Surveillance robot using ESP32 Cam Module Upgraded | Hash Robotics
HTML-код
- Опубликовано: 15 окт 2024
- Hello Humanoids...
Here is the video of the upgraded surveillance robot using an ESP32 cam with 3D printed parts.
When compared with the first version I have added a separate servo for pan and tilt camera movements and for the constant power supply I have used a buck converter to power the ESP32 module.
As of now, it will only work in the local wifi network. I will upgrade the robot to access from anywhere.
Components Used...
3D printed chassis
ESP32 cam module
DC motors
L298 Motor Drive
12V battery
SG90 servo
Buck converter
Jumper wires
Get source files here: github.com/has...
Get 3D files here: hashrobotics.g...
watch my other projects...
Hash V2 Biped robot using ESP32: • Hash V2 Biped robot us...
3D printed 19DOF humanoid robot using Arduino: • 3D printed 19DOF human...
Mini humanoid robot using ESP32 Hash Junior: • Mini humanoid robot us...
ROS for Beginners | Part 01: • ROS for Beginners | Pa...
Stay connected...
Facebook: / hashrobotics
Instagram: / hash_robotics
Twitter: / hash_robotics
Our legend is back🥰🥰🥰
everything works fine thanks, only i want to run 360 degree pan and 180 degree tilt rotation, please guide
When will you upload video on how to access this robot from anywhere
Wow! Very good project! Congratulations 👏👏👏👌
Thanks
They uty475fhfufufgfubnmnvzxsg
Dear your efforts is very good. I need your help please. In your program i face one problem that pan option is not working when i use it live streaming stopped but all other things is working very good. Please help me to fix this problem.
Me same problem can anyone help me 😢
were you able to fix it and if so can you please tell me how
@@arulstar9151 were you able to fix it and if so can you tell me how
I Want To ank When I Upload The Code. And Then When We Press the servo Button And Then The servo didn't work And The Streming Also Camera Captured Failed? 😢
Super all the best for ur next project 🤩
Thanks .keep supporting
May I know the reason, why use (buck converter to esp32 cam) can't it be combined with the servo to take 5 volts in L298 Motor Driver sir, thank you in advance because your project is very good.
I tried that. You can cannot both but when I control servo there is a slight voltage drop happening so the esp32 not getting enough voltage and its restarting. So I decided to supply separate voltage
@@HashRobotics thanks sir
Congratulations! This is a very good project. I wish you continued success :)
Thanks. Keep supporting
hello can you send me the BOARD MANAGER URL please. thank you
How many usable gpio pins in esp32 cam ??
Bro pan and tilt is not working, would you please help me out.
All connection are correct but my pan and tilt also not working. Pls help.
just a question, why don't use 5v output of L298 to supply power to ESP32 ? I work with arduino uno and always use L298 to control motors and also supply power to my controller. Maybe with ESP32 it's different but using sensor shield with arduino I can control differents servors also. I wanna learn about esp32 to change my projects to this news chips
esp32 cam is more hungry to power than arduino
Sir ishe others device se kaise operate kare ,ye sirl local ip address per work kar raha,
Bro
Can I get the code please......I am not able to do it please bro
Bro how to run 16 gear motor using esp8266
For that what driver I should use
Could any body figure out, why I am facing very high latency...???
Of the order of 1430 ms
@harsh I triend your code - Servo is working fine. Video streaming is also working...but no activity on the wheels in any direction...any thoughts on this...?
Please check the console and circuit connection
Super project, i would like to change esp32 cam to a TTGO T-Journal cam and the Ln298 with a TB6612ENG, can you help with the code and wiring.
Never used those modules before. Let me check please.
Built the project but it doesn’t work 😔
Merci pour la vidéo et le partage bisous de France 😘❤️
Merci...
Chasis 3D files are unable to open in your given link.
URGENT URGENT URGENT
my car is not showing in my wifi of my mobile and Your car controlling webpage can"t be reached now, please fix this issue as soon as possible i have to submit my project tomarrow , failing to which will result in loss or failure in exams.
hope u understand
I downloaded the file I saved it on esp32cam but the motors don't work when I press the motor command buttons only the servos work
have you found a solution yet?
same thing is happening for me
@@izzykhan123 not yet
can i change tilt from GPIO2 to GPIO4 and change in code const int tiltServo = 3; to const int tiltServo = 4; ??
Sir can I control this car from anywhere in the world
sir, where is the url preference for the esp32-cam board?, Please hope it is answered. Thank you
You will get once you upload the program. Watch the video.
i need to add pir sensor to this.is it possible?
Great project! Inspired me to make my own robot. Instead of a servo-controlled camera, I used a 160 degree angle lens. As a result, I have a few free GPIOs left. I would like to extend the project and program an arm (from your other project) into it. What do you think, can I use GPIO 0, 1, 2, 3 and 16 for this? Best regards!
dude, where did you get the code for webpage?
can you share the code?
@@TheGreatSage_Heavensequal The HTML code for the website is included in the .ino project. You modify it at that location.
@@BBBTVPL thanks man
Keep in touch please
I'll clarify any doubts i get
How we can charge battery
how to make the video frame rates a bit high so the video doesn't break?
Weight of the 3d printed car without components
Bro how to make self patrolling robot with aurdino or esp 32 cam
Awesome...wow. ..is is possible to add input value like WiFi.rssi() into webpage and update it every 10seconds? If yes How I can do it?
Can you install a LED bulbs 💡
Please give your phone number There is a lot of doubt about this
U r good bro
Good work and nice video.But when I boot the ESP 32 I am not getting IP address even after so many efforts.Can you have solution to this.
Have a look at Dronebot workshop tutorial on ESP32 cam
for me the servo is not working can anyone help me with this??
The code is not work can you help me
Can u specified the buck converter
mr. how do i get this library? #include "dl_lib_matrix3d.h" - Congratulations on the project! show
while i am uploading the code after the done uploading thing i am not getting anything in com3 ...please help
try a different usb c cable.
How to access robot anywhere , please tell me sir
Hello bro. Where from you?? India??
The wifi could not be connected in the serial monitor while uploading the code in esp32 cam by Arduino. Please help me.
If you are using arduino make sure that constant 5v is supplying to esp32. You can also use external power supply too. And check your wifi credentials also
@@HashRobotics My code is upload successfully but after that when i click on the serial monitor and press the reset button of esp32 cam the connecting part of wifi is not working.it seems ...........................................like this but not connected with esp wifi.it is continuously doing that thing. Is there any IP address change in the code? I also text you on Facebook can you please reply. I need your 1st version code of this project.
Hi
After uploading the coding did you remove gpio 0 and gnd connection?
@@ismailtonmoy5237 simply having .......................................... for a long time means device is not connected to wifi - Kindly note that the ESP32-CAM only works with 2.4 GHz WiFi networks. Pls check that...
Great video, as usual! I would like to do it and integrate it into Home Assistant with EspHome, do you know it? would it be possible? Thank you so much
Nice vid without the full coding footage
How to do the track?
Sir, i have built this project but it is not connecting to my wifi
make sure your wifi credentials are correct
@@HashRobotics yes all the credentials are correct and I have also tried to connect with different wifi but still it is not connecting to the wifi
@@HashRobotics sir that code is working now
Sir,Could you extend this project by adding pir sensor to detect human being to this and how to code for that. it will be very helpful for me sir.
Sir how to program for adding pir sensor in the same code which you have given .
Could give some idea on this??
can save in micro sd ?
Where is board manager url
Good God Bless You Amen
Thanks .God bless you too.
Impressive!!!
Please help
Error compiling for board ESP32 dev module
What error?
@@HashRobotics (hash_robot_face_expression_esp32) The program is not being uploaded/
Showing an error(error compiling for board ESP32 Dev Module) please please help me sir
Cost?
Sir apki robot bali video me speech recognition module ka use kerke video banao
Hello bro..I want to control it over global network how can I do it
Working on that will update
Ya I also wanted to learn about that
can i control the robot from pc ?
i think yes
Can you code accesspoint mode? Plz
Sure will do soon.
@@HashRobotics when... plz do soon
Brother after uploading the code when I click on the serial monitor and press the reset button of the esp32 cam the wifi is not connected. can you please tell me the solution?
what message you are getting...the solution is in the message...
HELLO SIR CAN YOU PLEASE MAKE A FIGHTING ROBOT VERSION OF YOUR HUMANOID PLS
Bro super project bro but I need circuit diagram bro please
help pls I’m gonna fail my class this is for final project
PLEASE MAKE A FIGHTING HUMANOID ROBOT WITH CODE PLEASE
upload a perfect code pan tilt is not at all working
this is the why i don't believe in your channel code
Hey bro I guess your subscribers has decreased
Sing I watched last it was 7K+ subs
No bro. Not 7k. I think you are mistaken. Now only it is reaching to 5k subscribers. Also last two months I haven't uploaded any videos. So it's increasing slowly
@@HashRobotics
Hmm
Sir ishe others device se kaise operate kare ,ye sirl local ip address per work kar raha