I have seen it done and have done it a few times. Generally using a more powerful laser than needed for just cutting and high pressure inert gas like nitrogen is going to work better than compressed air or oxygen. The goal is to keep the metal cool and prevent the metal from burning. I want to say I saw a 3/8 inch hole cut in 3/4" carbon steel with a 10kw laser, which seemed to be close to the smallest hole on that thickness with any sort of reliability. Anything smaller is probably best to drill on a CNC mill.
A few things could be at play. Try moving the drawing to primary document, see if it will modify in that screen. I don't think flycutting/scancutting can be done in the parts menu. But once you modify the drawing in primary document you can send it to the parts menu..
Birçok değişken var. Doğru kesim parametrelerini ayarla. Telafi ölçünü hesapla. Flycut, ince malzemeler için kullanışlı (under 1mm) çünkü hızlarınız yüksek olur. Kalınlık arttıkça kesim hızın düşer. Yapabilirsin.
It has a very limited drawing menu. You can make some very basic shapes, there are some useful preprogramed shapes, but I've maybe used them five or ten times over the past 5 years.
cypcut coedge common cutting but be careful your size. compensation, toolpath do it. Always check and try. Other way combining common surfaces in another drawing program.
A question.
Is it possible to make a hole with a measurement smaller than that of the thickness?
What tool could you use?
Thanks
I have seen it done and have done it a few times. Generally using a more powerful laser than needed for just cutting and high pressure inert gas like nitrogen is going to work better than compressed air or oxygen. The goal is to keep the metal cool and prevent the metal from burning. I want to say I saw a 3/8 inch hole cut in 3/4" carbon steel with a 10kw laser, which seemed to be close to the smallest hole on that thickness with any sort of reliability. Anything smaller is probably best to drill on a CNC mill.
I am Makwana of Nashik, Maharashtra, India.
Is fly cutting increases numbers of piercing?
Very useful feature thanks for sharing. Keep it up I am learning a lot 👍🏻
Kesim parametrelerini kesinleştirdikten sonra, telafi ölçüsü ekleyip deneme yaptınız mı?
What if have an old bystronic and you want to flycut ,does the program has any campability with other file format
Hello
I have tried to do this with imported autocad files and it does not recognize the lines or the circles
Do you know how I can do it? thanks
A few things could be at play. Try moving the drawing to primary document, see if it will modify in that screen. I don't think flycutting/scancutting can be done in the parts menu. But once you modify the drawing in primary document you can send it to the parts menu..
Cypcut' ın desteklediği formatları kullanmalısın. Örneğin dxf.
I may be making the oblongs plus the microjoin?
Hi sir i have 1.5kw machine i want to cut square hole but the square is small and big size so can u explain me for tht
Birçok değişken var. Doğru kesim parametrelerini ayarla. Telafi ölçünü hesapla. Flycut, ince malzemeler için kullanışlı (under 1mm) çünkü hızlarınız yüksek olur. Kalınlık arttıkça kesim hızın düşer. Yapabilirsin.
Có cách nào cắt bay mà vẫn để được lỗ mồi không bạn
Can you manually draw shapes with cypcut like you can with auto cad
It has a very limited drawing menu. You can make some very basic shapes, there are some useful preprogramed shapes, but I've maybe used them five or ten times over the past 5 years.
@@smallshoplasers8785 True.
Does it only apply on square holes? Or can it cut round ones as well? Can it cut square holes with fillets?
very good video!!!
How to do common cutting program in cypcut?
cypcut coedge common cutting but be careful your size. compensation, toolpath do it. Always check and try. Other way combining common surfaces in another drawing program.
Saya ingin dapatkan modal