all your videos are so good, just before any repair in my 2002 VW Bora 1.6; I watch your videos they are really helpful, thanks mate keep on doing this wonderful service - I am from Sri Lanka
Holy smokes that so much easier than the front. I planned on removing the front struts because I wanted to put new strut mounts in. It took me forever even snapped a gear puller pulling the brake hub off and 3 inches of the coil was missing on both sides they snapped crazy.
Awesome video! Love your videos man, always to the point. Other videos point out steps that you do not have to take whatsoever when it comes to simple things like replacing shocks or struts on a vehicle.
Hey Man Nice video when I've tried to remove & replace my rear shocks on my Seat Leon I've unable to undo the two bolts at the top. I really didn't know it was that easy to do. I'll give it another go :)
Learned lots over the years, big thanks! Need some more help on this one though.. One of the two bolts at the top has rusted out. How do I fix the mount for it??
BMAC VAGS Dude, your video on opening up the door panel saved me so much money - thanks! For some reason, there is no longer a beeping sound if I open the driver door after having left the lights on. Can you do a video on how to fix that please?
Thanks man, how about removal springs in back, shock absorber in front with springs and rubber strut ? I would also like to know how to remove the plastic cover under the steering wheel the opposite site of the glove compartment you didn't show us this one :) it's important if you would like to change over there some fuses (you have it removed on your previous video with the braking switch replacement) , remove the fuse box. How to remove the back bumper and the whole area of the boot. I know it's a lot but maybe you could do that. Thanks again.
hi man I have a 2001 golf automatic transmission and I have a g68 sensor problem because the car is stuck in third gear can you show me how to replace it please. and thinks for this video because it saved me a lot of money.
I got a Haynes manual, it was really handy. I don't know if all the engines have a similar set up, but I had to replace the starter on the 1.8 20v turbo engine. Remove the battery and battery tray, then use use a ratchet and sockets to undo the wiring loom in the way, and disconnect the cables to the solenoid. then the starter motor is held on with two bolts
Which mk golf, mk4? It is a bit different on mk5. And you said you would put a link in the description about jacking the car up with jack stands. I cannot see it in the description.
Mine come out at an angle. The don't go straight up. You can watch the video on my channel when it's on the life getting the manifold bolts fixed. One snapped
![How to change rear shock absorber on VW GOLF 4 (1J1) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/kce7jYElY6A/mqdefault.jpg)
![How to change rear shock absorber on VW GOLF 4 (1J1) [TUTORIAL AUTODOC]](/img/tr.png)
at last, someone with some knowledge who talks in laymans terms, cheers bro, top stuff, easily understood,
Thanks for clear and simple instruction. I now have confidence to tackle the job.
all your videos are so good, just before any repair in my 2002 VW Bora 1.6; I watch your videos they are really helpful, thanks mate keep on doing this wonderful service - I am from Sri Lanka
Hate the intor music. 10seconds I could live without but overall love the video and insight. Thanks man.
I'm with you there brother, what an abomination of bombastic distaste, is their intro noise!!!
Holy smokes that so much easier than the front. I planned on removing the front struts because I wanted to put new strut mounts in. It took me forever even snapped a gear puller pulling the brake hub off and 3 inches of the coil was missing on both sides they snapped crazy.
Awesome video! Love your videos man, always to the point. Other videos point out steps that you do not have to take whatsoever when it comes to simple things like replacing shocks or struts on a vehicle.
Hey Man
Nice video when I've tried to remove & replace my rear shocks on my Seat Leon I've unable to undo the two bolts at the top.
I really didn't know it was that easy to do.
I'll give it another go :)
Wow that looks easy! I hope it goes that weel for me! Thanks
Thanks man, this helped alleviate my concerns.
Nice video man... how do you remove the rear coil springs have u a video for that.
Top man, your vids are great mate, you explain everything really well
you are the king of VW!!!!
Learned lots over the years, big thanks! Need some more help on this one though.. One of the two bolts at the top has rusted out. How do I fix the mount for it??
Wow that looks and seems really easy, got to get me some new one now :)
Simple as that?! Great video!
BMAC VAGS Dude, your video on opening up the door panel saved me so much money - thanks!
For some reason, there is no longer a beeping sound if I open the driver door after having left the lights on. Can you do a video on how to fix that please?
Watch my boor module repair video
I love your videos greetings from hungary
u halp me alot wit your video thanks
hey wondering if you could do a video on how set timing from scratch on a tdi mk4?your vids are so easy to follow!
Mate, you think you would be able to shoot a video how to change rear axle bushings? I Enjoy your vids. Grtz from the netherlands!
Thanks man, how about removal springs in back, shock absorber in front with springs and rubber strut ? I would also like to know how to remove the plastic cover under the steering wheel the opposite site of the glove compartment you didn't show us this one :) it's important if you would like to change over there some fuses (you have it removed on your previous video with the braking switch replacement) , remove the fuse box. How to remove the back bumper and the whole area of the boot. I know it's a lot but maybe you could do that. Thanks again.
the rear springs can be removed by pressing your leg down on the brake caliper and that will give you enough room to remove the spring.
hi man I have a 2001 golf automatic transmission and I have a g68 sensor problem because the car is stuck in third gear can you show me how to replace it please. and thinks for this video because it saved me a lot of money.
Thanks for the video am off to change them on my touran which is the same 👍
Good luck
Hi mate any chance of a video on removing the starter motor and cleaning it to stop that common grind squeal noise on start up.
Thanks!
I got a Haynes manual, it was really handy. I don't know if all the engines have a similar set up, but I had to replace the starter on the 1.8 20v turbo engine.
Remove the battery and battery tray, then use use a ratchet and sockets to undo the wiring loom in the way, and disconnect the cables to the solenoid. then the starter motor is held on with two bolts
Way to easy that design :)
To take the spring itself out are there any more bolts or steps to do after you take out the shock absorber?
Which mk golf, mk4? It is a bit different on mk5. And you said you would put a link in the description about jacking the car up with jack stands. I cannot see it in the description.
Bravo 👏👏👏
Did you put the axle stand on the rear beam?
cud u put a video up of where to jack the car n where to place the stands if u dont mind :)
Yesir!
thanks :)
Nice vid,
excellent video
Mine come out at an angle. The don't go straight up. You can watch the video on my channel when it's on the life getting the manifold bolts fixed. One snapped
is the same set up for most makes of car?
this same as golf mk5?
wow! many thanks.
Thank you!
Fair play m8 that was a crackin vid thanks gunna do it myself or can i drive to u lol
Where are you located?
BMAC VAGS Liverpool
thanks to the video
What was wrong with the shock absorber?
Why else would he replace it?? Common
Thank You...
Thank you for watching
forgot to say i mean on the front of the car if u dont mind
Are you also the voice of truth?
No, but he is super funny...lol
Y he