Alfa Romeo 147 GTA V6 3.2 24v 100K miles Full Engine Rebuild. (part1 Crankcase Assembly) Busso V6
HTML-код
- Опубликовано: 18 фев 2023
- In this video I show some tips of how to assembly the Glorious Alfa Romeo Busso V6 Crankcase. This Engine has covered 100K Miles.
Parts
Brand new piston rings,
main bearing ,big end bearing supplied byebspares.co.uk
Second hand Cylinder liners (supplied by @alfaromeocity3805 )
Ajusa Gasket set from @autodocuk
Timing belt kit and other parts supplied by alfashop.co.uk
Thanks for watching and see you soon for part2 of the Video 
Авто/Мото
This is a really helpful video. looking forwards to part two. Appreciate the effort you put into it.
Thank you so much. Coming soon. Stay Tuned. Ciao from Edinburgh
Hi Alfonso,great job,top class.Martin
Thanks mate. Pop in when you are close by. Ciao Alfonso
che meraviglia
aren't all (2.5/3.0/3.2) conrods the same, 130.9 mm, and the difference in stroke accommodated by different piston compression heights?
are the alfa 164.3.0v6 12v QV piston valve holes the same size for the intake and exhaust valves, when you put them in place, should the arrow point towards the distributor head?
I start to feel some lost love vibes ;D My 2.5 sits in garage waits for me to get better conditions for it's rebuild and I am watching if not video of driving Alfa with V6 a video of it being rebuilded.
When will be finished I will make a test drive video too
@@alfaromeofanclubedinburghuk awesome, can't wait for part 2, I'll make those 2 parts as my fairytale to sleep
@@Painkiler99 holy crap you're here as well :p
@@r2dter yeah! Just couldn't miss so great video
Coming soon 😉🇮🇹🍀🏴
is it better to use mineral oil or synthetic in the alfa 164.3.0v6 12v engine? if the outside temperatures are -39-+36 celsius..and which viscosity is the best?
Love your work
Which silicone did you use to fill the main cap on the flywheel side ? You filed it when its installed ?
Thanks 💪
Thank you so much. So I used Renzoil black sealant. It's one of the best on the market. Indeed I put sealant on the surfaces and after squeeze some into the holes.
does it hurt if the tensioner of the 164.3.0.v6 12v distributor head is adjusted approx. 5mm above the marked tension? because I would suspect the original oil tensioner to be tighter.?
classic mechanicing...experience is golden....my 3.2 v6 GT engine has 142,000 on it...i'm saving up for the rebuild...whats a ball park for top end and full? im in newcastle?
Hi. No major issues. The important things are the shell conditions so recommend to inspect them and change if is the case and the cylinder liners. In that case where like an easter egg out of measurements and big end shell where worn. The reason of the full rebuild is because the Diff blown up and was due a Timing Belt but the main reason was that the coolant bottle had some oil in it.
Hi, great video! Where did you ger the O-rings for the liners? I can't see them in Eper. Mine is not 3.2 but 2.5, do you have Part No?
Thanks
Hi thank you so much.
You should be able to order them from @Autodoc
m.autodoc.co.uk/ajusa/7191095
or try EB Spares if you are based in UK.
Hello thanks for all.
Too bad we cant see the crank assembly
Have you ever heard of oil pump failure, oil pump chain on those 3.2 ? Cant find new one
Thanks
You are welcome. Unfortunately I couldn't film the crankshaft assembly at the time. Never seen a chain failure yet myself. Here there is a video of the oil pump assembly.
ruclips.net/video/k0UqkQsOjmI/видео.html
Unfortunately I Don't think that are available anymore. But you can try EB SPARES based in UK. They have lots of Busso V6 Parts.
@@alfaromeofanclubedinburghuk OK many thanks
Great video! Is there a Part 2?
Coming soon
Great, I have to do all this myself. Need cam belts done, Valve cover gaskets, coolant has some black bits in the reservoir, thinking that my head gasket may be waiving me good bye. Regardless, I am gonna get the engine out and do it all while it's out. Your video is a great guide! @@alfaromeofanclubedinburghuk
Good morning, my name is Paolo Lizzola, please, can you tell me where I can find the piston rings of a 3.0 V6 24V Alfa Romeo engine, I am restoring a Lancia Thesis with an Alfa Romeo 3.0 V6 24V petrol engine. Thank you very much
Salve Paolo. L'azienda che uso in Inghilterra per I componenti del BUSSO V6 si chiama EB Spares o Alfashop
www.ebspares.co.uk/alfa166/engine25_alfa166.cfm
www.alfashop.co.uk/
Hanno possibilità di reperire molti ricambi. Le auguro una splendida giornata Alfonso Cutino
I haven't been able to find part 2 of this...?
Coming soon. I had some family and health issues. Stay tuned
where can I purchase a cone to insert pistons? do you know the cone measurements
www.ebay.co.uk/itm/WISECO-Tapered-Piston-Ring-Compressor-Sleeve-/204267908639?mkcid=16&mkevt=1&_trksid=p4429486.m46890.l6249&mkrid=710-127635-2958-0
93 mm bore
Quick question. Did you replace the head studs and nuts ?
No are the genuine ones
i didnt see it, but why rebuild at 100k miles ? My 2.5 have 300 000 km and doont need rebuild - compression 14,8 bar and no oil consumption (4000km 0,5L)...
The reason of the rebuild was the oil in the coolant
Nice work. Are the EB spares replacement ring set genuine factory? Only because 10 years ago I found out that my gta which had a rebuild had faulty rings especially the bottom one ( oil control ring)They were not genuine. It was burning 1litee of oil every 250miles at the time. I had get a set from Italy through Autolusso and that was a ballache to source 10 years ago. 10 years on she doesn’t burn any oil whatsoever. Also did you set the ring gaps which I had to do? I think that might have been part of my oil issue.
Hi. No aren't genuine but are good quality. Indeed you have to check your ring gap. In this case it was 0.65 mm of gap which is way too much. So I had to replace the liners. From EB Spares you can get also brand new liners and Piston with rings.
Thanks for the appreciation ❤️🇮🇹🏴🍀