i've put this on all my boats and jetskis for like 20-ish years now. it's like a foot massage compared to that sandpaper grip tape crap that used to come stock on jetskis. and it is way more durable than that terrible marine carpet. it blows my mind it took so long for the marine industry to really embrace it.
*How hot does the Eva Foam get? Eva Foam available from us is UV Resistant and stays cool to the touch even on hot summer days. We have been on full black EVA Foam (HydroTurf) in the middle of the day in summer barefoot with no issues. Forgot to add that little note to the video.
I did seadek and Marine mat which is pretty much the same thing. I can tell you this , from a black foam to a white foam , the difference in surface temp can be as much as 20 degrees. However , if you go to a lighter color , stains will show up more versus darker tones. I tried to stay somewhat neutral , with light greys and light blues etc......Still hard to keep clean but on a kayak when you are overtop that surface all day and just a foot or two from it , it does make a huge difference.
To be fully transparent, Seadeck and I assume others EVA foam decks, will deform and discolor in reflective sun light. I read the reviews after I made the mistake
So why invest in it when it doesn’t last? After it warps and fades you need to worry about how to get the old stuff off with the adhesive. Must be a headache!
The real solution is to use pure aluminum and have it polished to a high shine. That’ll last a while! Make sure it’s shiny like a mirror, itll tan you right up too.
I’m replacing the carpet in my 2004 tracker PT175 with hydro turf, so what can I do about the gaps left between the lids and deck or box edges due to the old carpet having been rolled over the edge of the lids??? Can I coat exposed aluminum with a rubberized coating to deaden noise and cover exposed aluminum??? PLEASE, AND ADVICE WOULD BE GREATLY APPRECIATED!!!
Have a 18.9 Xpress aluminum boat. It has a bed liner type stuff sprayed on the decks. I would imagine one would have to remove this coating before installing the EVA. Yes or no?
This video was so needed for me,you completely showed what is needed and what is involved in what to order and which way to face it was another question answered 👍 thank you Ryan and the other gentleman sorry drawing a blank on his name maybe in the the future videos you could and a name off to the side so everyone gets knows each guy on the team 🤷 and job boys, thank you 👊❤️
I paid $68 a roll and got it cheaper when I bought 3 of them 94 by 39 were the size of the rolls black white and grey camo and the grey one with the black stripes
Do you have a video on how you did that completely gray boat with the slick decal that was shown at the start of the video? I really like that design. Also how long was that boat.
I’m not incredibly far from the Pekin location. I have an Alweld that has almost been completed and can’t decide between carpet and this stuff… how is this on compartment lid noise? Will it be louder shutting lids than carpet would be?
No we have not, and even if we did, you still need to get it scanned. No two boats are exactly the same. We have made that mistake before and nothing fit right from one boat to the next.
don't think i would rather clean my seadek on my duck boat with anything other then a pressure washer. teak layout foam is alittle sketchier but ive never messed my bass rig floor up using one.
Question, do you find the gaps around hatches being a problem on boats that use to have carpet and now are EVA foam? I’ll definitely be ordering from you all on my DIY project. Thank you for all the great info.
New to this product. Can you use it in fiberglass boats as well. If so should the surface be smooth. In my 95 ranger the floor area is kind of bumpy. Idea's
@@TBNationOutdoors my question was HOW does it hold up to salt water sailing. Salt water is much more corrosive than fresh water. Breaking down the material and adhesive at a much faster rate. I’m wondering how long it would last in the ocean. A few years, a season, a few months, etc..
Has anyone in the comment section used this in a ten foot bass raider or lond prowler? How mant sheets do you think id need for that? I think its basicall a 10x4 ft boat
If you do happen to accidentally let blood sit on this shaving cream even the cheap stuff will make blood vanish and leave a cleaned spot where it used to be just a free tip
i've put this on all my boats and jetskis for like 20-ish years now. it's like a foot massage compared to that sandpaper grip tape crap that used to come stock on jetskis. and it is way more durable than that terrible marine carpet. it blows my mind it took so long for the marine industry to really embrace it.
Every product should have a straight forward no bs video like this.
Could you do a more detailed video showing how to lay it around lids, doors, hatches, etc?
Can do
Great Video, I live in Peoria My jaw hit the floor when I saw pekin. Might have to stop in some time.
I like the blue and grey distorted look
If I had to guess, Hydro-Turf has probably been around longer. But they stayed in the PWC market back in the 90s. But I could be wrong.
When are you guys opening one in California?! You guys would make so much money here!!
I like your kel tec decal on your toolbox
America
Great install video
Thanks 👍
Wow awesome explanation and lesson on turf
Glad you liked it
I really appreciate this video. I've been thinking of turf and this has really helped out. Thanks!
Glad it was helpful! Thanks for watching
What do you recommend sealing wood prior to doing something like turf
Good video thanks partner
Going to give yall a visit in Oxford! Only a hour away!
Looks great! How does it stand up to the most extreme temperatures? My boat stays covered, but summer temps in the 110+ most days concerns me.
Great video boys.
Thank you kind sir!
Baller. I'm redoing an 82' Boston Whaler and wanted to foam the decks. 👍👍
EVA foam goes perfect for those types of boats.
Great video, very Cool!
Glad you liked it! Thanks for watching!
Thank you! Great Video!
Mike, sorry but I can’t put a tourniquet on your finger until after I get the blood up or it will stain! 😂. Nice video!
LOL... it was a lot of blood.
Sorry if this has been asked im new to watching the channel. I know you dontiny boats but van you guys also do bass boats at your illinois location
Wonderful video. Any questions people think of was answered. Good job 👏
*How hot does the Eva Foam get? Eva Foam available from us is UV Resistant and stays cool to the touch even on hot summer days. We have been on full black EVA Foam (HydroTurf) in the middle of the day in summer barefoot with no issues.
Forgot to add that little note to the video.
Yup it is great for keeping your feet cool.
I did seadek and Marine mat which is pretty much the same thing. I can tell you this , from a black foam to a white foam , the difference in surface temp can be as much as 20 degrees. However , if you go to a lighter color , stains will show up more versus darker tones. I tried to stay somewhat neutral , with light greys and light blues etc......Still hard to keep clean but on a kayak when you are overtop that surface all day and just a foot or two from it , it does make a huge difference.
Love it guys.
Thanks bud!
Ok so I see all the aluminum boats. Will this work on a fiberglass boat?
To be fully transparent, Seadeck and I assume others EVA foam decks, will deform and discolor in reflective sun light. I read the reviews after I made the mistake
It also matters how you store the boat. If you leave it outside without a cover, yeah, it probably will
As does everything......
So why invest in it when it doesn’t last? After it warps and fades you need to worry about how to get the old stuff off with the adhesive. Must be a headache!
@@2cthetruth Glued carpet is a pain to replace too.
The real solution is to use pure aluminum and have it polished to a high shine. That’ll last a while! Make sure it’s shiny like a mirror, itll tan you right up too.
When transitioning from carpet to EVA on my bass boat, will I need to address the gap in the storage compartment where the old carpet was?
Advantages vs disadvantages of eva vs carpet?
Great video on the what's the install process but not info cost or the round about prices for doing a boat.
We’ll do a follow up video on it
Id love to but its too expensive to have it switched and my carpet is in great shape still
awesome custom designs!😎👍
thank you pops
Do you already have some boat templates in your stock? Ranger Tug 29?
Can you use this one a boat dock?
Therese Park
What is the name and brand of the 3D scanner for cut outs?
🤫
I'm wanting to replace carpet on my pontoon boat. Have you ever put this EVA on a pontoon?
Yes, we recently did a giveaway on a 12’ pontoon
How do EVA foams you showed, compare to the PE foam AquaTraction uses ? AquatTraction feels much tougher and actually warranties color and adhesion.
Not really sure to be honest, haven't used it
I’m replacing the carpet in my 2004 tracker PT175 with hydro turf, so what can I do about the gaps left between the lids and deck or box edges due to the old carpet having been rolled over the edge of the lids??? Can I coat exposed aluminum with a rubberized coating to deaden noise and cover exposed aluminum??? PLEASE, AND ADVICE WOULD BE GREATLY APPRECIATED!!!
We just paint any of the gaps and edges.
So when I order a camo one the sheet you showed us is what’s gonna come if I order one?
You will get a single sheet with either adhesive or no adhesive depending on what you order
Have you guys scanned a 2001 back country ghost 16’9 before?? Just wondering
Nope, not yet
Does it stick well on fiberglass i missed it if it was said in the video
What is a rough cost for a custom deck, uninstalled? 19ft Tracker
Depends on what you want, please contact one of our locations
More expensive than carpet lol.
You guys are awesome
Thank you!
Should we paint the aluminum prior to applying the EVA Foam?
Yes
Have a 18.9 Xpress aluminum boat. It has a bed liner type stuff sprayed on the decks. I would imagine one would have to remove this coating before installing the EVA.
Yes or no?
Yes, sand it down
Are there any tricks to getting turf to adhere to wood?
Seal the wood really well with Fiberglass resin, then sand smooth with 80 grit and it will stick great.
This video was so needed for me,you completely showed what is needed and what is involved in what to order and which way to face it was another question answered 👍 thank you Ryan and the other gentleman sorry drawing a blank on his name maybe in the the future videos you could and a name off to the side so everyone gets knows each guy on the team 🤷 and job boys, thank you 👊❤️
Haha will do Ken, thank you sir!
Will this stick well on aluminum diamond plated floors?
Ever do work on any 16 ft Lund rebal adventure ss’ ?
Not yet
I paid $68 a roll and got it cheaper when I bought 3 of them 94 by 39 were the size of the rolls black white and grey camo and the grey one with the black stripes
cool
I paid 50😊
@@anonymousmc7727where?
I’m looking for a sheet of this to stick to the roof in my utv. Making a headliner for soundproofing. Would it stick to a plastic roof.
Yes it will stick to plastic. Just sand it real good first
Can this be done with a tiny fiberglass boat?
Of course
Do you have a video on how you did that completely gray boat with the slick decal that was shown at the start of the video? I really like that design. Also how long was that boat.
Yes, there is a video on this channel specifically about that boat
@@TBNationOutdoorsI can’t seem to find the video about it. Could you tell me the name of the video.
I’m not incredibly far from the Pekin location. I have an Alweld that has almost been completed and can’t decide between carpet and this stuff… how is this on compartment lid noise? Will it be louder shutting lids than carpet would be?
Do you have tips about getting carpet off? Tracker boat carpet, probably not stuck on all that great to begin with… heat gun? Thanks in advance
burn the boat. Haha, most of the time we use an angle grinder with a sanding disk. Its messy, but gets the job done
How well does this take on a wood deck ?
Thanks
Just fine. We actually have videos on how to install EVA foam on wood decks
Can I use a commercial rubberized coating to “paint” the exposed surfaces the turf doesn’t cover???
Not sure about rubber. we usually use regular paint.
I wonder if this would work on a 2002 Mainship 390?
It will work on any boat
What does it's do in the pouring rain does it turn into a sponge
Nope, doesn’t hold the water like carpet. Still has grip
Have you guys by chance scanned a 2014 xpress h18 before? Looking for a kit
No we have not, and even if we did, you still need to get it scanned. No two boats are exactly the same. We have made that mistake before and nothing fit right from one boat to the next.
What is the approximate cost to do a 16'/17' jon boat?
Dear, I am a seller of EVA anti slip pads and I can provide you with a quote
don't think i would rather clean my seadek on my duck boat with anything other then a pressure washer. teak layout foam is alittle sketchier but ive never messed my bass rig floor up using one.
not a full powered pressure washer, one of those cheap electric ones works good.
Jaskolski Fall
How does it hold up to dogs?and would this stick to diamond plate?
haven't seen an issue with dogs, yet . Cats will scratch it up. no to diamond plate
Can this go on checker plate aluminium?
Not easily
Can this be put over diamond plate aluminum decks?
no, get the diamond plate flat
Do you work with a Transporter from Dallas/Rowlett Tx to where you are in Oxford Ga?
We can. Please contact us
Question, do you find the gaps around hatches being a problem on boats that use to have carpet and now are EVA foam?
I’ll definitely be ordering from you all on my DIY project. Thank you for all the great info.
They just don't look the best
Brianne Lodge
Have you ever thought about opening up a t b nation in alaska
if we had a connection out there, then yes
So how much $$ did the seadeck set you back ?
Which boat? Depends on the boat size and designs you want
What would you use if you got the hydro mat without adhesive. Made that mistake a couple days ago when I ordered. I assume I can’t change order now?
contact cement
What’s the price difference of getting a custom measured kit and just sheets and cutting it yourself?
If you DIY the sheeting you will save money. If your paying someone to hand lay the sheets, routed/scanned will be same or cheaper
@@TBNationOutdoors ok thanks for the info.
Brother do you have EVA for kayak Hobie Pro angler P14
Not a scan, but if we can get a scan we can make it happen
New to this product. Can you use it in fiberglass boats as well. If so should the surface be smooth. In my 95 ranger the floor area is kind of bumpy. Idea's
Yes, I think it was primarilly meant for glass boats to begin with. It started out on jet skies. It will also go into cars.
Did you try this product? Wondered what you thought of it.
Does this dtick to fiberglass boat?
Yes
What boats are in the thumbnail?
How long does it take for install
Cnc stuff takes about 45 mins
Hydrofurf was the first
Mose Shore
How hot does it get in 100* weather ?
Not 100% sure, but can test and let you know
How does this hold up for salt water sailing?
I don't know why it wouldn't, I've seen it on salt water rigs before
@@TBNationOutdoors my question was HOW does it hold up to salt water sailing. Salt water is much more corrosive than fresh water. Breaking down the material and adhesive at a much faster rate. I’m wondering how long it would last in the ocean. A few years, a season, a few months, etc..
Reinger Cliff
Would you be able to lay Eva foam over a flat vinyl pre existing floor? I’m doing a pontoon and it has that already. Curious how to begin to redo it.
No, I would pull the vinyl up first, paint the wood and put it over the wood.
Has anyone replaced the carpet on their bass boat with EVA foam? Interested in learning about your experience
Have to remove all the carpet and carpet glue. You will have larger gaps between the deck and lids, unless you get new lids made
Silas Island
Has anyone in the comment section used this in a ten foot bass raider or lond prowler? How mant sheets do you think id need for that? I think its basicall a 10x4 ft boat
2 sheets will do a pond prowler
@@TBNationOutdoors thanks for the reply! Much appreciated
Cronin Prairie
Waino Point
If you do happen to accidentally let blood sit on this shaving cream even the cheap stuff will make blood vanish and leave a cleaned spot where it used to be just a free tip
Very good tip, need to give that a try
It works on regular carpet so very likely it will work on boat carpet or foam as well just dab don't scrub
Rice Plaza
Kohler Shoal
Beahan Brook
Richie Lights
Hyatt Gardens
Carli Plaza
So we not going to talk about that catch? That catch was so smooth I thought it was a video pause/play.
We only practiced it 972 times to get one good shot LOL
Feest Streets
Sam Island
8:05 All-American
*screams like an eagle