This NEW Dryer Vent Upgrade Changes EVERYTHING! EASY How To Install DIY!
HTML-код
- Опубликовано: 2 фев 2024
- ITEMS I USED ON THIS VIDEO:
- Dryer Vent Seal Cover - amzn.to/4bI60G5
- Dryer Vent Extension Tubing - amzn.to/49nqOBA
- WORX Oscillating Tool - amzn.to/42nwhG9
- Foil Vent Tape - amzn.to/4bp8yJz
- Assorted Deck Screws - amzn.to/42pHYvS
- Caulk Caps Savers - amzn.to/3SKqmro
- DAP Extreme Stretch Caulk - amzn.to/3Oxih74
- Dripless Caulk Gun - amzn.to/3uo6MYD
- Cordless Drill - amzn.to/484E6lp
- Level (9 inch) - amzn.to/48495Oc
SHOP MY ONLINE AMAZON STORE AND CHECK OUT ALL THE TOOLS I USE! www.amazon.com/shop/genevo9
This NEW Dryer Vent Upgrade Changes EVERYTHING! EASY How To Install DIY!
DO YOU HAVE QUESTIONS ON YOUR HOME REPAIR OR DIY PROJECT? GET TIPS, ADVICE AND ANSWERS! BECOME A FIX THIS HOUSE MEMBER!
Become a FIX THIS HOUSE Member by clicking on this link: / fixthishouse
Please Subscribe To Our Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@yahoo.com
DISCLAIMER:
Videos produced by Fix This House are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Viewers doing projects at their own home are doing it at their own risk and Fix This House cannot be held liable if they cause damage to their homes or injury. Fix This House cannot claim liability with all applicable laws, rules, codes and regulations for a project. Always stay informed of your local building codes! Happy and SAFE renovating!
#Dryer #Vent #DIY - Хобби
ITEMS I USED ON THIS VIDEO:
- Dryer Vent Seal Cover - amzn.to/4bI60G5
- Dryer Vent Extension Tubing - amzn.to/49nqOBA
- WORX Oscillating Tool - amzn.to/42nwhG9
- Foil Vent Tape - amzn.to/4bp8yJz
- Assorted Deck Screws - amzn.to/42pHYvS
- Caulk Caps Savers - amzn.to/3SKqmro
- DAP Extreme Stretch Caulk - amzn.to/3Oxih74
- Dripless Caulk Gun - amzn.to/3uo6MYD
- Cordless Drill - amzn.to/484E6lp
- Level (9 inch) - amzn.to/48495Oc
How did that opening ever pass code? Asking for mice...
Typically, wouldn't it be better to locate the exterior dryer vent farther away from the AC Condenser Unit?
Just thinking about all the extra lint that is usually emitted out of the dryer vent.
wait why cut back into framing? just add 2x or? and screw pipe to that. Seems like that framing was there for a reason 4x4's and 2x4's I've never seen that extended out past foundation and siding but must be there for a reason SO DO NOT CUT
So I see many things wrong why did you cut original pipe so short? then why did you insert other pipe inside first pipe? will catch lint plus why di you cut away framing of house. is that tape exterior grade? No need for 3 inch screws that is lite weight plastic maybe 1 1/2 screws max. sorry Been remodling homes for 15 years and owned rentals for 40 years did a lot of work myself
Really nice design, however, my concern would be the color since exposure to sunlight would damage it before long.
That flexible vent outdoors was likely installed to get the dryer exhaust away from that AC. I've seen dryer lint clog AC condensers.
This is a Chesterton's fence situation. You should not destroy what exists until you know why it is like that in the first place. Otherwise, by "fixing" something you end up making something else worse as an unintended consequence. People, generally, don't go through the effort to build something for no reason.
While the intention of extending the vent was correct, using flex tube was incorrect. You will need to go to a HVAC supply store for the rigid ventilation tubing to do this right.
Either the dryer was added after the AC install or vice versa, but if you don't extend the dryer duct, you'll shorten the life of your condenser(AC).
Another bonus is to use a dryer vent brush and vacuum at the lint trap with extended reach crevice tool, and while the dryer is running to catch the lint stuck to the inner walls of the duct while using the vent brush. For this reason alone straight duct is the better way to go over flex/ridge.
On a final note, the use of fabric softener will cause a film to developed on the lint trap screen, as well as the duct. After vacuuming excess lint from the trap, test how much film from fabric softener is on the screen by running water slowly on to the screen. You will see it puddle up or not go through the screen. Now use a little dish soap and a toothbrush and clean the screen and re-test and you'll see the difference! This will improve the dryers ability to vent better... A better alternative to fabric softener is a 3-4 wool dryer balls "woolies" bouncing around will remove static and help dry clothes, while softening clothes naturally... Replace as needed, when clothes aren't as soft...
@@chuckhoyle1211 Mmm hmm. Was thinking the same thing. The cutting of the wood was a destructive action and it can never be undone. Maybe you're even making the house less structurally sound. 😬
He should've thought about whether there was a less destructive way of going about things before tearing the place apart. Could the dryer vent tube simply be extended out further to avoid having to cut the wood? You'll need a flat surface to mount this specific dryer vent so you might need to add a piece of plywood or something with a hole for the vent tube to pass through. 🤔
Great product, i might get one. One word of advice though, at around the 6:00 min mark you put another piece of pipe inside. I think you should remove the newly installed piece inside. The dryer blows out lint and will be caught in between the two pipes and will build up over time. Kind of the same reasoning behind why dryer vents should not have screws connecting them (building code).
One of the fisrt things I saw...thanks for saving me time in typing it all out! ;)
Ok, but what is your solution to his problem of not enough stick out of the original pipe? Commenting on a problem without a suggested solution is not very helpful.
@@johnirwin1837 He trimmed too much of the original vent pipe 4:50, the reason for the extension pipe.
My concern is that lint will eventually catch on the bottom side of the pop up device and clog the vent.
@@dmacarthur5356This looks easier to clean out than a flapper close to the ground has been for me.
I was a major appliance repair tech for 23 years. Anything that creates turbulence is bad for dryer vents. Had to clean these out when they were fully plugged. A basic aluminum vent cap with the flapper works best.
We have had one of these vent hoods since the 1990's. Did it because we needed it to shut the vent securely to prevent cold air coming in. Best vent hood ever! REMEMBER TO CLEAN IT PERIODICALLY!
same having it back in the 90's. need to take cap off to get lint in it out.
My mom installed one at the house I grew up in sometime around the late 80's. Great vent. It was still on the house in good working condition when we sold it in 2019.
My mom did the exact same thing in the 80s. Her vent is much higher off the ground, which is also good because of the amount of snow they get in the Midwest. It does a much better job sealing off the cold outside air.
Around 1990 I worked at a place that distributed these. We installed one on the second floor of the farm house. Every couple months I got a ladder and cleaned lint out of it.
Yep, I installed one in my home in the mid-90's as well.
Something I think you neglected to talk about and is probably why the original was done with that burried tube. That is lint can get pilled into the A/C condenser and block the heat transfer surfaces reducing its efficiency and making it eork harder. Your solution while good will allow lint to get pulled into the condenser.
That is a serious mistake having the dryer vent and the A/C condenser that close together.
Agreed. The lint is the real problem since it is hard to get out of the A/C coils.
First thing I thought of seeing the A/C that close. I like the vent but the lint will definitely be a problem for the condenser.
Huge mistake. Gonna cost them in a service call. Then pay the hvac tech to redo the dryer right. People don't realize the V in hvac stands for ventilation 😂. Use an hvac tech for your dryer vent and you won't have silly mistakes.
-hvac tech😂
I have the same thing on my house, have to hose off condenser every month!
@@NoflectioN HVAC "ventilation" refers to inside the house, when the fan is on manual with neither heating or cooling action, not ventilating the outside condenser.
We installed one of these vents last summer. It's made a huge difference in the amount of heat/humidity getting trapped in our laundry room in the summer and blocking tons of the cold in the winter. They're also paintable, so if you don't want this white thing hanging off your house, it can blend in super well. So much easier to clean, too! Definitely recommended on our end.
Thank you so much for sharing! 🙏🏽😊
Installed on on a home we purchased in 2019 after realizing that rain pouring off the roof was entering the vent pipe! Never looked back. Best design available, no cold air getting into the dryer anymore.
oscillating tool--the best tool I bought that I never knew I needed until I bought it.
I resisted for years but yes
Yes, I didn't even know about this but immediately was intrigued when he used it...and I was so glad he stopped to mention it.
I love when new products are presented; sometime a gem is found. Thank you!
Even though it will clog up in a week because of the sleeve that he slid in, the caulk condom is a great invention.
Yep, he cut off too much of the vent and then needed the sleeve to reach out farther, huge mistake.
Yep nice catch.
@@Resist4 If you look at earlier images, I don't think he cut off anything, looks like he removed the existing sleeve and replaced it. Still an issue, but he was dealing with what was there already.
@@JonathanMurray Ah okay I see that now, thanks for clearing that up.
Should have put the extension around the outside of the original ducting. yeah, gonna catch all the lint.
I bought one just like that from our True Value Hardware store 20 years ago. It still works great.
I installed this type dryer vent in the mid 1990's and it still works great. I periodically remove the top and remove the floating seal cap and clean the lint off the inside parts to ensure the floating cap does not bind against the plastic guides and get stuck. Takes about 5 minutes.and good way to ensure trouble free vent operation. Will definitely buy another if this one ever gives up the ghost.
Interesting product and I think it was the best choice for you! Thanks for the video. I would have put the extension piece over top instead of inside, it will be a collection point for lint as well as a bit of a reduction in air flow.
One big enough to cover over the top of the outflow may have been too big for the new vent system.
@@jimmiller6704 you can get extenders with one end big enough to fit the original vent pipe, the other end is the same diameter as the original vent pipe. It's a standard connector, similar to the ones you can get for copper or various plastic pipes.
Thank you so much for the advice! 👍🏽😊
Thanks for this. Some folks here say they've installed these as far back as the '80s; but I hadn't been aware of these until watching this video. A breeze to replace the old vent and the new one is much better. Thank you!
I’m glad I could be of help! For me it’s 2024 version 😉👍🏽🙏🏽
I watch every single one of your videos, even if it's something I initially don't think I'll be interested in. They're always interesting and I always wind up learning something. Thanks for being such a good teacher. Cheers!
I have used this type of vent for many years. It seals well, has very good airflow for the dryer exhaust, and eliminates the issues with the old "flapper" vent. It does need to be cleaned occasionally -- I usually do it once a year or so. Simply lift the cover remove the floating cap, and vacuum stray lint. I did have to replace mine once over the years due to deterioration of the plastic making it brittle and subject to cracking. Not sure if a quick coat of paint would resolve that or not. Anyway -- highly recommended!
Been in area since at least the late 80's
With the larger profile, it seems it could be damaged by wind. The vent I want to replace is on the side of my house about 15 ft off the ground and with my neighbor's house so close, it creates a bit of a wind tunnel. I think it would solve some of my current issues, but I suspect the wind issue would be worse. Any suggestions? Biggest current issue is birds lifting the flap and building nests in the vent.
Same here. Maybe late 80's. Pre-internet, back when you got those catalogs in the mail that had thousands of various products.@@brucewhitefoot
@@davidmcdaniel3693 - Plygem makes a vent that is louvered so the parts that flip open leave a smaller opening, AND it has a sort of screen that is intended to keep out critters (insects could still get in because a screen fine enough to keep them out will catch all the lint).
2 issues I recognize immediately with your location. 1 these do require cleaning out. Pulling lid off, and actually pulling lint out by hand. At ground level, not a problem. 2 the sun/ozone does age this plastic, and at least the lid needs replacing every couple of years. Just something to keep in mind. And to be transparent, I'm no expert with these, I've just had a couple for many years.
I think this product has a best design for a vent cover. I am getting one this week. Thanks for the tutorial!.
The attempts with the burried duct and later with the side directed vent were to avoid lint from the dryer exhaust getting sucked into the AC unit and clogging the fins. It’s a real problem. Ask me how I know. When the AC compressor is running, it is sucking all available air in, with the lint. That’s the larger problem. Nice improvement with the vent, itself. You’re going to be pulling the case off that AC once or twice a season to clean out the fins unless you redirect that dryer vent.
I agree. Been there...done that.
I immediately thought of that after I saw that.
Correct
Do not run both at the same time
@@chipcook6646 - it has nothing to do with running them at the same time, except that will worsen things since the AC compressor will be sucking air through the fins.
The lint will still attach to the AC compressor even when the AC is off.
@@stevebabiak6997 😵
I've had that style dryer vent installed for many years now. You have to clean it out a couple extra times during the winter due to it getting clogged easier because of the condensation trapping the lint and sticking inside. If find your dryer isn't drying as fast as it used to then that vent is clogged up and needs cleaning out. My vent line is very short so it blows my floating cap right out if I open it while the dryer is running.
I vent my dryer inside in the winter. I don't lose conditioned air through the dryer to outside that way AND I get 2 bonuses - 1 heat is not wasted when venting inside and 2 we get the extra humidity as well.
One typical electric dryer puts out nearly 20,000 btu's of heat. That is like running 4 electric space heaters.
Note: you cannot do this with a non electric dryer due to carbon monoxide issues.
BUT you can install an intake tube from outside to the dryer itself to save your conditioned air.
Too much moisture equals mold inside. Be careful.@@crazysquirrel9425
@@crazysquirrel9425I thought about doing this but was worried about high humidity. Is that a concern? Also, how did you configure it? TIA
@@markd5067 Is it warmer hotter or cooler in the Humid July?
So long as you don't have water condensing on your walls, you should be OK. Normal humidity range is between 40% and 60%.
If it feels too musty/sticky, switch to outside discharge for 30 min or so and open a window or door.
Typical dryer will pump out up to 400cfm's of the air in your house to the outside.
That is a 20 x 20 x 10 foot ceiling room worth of air every MINUTE. Two rooms worth for feeble dryers.
How long to pump out a house full of air?
1200 sq ft house with 8 foot ceilings are typical for many places.
So that is about 9600 cubic feet of air.
So you need to run it about 24 min or so to remove any high humidity. Less dryer cfm's then you run the dryer longer (with clothes in it of course, vented outside).
If you have an older home that is not air tight like newer ones, you are already drawing in dry winter air into your home.
If you home is really old and has wood paneling, you NEED that extra humidity (ask wood stove users about paneling and dryness).
You can run a dehumidifier to control humidity. That would be cheaper than paying to reheat your home every 30 minutes. If you have kids running in and out constantly, that too replenishes the house with dry air.
One reason for dryer fires is that people's homes are too air tight. Dryer cannot breathe very well and the slow air flow through the vent deposits a buildup of lint. That and not keeping the lint screen clean of course.
I did this method:
ruclips.net/video/rYsT0rvZqyM/видео.html&pp=ygUSZHJ5ZXIgdG8gaGVhdCBob21l
ruclips.net/video/8A9R7gsuNlE/видео.html&pp=ygUSZHJ5ZXIgdG8gaGVhdCBob21l
I wanted to do this but unable to because of dryer location:
ruclips.net/video/1t6576tPDVg/видео.html
DO NOT VENT INSIDE for gas dryers due to carbon monoxide.
@@markd5067 Was wondering if you had a humidifier on your furnace. And what do you have it set at?
Any idea how much water it takes to run a humidifier?
I disconnected my dryer vent to the outside and plugged the hole. Took the vent tube and ran it into the top of a 5 gal bucket, 1/2 filled with water and a little dish soap. Top lid has about 15 1" holes in it to allow easy air to escape.
When dryer runs, it blows the air onto the water catching lint that wasn't trapped, warming the water and adding humidity to the air.
I would have preferred to run that vent tube into another room but the house setup won't let me so natural air circulation has to do it. It does work pretty well though.
The setup is entirely reversible. I have to switch from the bucket to the outside in late spring. If I could con the wifey, I might make a fresh air intake for the dryer for summer use but that entails making a big hole and running more pipe.
Think how a high efficiency furnace piping works.
Thank you, this solves one of my problems with a slab on grade apartment build regarding the dryer venting to the front of the apartment. This product will allow it to be installed low and unobtrusive,,,nice!
Thanks for the video. Got tired of cold air coming in at the dryer and also at bathroom exhaust fan vents from the other types during windy days. This product solved the problem.
As per instructions, you have a limit on how many 90 degree turns in your dryer vent system are allowed as too much back pressure will limit performance.
Just installed the new outside dryer vent. Your video was perfect. Easy peasy. Thank you for turning me on to this product. What a difference!
Bought a ventless dryer (LG) off Facebook last year, $200. Great dryer, no hole in the wall needed, no added negative pressure sucking in air from outside.
I empty the water into a nearby sink, but it can be easily plumbed instead. And it still has a traditional lint filter. There is one more thing, about every 6 months to slide out the exchanger and knock any lint off. Wouldn't trade any of that for the hassles of dealing with an external vent exhaust again.
Nice, would not cut out the drip edge (2x4), if it was possible to build-out the tube. Looks nice though.
He literally created a 6” section of wall that all the rain running down will go into his wall rather than stay outside as designed. I would have cut the cheap plastic part before I cut into the outer barrier of my house.
@@michaelalbert8474Right, I thought the same.
Thank you for sharing your advice! 🙏🏽😊
@@FixThisHouse at minimum remove the vent and paint the cut wood to protect it.
Literally installed like an IDIOT
Woooow, i thought the gas line was a bad install.... the dryer guy was like "hold my beer"
@@zanna9857I don't think k it was staged. He made a couple of mistakes. Which can not only cost him money. It can cause a fire.
@@nans969 - it was staged, and the stooge making this video doesn’t know how to do this properly. So of course there will be mistakes.
@@zanna9857 @stevebabiak6997 I wholeheartedly disagree. The buried dryer vent shows signs of corrosion and imminent failure. This is totally something a "joe jobber" would have left for the next person, have you ever even worked in residential maintenance? Why all the hate for this channel, did your girlfriend step out on you or something?
I’m glad you saw that episode my friend 🙏🏽😊
@@jeremiahbullfrog9288 - you think it’s bad to dislike bad information? Really?!?!
Like watch that whole video, and just count how many mistakes this stooge makes. Any home inspector would tear this work to pieces.
Thank's very much for your video's, my wife and I love you. We can follow what you do, thanks for being such a great teacher and guy.
This was an excellent video. Now looking to see how I can install this on my home!
I have had this vent type for 20 years.. bought it at Menards. It has worked great! Once a year i take the top off and clean any vent debris that has collected from moisture. Highly recommend.. buying another one for my new retirement house.
They work perfectly and have for 50 years. But 𝑑𝑜𝑛'𝑡 𝑖𝑛𝑠𝑡𝑎𝑙𝑙 𝑡ℎ𝑒𝑚 𝑠𝑖𝑑𝑒𝑤𝑎𝑦𝑠.
Thanks. It will help to keep out the cold air
This Air-Flow product is a wonderful replacement parts. Thank you so much for your guidance and workmanship. Great job my friend 💯
those caulk caps are a must. dont leave college with another mouth to feed.
GREAT VIDEO! i never knew what that was on the side of my home and wow! was I glad i saw this! we have/had 4 pets and who knows how often the last owners looked at it, it was packed full of pet hair. glad i got it cleaned out and, hopefully, safer for my family!
I'm going to try out this product. The one I have has 5 louvers that open when the dryer is working that tend to collect hair and lint over time requiring monthly cleaning, even with the dryer machine screen. This product seems like it will be easier to keep clean and lint and hair free.
I’ve watched your channel for quite some time. I really enjoy the different projects and things that you’ve done. I also would like to say how very sorry I am for your loss. I lost my mother to kidney failure, so I know what you went through with that. The old saying time heals all wounds is very true. Both my mother and father have been gone for sometime now. But I think of them often and I miss him very much, but you carry on. As you said, we will see each other someday again. He’s a piece of our Lord be with you and your family.
Sincerely, Ken
Thanks for the demo and video. Your video inspired me to upgrade my janky exhaust from 1950's Have a great day
i have 2 of those in my house installed first the plastic ones which lasted only 2 year because heat makes it so fragile then upgraded to the metal ones. They are great product specially the stainless steel one. This past winter when temperatures were low something i noticed as you can see the steam traveling path in colder weather much clearer the issue was is if your soffit AREA HAS VENTS AND THEY ARE 6 to 10 feet above the vent it just suck all the steam and condensation into your attic. That is a perfect recipe to cause mold in your attic
Brother!!! Thank you so much for this video!!!! I keep getting small birds coming into the vent and setting up home! I have to go in and clean it out, then I try to put several metal wires to block their entrance but it's not full-proof. This is awesome! Thank you!
I’m glad I could be of help my friend! 🙏🏽😊
What a great product, I will definitely look for this in my local stores. Thank you
I was unaware of this new type os dryer vent. It does look like it will save energy and be durable and easy to clean. Thanks.
I think it'll make people use more electricity because its restricting the air flow because it has to lift the piece of plastic up
While using a square vent uses a square or circle flap to let the heat out and they're both lightweight to open up by air flow nothing gets restricted because the square or circle flap opens up front wards instead of topways.
That new one could help burn out your dryer heating element in the dryer or just make you dry the clothes twice
I have one and it works great. Did have to replace the cap after about 9 years (UV damage caused it to crack). Probably should have painted it. Mine was a slightly different design where the cap fit on (like a yogurt container). I like the hinged version you have better.
Thank you! Looking to upgrade my dryer vent and this is a great option. Concise walk thru video.
Thank you so much! I’m glad I could be of help! 🙏🏽😊
I don't have this one but it looks really good. Thanks for sharing.
Wow. Amazing, thanks for that I will definitely will upgrade my vent.
I have one but looking at the material of the vent cover decided to paint it since the plastic used can yellow and become brittle if not painted.
It was easy to paint to match the house on the outside and didn’t affect any bit of the performance while greatly increasing the UV protection.
Thank you so much for this. I WILL be switching mine out to this because of you. :)
God bless you always.
I put same one on my house 17 years ago. Still good. Plastic does yellow over time
Wow, that Worx oscillating saw is awesome, its almost like it is operating in fast forward mode!😄
All joking aside, oscillating saws are awesome.
Wow... That looks like a great upgrade.
Looks pretty good. My old-style dryer vent eventually gets lint buildup and jams the flapper from closing, I have to clean out the lint every 2-3 years. Nice thing about this is it isn't super expensive. So many of these "this version is better" videos the "new version" is quite expensive.
Thank you another great video. I like this product.
You can paint those also a matching color to the house. That dryer discharge probabaly needs cleaned out as that cup on mine flies out if the lid isn't down. That cup you were showing was barely lifting off. Love that dryer vent though big help in keeping outside air out.
That new air flow seems to be excellent.
The product is great I have used. For years VERY noticeable temperature difference in the winter from reduced air infiltration . but your dryer air flow is still low check the whole discharge system.
Thank you for a super idea! I really love your channel!!!
Thank you so much! Really means a lot! 🙏🏽😊
Excellent video and good job. Thanks for sharing.
Thank you my friend! 🙏🏽👍🏽😊
Good stuff bro! Love the videos, keep em coming!
I have tried a lot of dryer vents in my 69 years on this planet and none of them lasted very long and all had similar flaws...mainly just being cheaply made from thin, usually galvanized, tin material. I ended up paying $30 for one on Amazon made from stainless steel and it was well worth it. Bear in mind I just have a basic setup with a hole thru a piece of 1/2" plywood where a basement window was removed. I think that is one of the most common so just thought I would mention it. Stop buying the cheap ones from Home Depot and spend the extra money. It's worth it in the long haul. The one you showed would not fit my application but it does look like a great option too.
Oh and good point on the multi-tool. I have one on my list to get next !!
Good new product. Video was helpful. Thanks. Subscribed.
Looks great, I'm gonna get one right away. Last winter -10 degrees we had a strong wind out of the north, blowing straight into our dryer vent. I opened the dryer door and it was like a freezer inside. This vent would definitely prevent that. Thank you!
Store your food in there 😁
@@swiftaudi Doesn't work when you have to dry your clothes.
@@QBRX LOL I was only kidding.
@@swiftaudi Really, I thought you were serious.
@@QBRX Man, emotion is so hard to convey I can’t tell if you’re joking now!
I liked the product, this would help energy efficiency. Put the extension on the outside of the dryer tube, same reason as others commented. Always force air out, to dislodge any built up lint. I use my leaf blower to blow out my dryer vent, an architect friend’s trick. 👍
I have that dryer vent and its worked great for past ten years….
I have been doing home repairs for many years first time watching your show I believe you should have seal the surrounding areas before installing the new Dryer Vent also by placing an additional vent extension tube inside, the dryer vent tube you have created a place for the lint to accumulate and eventually create a blockage
Very cool. Thank you for your time.
I'd like to see follow ups of things you did. Like a year from now, how is this vent cover holding out? Was there a lint trapping problem, etc. Your videos are excellent!
This is a great product! I have been using mine since 2011, yes that's correct 2011, not 2024. This product has been around for a while now.
Installed similar product about six months ago and while they are pricey for a bit of plastic, THEY WORK GREAT, my dryer was alway cold and the floor area around it with the shitty flapper style. Now the dryer and area are always at room temperature. I will never go back.
I installed one of these on our house in 1996. Still works great. It does need to have the lint cleaned out regularly. Also, the outside of it should be painted for UV protection.
Thank you for great tip!👌
Awesome!! Great video thank you!!
My old vent is damaged and in need of an upgrade. My new dryer vent is on its way. Thx for the video!
I installed that type a few years ago and it is great. My only concern is that sunlight exposure seems to make it brittle eventually. Definitely be careful cleaning it in extreme cold weather as the plastic will break if you are not gentle.
Gotta love all the experts that know everything about everything I say nice job 👍
Some of us actually have dryers and vents.
People are trying to help. This guy did make several key mistakes that have been brought up in the comments.
awesome design!
Great video! I was not aware this vent existed!
Nice educational video. Thank You
Look like a good solution, but I hope no garden gnomes or little boys mistake it for a tiny toilet.
Lol
Gnome toilet..omg LMAO
😂
😂😂😂😂😂
I read the negative comments on the dryer vent cover and there were quite a few that mentioned that the cap did not stay closed and the disk would pop out of the assembly. Even without the cap coming open, some said the disk would flip over, thus eliminating any protection from backdrafts. Some additionally said the disk would get jammed in the channel and not open up fully, which could constitute a fire hazard from an overheating dryer.
It seems like a neat idea, and perhaps has potential, but improvements are apparently needed before it is ready for prime time, especially at its price point.
I like that dryer vent that is totally awesome
Great video!
good job buddy, thanks. been thinking about getting one of these.
Looks very good
Good video, i like the vent design. I would have found some way to route the tube farther away from the AC condenser unit because lint can become a problem for it. And always try to keep tube joints connected in such a way as to be very smooth inside.
Nice video! Thanks
Thank you too!
I’ve had this product on my dryer vent for over 20 years. It works perfectly every time. Have had zero issues with it.
Thank you for sharing my friend! 👍🏽😊
I have a 20-year-old version to replace. This will be easy to do with your video instructions.
Great idea.
My dryer vent is in a similar location, I’m going to check this out.
Please let me know how it goes for you my friend! 👍🏽🙏🏽😊
@@FixThisHouse I’ll try to remember to take some pictures
dude!!!!! this would work! i have 2 dryers and 2 washers installed in my basement..and the winter i vent it inside for warmth etc..but summah i shoot it outside and those red squirrels are my nighmare!!!! i will be looking into this , this spring for sure!!!!
Another option is to get a heat pump high quality dryer and eliminate the exhaust vent all together. Plus, we'll save on your heating and cooling bills by not exchanging the inside air with the dryer pulled in outside air.
Great job!
Very interesting - thanks!
I would think that this will correct the position of a vent that is too close to the ground. Nice idea, too. Saves on cleaning the collecting lint on the shutter pieces.
Interesting design. It actually makes sense if used properly. I agree with a few comments about the installation. The previous install with the tube running under the dirt is away from the AC unit. Lint from the vent can mess up the AC. Another problem you might run into will be a clogged vent pipe. You put a raw edge of the extender inside the pipe. It give lint to collect and clog that defeats the exhaust flow. Also, a huge fire Hazzard.
And allowing rain to go directly off of the siding into the inside of the foundation, instead of having a sill to direct it away. Not recommended. It should have been sticking out another 4" to 6"
You put the new extension inside the existing. The edge is gonna catch lint. A touch of caulk on the screw heads to prevent rust.
Excellent video. I would also use some silicone to cover the rough metal edges inside that device, make it a smooth transition, so the lint does not get caught on it, and eventually clog it.
Those rubber things do save your "kock"
Looks much better than our regular one! Liked and subscribed!🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉❤✌🏻✌🏻✌🏻
Nice job and great video! I do think the tube within a tube adapter is going to gather a lot of lint. I would plan to check it in a few months to make sure it's not building up.
Thanks for the tips!🙏🏽😊
Interesting dryer vent. It seems like it will make cleaning the duct very difficult to clean as it doesn't look like the brush will make it through the tight bend.
I installed one of these thirty years ago. Works great but you do have to clean them out occasionally.