How To get Cardo audio on your GoPro - Helmet Vlogging Setup
HTML-код
- Опубликовано: 11 июл 2024
- Today I'll show you my Vlogging setup, how to get the cardo (group) audio on your GoPro and how this is split in 2 separate channels for editing purposes.
This biggest problem using a normal patch cable from the cardo speakers to the gopro audio is that the cardo speakers are powered, while the mic is analog. The GoPro will adjust the volume to acceptable levels, meaning if there is any audio from the Cardo the Mic will be reduced to almost zero.
Vlogging setup:
GoPro Hero 9: amzn.to/3ImXU6v
GoPro AudioAdapter: amzn.to/36d3BHd
3.5mm TRS Audio Splitter: amzn.to/36auPOE
3.5mm Microphone Attenuator Cable: amzn.to/3qiUziP
3.5mm Stereo Break-out Cable: amzn.to/36rKPvs
Mic: amzn.to/34TjqSC
follow me on social media:
instagram: / m0tourist
Facebook: / m0tourist
------------Content--------------------
00:00 Intro
00:28 Changes from the old setup
00:52 No more GoPro Media Mod?
01:52 Leveling Cardo audio with the Mic
03:15 Helmet Setup
03:31 Special Cable for Cardo Adio
04:26 How the setup is put together
07:07 Fitting the setup in the helmet
07:36 What does the stereo break-out cable
07:46 Stuffing everything in the helmet
08:04 Dual vlog audio
------------Content--------------------
⚙️ GEAR ⚙️:
🏍 BMW R1100GS
GoPro Hero 9
Cardo Packtalk
🪖 Helmet: Nexx Xwed 2
🧥 Alpinestars valparaiso 2: www.hansvanwijk.nl/alpinestar...
👖 Alpinestars valparaiso 2: www.hansvanwijk.nl/alpinestar...
Boots: Alpinestars Toucan
🧤 Alpinestars SP8-V3 : www.hansvanwijk.nl/alpinestar...
🧤 Vanucci VCT Special: www.louis.nl/artikel/vanucci-...
🥾 Alpinestars Toucan
Music: www.bensound.com - Авто/Мото
Are you using a second mic or can you use the cardo mic for both?
You cannot use the Cardo Mic without modificaiton, it requires you to splice in (and solder) a 3.5mm jack to the mic. For me this worked fine, but I'd some complains from my riding group that this caused an echo sometimes.
Therefor I went back to using a second mic, but in principle the Cardo mic works fine (ruclips.net/video/_04rosJPXI0/видео.html shows how i soldered this in the past).
🅿🆁🅾🅼🅾🆂🅼