How To Install An Ice Maker Box In Your Home
HTML-код
- Опубликовано: 18 авг 2023
- How To Install An Ice Maker Box In Your Home. This will show how to plumb a water line for a refrigerator. The compression stop was a bad idea. An Ice maker box installation is a better set up that will work much better. Subscribe here :ruclips.net/user/ThatFixItGu...
Oatey Ice Maker Box link: amzn.to/3qGi6xt
Open Mesh Sanding Cloth link: amzn.to/3vmvt4i
Benzomatic torch head link: amzn.to/2X7BGRu
Plumbing solder link: amzn.to/2AioK2c
Mapp Gas link: amzn.to/2TMJB4V
Soldering flux: amzn.to/2M2NLkR
Fitting Brush link: amzn.to/2zFg5qD
Jersey Gloves link: amzn.to/2M7VXQA
Inspection mirror link: amzn.to/3dclbZY
Copper fitting and pipe cleaners link: amzn.to/3UoxDMW
Ridgid ratcheting copper cutter link: amzn.to/2WjeX3K
(Amazon Affiliate links)
Follow us on Facebook: / ufix247
We love helping people and hope that we are doing that!
Guitar Clip by Audionautix is licensed under a Creative Commons Attribution license
(creativecommons.org/licenses/...)
Artist: audionautix.com/ 
Развлечения
Thanks for the tips! Burn mat for sure is a must! I like the spray bottle idea too! Scorch marks in my basement...
We need to put one of these on for you!
Beard is getting woolly brother! Love it!! Josh
that is an interesting valve box I've never seen that always just hooked up tubing in basement and had a coil of it behind fridge, but this is nice being able to shut it off right there.
When it's like that they always eventually spring leaks in the tubing. Learned the hard way in rental properties. Better to install the box.
I installed one of the cheesy “kits” in a house built in 1975 to support a fridge we moved in in 1993 that had the water dispenser. In that situation, I brought it up right through the flooring in the middle, right along the quarter-round, or where it would go, anyway. In the crawl space, I used a “vampire” tap into the copper main line. That worked well enough, but I never felt good about the tube just coming up through the floor and being directly attached to the fridge. I’m about to set this up again in a house from 1948 - this time I have a box, WITH a water arrester on it.
Helpful Video Brian!
Still at B? Remember when you started out and now you're heading towards 100k
Subscription! Wow Brother Man. Keep it up
Yes I am. Took over as a team lead. I know bro. Such a wild journey. I never though 100k was possible. Thank you and hope all is well.
Great video and information Brian. Hey Brian why couldn’t you be my neighbor and friend here in South Central Ky😅? Your friends are lucky to have someone like you 👍
turbo torch makes a short hot flame so you don't burn things behind pipe as easy, but they are noisy, and you can't change flame size much you have to run it full out or tip will be messed up trying to run it low. so you have to switch tips for large to small pipes.
Great video brother. Lots of good tips
One time when I was at one of the hardware stores, I saw some kind of copper installation kit that used glue. If that's a good way to go, it would be useful in these tight areas where fire is a potential hazard. Are you familiar with gluing copper pipe fittings and is it a good permanent installation method?
Turbotorch is the best-pricey but well woth it.
Wouldn't using 2 45° fittings have been a tighter (better flowing) connection?
ive always had issues soldering 90 angle pipe fittings. i get one side soldered then start on the other end and well it melts the solder on the original end i am am just going back and forth trying to solder that angle piece. afraid i would of called a plumber on that one.
i always love when I'm doing a big project and keep turning water on and off and I just crack it like you did to fill pipes and check for leaks then forget to open it all the way LOL then I'll be wondering why my shower is so weak and stuff.