it is. BUT. This is what I know about aluminum boats and salt water. If your trailer has carpeted bunks, you WILL have issues with electrolysis. The carpet will hold salt and no amount of running it through a car wash will get it out.
And the issue with electrolysis is you can't see it happening, It will set up where the carpeted bunks contact the hull. It'll start out with pin hole leaks. The problem with electrolysis is it will take what should be a lifetime hull and shorten it to 10 to 20 years.
The good news is all you need to do is take the carpet off the bunks. Aluminum boats don't need carpet anyway. If you fell you need something between the hull and the bunks, get some Glyde Slicks from Taco Marine.
I bought a used bass boat , had trouble getting it to level out. Bought a prop with a pitch that would make it level out quicker, worked great.
Looking at an 18x60 open tracker but it has a 40hp merc jet pump.
Would that be to under powered for 3 guys duck hunting?
Thanks great video, tight lines!
You would be fine in my opinion. If I was to guess with three guys and gear Mabey mid 20s
Very helpful video, like to see inside measurements but great job!
I’ve been looking to buy one of these , this video helps so much. It’s be cool to see get versa track gopro mount and video you fishing !
I like that idea!!
Radio sounds like a great idea!!
I want something like this I like the idea of a high hp tiller engine so no console taking up space.
Change the pitch of the prop so your rpms will climb faster. If its a 13 pitch put a 12 on it it will give you qicker rpm under laod and change it out for type of use
Good information, have been looking at one and your video was Betty helpful and informative.
Thanks for the review. You answered some of the questions I had. I have a bigger boat (tracker pro guide 175 deep v) and I still would not go out in choppier water than you described. It's not fun and it makes your butt pucker.
You did 😊awesome thanks for the info
I'm looking for the next size up Grizzley (20 ft) because I like to go out and camp on my boat on the lake for 3 to 5 days setting trotline.
🎉🎉. Would like to see you put on two ass-end anchors.
If you run your equipment in salt water just spray it down with something like wd40 before you go out and when you get back wash the heck out of it and spray it again with the lubricant and you can make it last for years…
Good video! I know this is video is a little older but how is the boat holding up.
Still holding up really well I actually sold it to my brother in law. Ended up going to a 22ft bay boat. Hope to get a video out soon on it. I do miss the grizzly tho
I'm looking at a few of them myself.
Like your honesty.
Awesome video! Thank you for the review. I would like to know how shallow you can go? Does the pods really help?
It’s will draft around 8 inches. Loves the pods! Allow it to float in just inches of water!
I have one get wet in choppy water. Other than that I love it so
ty i wanted to get one but i was holding off because i go to the coast every once in awhile and i wanted to make sure the saltwater would be ok . were u just in the bay with it?
Mines in the saltwater 2 or 3 times a year. I just make sure it’s cleaned good when I get back from my trips and the motor flushed out. Never had a problem.
Where did you mount the transducer on the transom or float pod? Will it read while running?
About to mount side scan transducer this week on 1860 cc....also wondering about pods and placement of transducer
Buying a 2072 tracker with a 150 mercury I liked your video help me make my mine up thanks Gary Obrien
Good video I’m really interested in buying a grizzly 2072 by summer by 2022 and good to see some input. One of things I’m worried about is I am mostly going to be in saltwater and how the trailer holds up is it galvanized? Or aluminum or how is it holding up for you in the salt water? Kelly
It’s not aluminum or galvanized but does have a coating that protects it a little. I’ve not had any issues with the trailer and saltwater. I normally wash the trailer with fresh water every time after it’s used in saltwater and seems to be just fine.
@@FURREVEROUTDOORS thanks man appreciate the input!!
Been looking for anouther center council I like small boats I have no need for a big boat I like that its aluminum I had alotbof nicks in fiberglasd I fisg salt water and love the flats and I think I would havrvto put a spottet deck on mine but that would be it I don't travel far either and my last boat had a merc 90 it was a hell of a motor I think I would likr to go one step bigger with a jack plate like 100 so bigger motor and spotting deck love your boat....is the trailer good reg tires not those small tires I do travel 200 miles to the coast....stero is cool but yeah just a port waterproof speaker easy to ......less shit to mess with the better for me ..........Bad ass boat.
How low can it float
Some spots in the river get 3ft deep. If you know it would be helpful in my decision to buy a tracker
You will be fine in 3ft. Several spots I take this boat hunting are anywhere from 1 1/2 to 3ft. May have to trim up a bit. But floats really shallow
Had the same boat, every weld cracked and popped loose after 9 years. While it was still under warranty once a year it would go in for replacement. It made it a few years with no problems but finally a windy day on the lake cracked two critical weld along the hull and on of the supports pushed its way through the hull causing a massive leak. I barely made it back in time. Your experiences may vary but I will NEVER buy anything motorized from Bass Pro again.
I understand that. I never had anything happen but ended up selling it and buying a bullsbay 2200 bay boat and I don’t regret the decision one bit. Hope to get a video out on it soon
Probably not your cup of tea, but do you happen to know of a good oar lock socket that fits in this boat? I have a regular 1860 with a tiller
Is that an 8" draft in fresh water while in shallow water or is that saltwater draft.
I’ve done both
Sir my question to you would be if it will stand up in saltwater? A constant saltwater use. I am here in South florida so I will switch up between fresh and salt. Now the one I am looking at will be 2072 model. Your thought and insights would be appreciated.
I truly believe it would! I would just make sure after every use in the saltwater, you flush the engine with freshwater also wash the trailer. I do all that and pressure wash the inside and you can’t even tell mine is used in saltwater.
@@FURREVEROUTDOORS thank you sir for your response. I am glad to know I can get an honest answer for a person like me who is looking at a cheaper build, expectantly looking at an aluminum boat for saltwater. By the way my brotha you have just gotten another sub to your channel.
I appreciate it brother! They may be the “cheaper boat” but I love mine, put it through some things I probably shouldn’t have lol but it’s held up like tank!
@@FURREVEROUTDOORS all the more reason to listen to you as someone who has it and has have experience with it.
I use my 1860 on the salt every day in N Fla. No probs...
Thanks for the video man been looking at this boat alot and im about to go to Cabelas and order the same boat. What i love the most about this boat is that it is rated for 7 passengers. I like the 60hp because its lighter then the 90. Never been on one is it quiet? Does it handle good if its choppy out? How many passengers have you had on? I love that boat its simple and lolks to be heavy duty.
I have fished 4 on it very comfortable. 7 may get pretty tight lol. Not gonna lie, I love the 60 on it. Me and another guy went a mile or so out in the ocean a few weeks ago and caught several fish. When it gets pretty choppy, this boat will allow some spray to come over the bow but it’s not terrible as long as you trim the motor right and keep the front up. Also the motor is super quiet!
@@FURREVEROUTDOORS Thanks bro appreciate your reply. Good luck fishing and be safe.
Thanks for the excellent vid !!!!
I would upgrade to 90 definitely
GREAT Boat! What about LED interior lights?
Great idea!
Do you regret not getting the 2072 because I’m between your boat with the 90hp and the 2072 with the 150hp I just don’t think the 2072 is worth the extra $10k
No not really. The 1860 has allowed me to get in some pretty tight spots but also still big enough to handle big water.
What size prop you have on motor?
Great review!
Hey buddy, I haven’t found anything about how shallow this boat runs. What’s the shallowest water you have run it in? Thanks
The boat will draft about 8inches of water. with the motor trimmed I can run in a foot or so. We hunt and fish some shallow areas so I try and put it through the test lol
@@FURREVEROUTDOORS I appreciate you bubba, I’ll check them out and great video!
Great video man about to pull the trigger on one. I fish alot of rivers that I'd have to walk the boat through in like 3-8". I'm wondering how shallow do you think she sits with the motor trimmed up?
Around 8-12 inches you can move a little with the motor trimmed. Any shallower I’d push it. But it floats real shallow especially with the pods on the back.
How does it do in inshore saltwater
And what maintenance u do
Does great inshore! I run the pamlico sound in North Carolina several times a year and handles rough water well. After every run in saltwater I flush the engine with fresh water as well as wash the boat and trailer to get the salt out. And once a year I take it to the marina to change all fluids and have routine maintenance done.
Can I mount seats above the fuel cell or will the screws hit the fuel cell I just got my new 1860
You should have enough room. I’ve got a cooler mounted there for a seat and didn’t have any issues.
Do you just drill out the rivets to mount the trolling motor and put it back with self tapping screws?
Yea I drilled them out and use a rivet gun to put new ones back in
Looking at the same boat bit older 2008 and it has the 40 merc 4 stroke .Would it be enough power.I do local lakes and rivers and never big nasty water
Yea I think you would be fine. Normally that’s what they come with. That 40hp would run you and couple buddies high twenties to low 30s if I had to guess.
@@FURREVEROUTDOORS wow , thanks for the fast reply.I appreciate that.
@@FURREVEROUTDOORS I have been calling around to Bass pro and they said none of them ever came with a 40 but they were not working there back in 08 which is the year of this one .Im a bit nervous it wont be enough and id be stuck .
If you know your going duck huntin with 4 guys, swap your prop out to a lower pitch. Gets you out of the hole a little better with the weight.
HEY BUD FIRST TIME WATCHING YOUR videos loved it i have a question how far out in salt water do you think this boat will be able to go out would you feel safe 5 miles out or in the inlet with this boat i also live in nc ,, just moved how far would you go out in the ocean ..? thanks for your time
It really depends on the day and how the ocean wants to act. A month ago I had about 2 miles offshore running out of little river inlet. Some small chop but handled it just fine.
Tks great info
You think i can haul this with a 2wd 4cylinder 2019 tacoma
Oh yea shouldn’t be problem
@@FURREVEROUTDOORS i think towing it wont be the problem, im debating if it will have enough to get the boat out of the ramp.
Still shouldn’t be a issue as long as the ramp isn’t crazy steep. My wife’s Ford Escape done it when my truck was in the shop
What size and pitch prop are you running??
Could use more storage, should put smaller gas tank and use some of the space for storage
A little more storage would be nice but I do like a big gas tank because when we are out in the pamlico we are running at least 16 miles or more a day
How did you mount your trolling motor?
Would you recommend a jack plate
Probably wouldn’t be bad. Boat floats in real shallow water so it would help out running faster in shallow water.
How does the stock trailer do in salt water?
No issues yet. I try to keep it washed as good as I can after every use in saltwater.
Have you had any issues with saltwater to this day. I’m only asking because the video is 2 years old lol
None at all!
Just bought one with the 90
How many hours/miles a day are you getting on a tank? Solo fishing or with one buddy.
The most I ran a day was around 35-40 miles. Had a full tank when starting and burnt around 3/4 a tank. Great on gas!
@@FURREVEROUTDOORS thanks
And tight lines
I think You just talked me into one,I’ve got a friend that has one with like 20 hours and just wants payoff
Jump on it brother!
Picking it up Friday.And I’m
Excited as a kid waiting on Christmas 👊🏼
Could a family of 6 spend a day on the river in it ? Me wife and four kids ? Mainly want it for fishing with the occasional family day out on it
You could but may get a little tight at times. If your able, Mabey go with the 20/72 if your able to spend a little more.
Roughly how much have you spent on the accessories you put on?
I may have $80 in rod holders, and the trolling motor and depth finder was probably $500 a piece.
If that were mine i would have a short jet engine the steering wheel system to the side for the river
do you have a hard time getting fuel in the tank?
No not at all.
Hey man, awesome boat. Do you ever hunt from the boat itself? If so, how do you go about putting a blind on it with the center console? I’m looking at these for a hunting and fishing rig but worried about how the center console would interfere with a duck blind
At one time I use to hunt from the boat and had a scissor blind on it. Worked pretty well and killed several ducks. With the versa track on the boat you have several options on how you wanna make your blind. The console may stick up a little but honestly never had issues as long as it’s brushed in real good.
@@FURREVEROUTDOORS Awesome, thanks for the response man. Did you build the blind or was it something like an Avery, Beavertail, etc.?
I just used angle iron for the brackets on the track system and make the blind out of conduit. Was far from perfect but it worked lol
front storage dimension ? (please)
Switch to a four blade prop. Same pitch. Engine digs better out of the hole and will get you on plane faster.
Not sure if you will see this and maybe you have already addressed it but how is this boat compared to your buddy's Alweld boat?......
For the most part they are pretty close. The front and back decks are bigger on the grizzly and the grizzly has a 19 gallon built in tank where his had a removable 6 gallon tank. Handling wise and riding they both do well
@@FURREVEROUTDOORS really appreciate the feedback. I'm looking to buy a 1860 and those two boats seem to be very similar but I haven't been able to really compare them.... maybe you could get a video comparison of the two if yall had time, just a thought
We will definitely try to do that.
I'm getting ready to order one in a few weeks. Trying to decide if the 90 is worth it. I would like to tow a tube or knee board with my family. Will the 60hp work?
A 60hp would work, but if your planning on pulling a tube or knee board I may would upgrade to a 90hp.
I’ve been considering one of these. My only worry is I live 7000ft above sea level and I’m curious how it would handle in the lakes in my area and I like an aluminum utility boat as a family boat for a multitude of reasons. How would you rate this boat as far as a fishing/hunting boat but also a family excursion boat? I’ve been looking at tons of boats and honestly I ended up more confused that I was before even starting my search.
It’s a great family boat in my opinion! During the summer, myself, my wife and our two boys are always on it riding around, fishing, swimming and just having a great time! That’s what I love about these boats. Can be fishing boats, hunting boats and family boats all in one.
My biggest concern is high altitude lake running. I prefer the look and functionality of a utility boat but I’m wanting to make sure I can take kids tubing but at the same time get to places you can’t normally get to during hunting seasons. I don’t need a race boat so as long as I can get up to 30-40MPH and feel comfortable on the water I’m happy!
I’ve never tried tubing with the boat but I have had this boat way back in creeks and shallow waters. Not sure if altitude will change anything. I wouldn’t think so but not sure.
I'd say let er rip tater chip drop into the Pathfinder rez and blast off.
A 70 hp. Suzuki Would Be Great 👍
I would love one!!
Go ahead and upgrade to a 90hp, I'll take the 60hp and put it on my boat.
Keep all hands and FEET inside the boat.. lol.. trust me♿
Some people just learn the hard way lol
Colorado you go 33mph you're gonna get to the other side of the lake before you can take 2 sips of coffee.
About how it is around here
A shark mouth on the front and it's name on the back