How to use Cypcut Edge seek function (English)
HTML-код
- Опубликовано: 3 окт 2024
- Machine being used is a bescutter 4'x4' 500 watt fiber laser machine.
Settings may need to be adjusted for larger machines or different capacitance sensors. If you are using small plates you would likely want to reduce the sheet size to something close to what you are using.
Newer fancier model of the machine I own, can be found at bescutter.com/... - Наука
Hi, friend, this video of yours helped me a lot, I'm looking forward to testing it, I'm Brazilian, I work on an HSG3015 machine, we didn't use this function because we didn't know it... if everything goes well, I'll come back to thank you again S2
Hey i am an apprentice and inuse a machine like this for work if there is any infor.stjon you can givr me sonthat i can get cleaner cuts would he much appreciated i will sub to youre channel
Nice! I have seen the function there but never taken the time to mess with it. I don't do alot of production cutting, so its just not been a big issue, but seems to work good so I will set it up!
Yeah, a big thing is it can correct for angled sheets so you can get closer to the edge of a sheet with a part with a little less adjusting. We tried setting the plate size fairly small and it still worked ok, so it could be adjusted to more fully use square drops.. My shop is the opposite with almost everything being production work making my own products, no custom work. Which is why there really is no contact information on my videos, I just do these for fun.
Same thing. Thanks for the video bro...
Now I don't need to correct the sheet angle everytime. ❤️👍🏽
'If you are using lower skilled employees' thats messed up
So if im not mistaken this will stop the laser from running off the metal
Can you please help me sir I get a new machine with 10 kw laser when I start to work the laser don’t work I checked everything the laser power is on everything is good
Is there any parameters to switch on the laser in the computer before starting ?
Sir, do you know the code for unlocking advanced options in the edge seek? My machine doesn't want to measure with precision, so I was hoping that I could set up something there.
Sir please my help me coedge kiya huaa item kese single pcs होगा
I want chamfering hole . Please help me
Good 👍
I have a naif question ,, is this software special for fly cutting ? Can any CNC laser turn to flying cutter. ?
Cypcut is a software hardware combination. You can't just install it.
When I first tried Edge seek, the cutting head hit the blade platform :(
Because the information typed in was wrong ?
@@nickthedane1 or he didn't have the head over the material. I have my edge seek set to run slower than the factory settings, that way I have a chance to stop the machine.
@@smallshoplasers8785 you and someduff are right
Hi 👋 can you download cypcut on a separate pc and do all the work with nesting and then just upload it to the laser machine ?
So yes and no.. You can do most of it on a separate PC, but you would still want to load your cut parameters on the laser, that way any small changes can be saved on the laser.. So on my office PC the layers are set with the laser power at 0% that way if I forget nothing bad happens, it just doesn't cut.
@@smallshoplasers8785 Thank you
you will want a cypnest , which is also from Friendess.cypnest is quite a professional nesting software
@@shichris6681 hi, thank you