just a side note: although listed for the smaller tractors with up to a 300 loader, it will fit just dandy on the 400 loader. I have a 4000 series tractor with 400x loader. love it.
I wish my dealer had given me the option for this grapple, I got stuck with an av20h, it’s a grapple so it’s better then no grapple, but this F would’ve been a much better option. My av20h has a tiny opening and in the grapple market I could name atleast 10 better ones than my frontier grapple. I love my Deere products but the grapple segment needs big time overhaul to stay competitive with other brands like artilian and Everything attachments’ wicked grapples. I even had an E for a short amount of time on my 4044m, but it’s 800lbs, and HUGE! What a waste of loader lift capacity, and it is his ridiculously large. This F model seems to be a little better and would’ve fit me right.
Will this grapple setup pick up any size log within reason, small logs, as well as short stubby firewood type logs, besides any and all type of debris??? I would love to have a grapple set up for my 1025R 🚜 & H120 front loader
Thanks for the question, Rodney. Your local dealer would be a great resource to work with to find the best attachments and implements suited to your needs. If needed, you can find your local dealer at dealerlocator.deere.com.
Thanks for the question. We recommend contacting your local dealer for assistance locating and ordering parts for your unit. If needed, you can find your local dealer at Deere.com/Dealer.
Terry McGillicuddy, your local John Deere dealer is your best resource for technical questions like this one. You can find your closest dealer at bit.ly/2P3MFu8.
Hi LeRoy, the 2032R comes equipped with a standard Mid-Mount Selective Control Valve. Two additional kits can be added as dealer installed options including the Dual Rear SCV and the Power Beyond Kit. At this time there is not a 3rd Function Kit compatible with the 2032R. We recommend you stay in contact with your local dealer for future offerings. If needed you can find their contact information here: bit.ly/3fq5fF1.
First, what's the part numbers for the electronic-controlled 3rd SCV to drive the grapple and the actual grapple itself? Second, why don't you add that to the descriptions of your videos. It would be very helpful if Deere had a small section in the description that said: Featuring the following Optional Accessories: AV20F Grapple - John Deere Part Number XYZ123 Electronic 3rd Function SCV - John Deere Part Number ABC123
Thanks for the question! Our Customer Contact Center team can help you find this information. You can find their contact information at the bottom of the page at Deere.com/ContactUs.
hi I was wondering if you could give me the part number for the third function kit for the joystick and loader lines I cant seem to find them on parts advisor
Zachary, thanks for reaching out. We recommend contacting your local dealer for assistance locating and ordering parts for your unit. If needed, you can find your local dealer here: bit.ly/2XQNh5R.
Shawn, thanks for the question. Your local John Deere dealer is your best resource for technical questions like this one. You can find your closest dealer here: bit.ly/2JXfqlg.
Thanks for reaching out, Jaime. If you haven't already you may want to take a look through your Operator's Manual. Many Operator's Manuals are available online, so you may be able to access the manual for your model at techpubs.deere.com. If needed, your local dealer would be a great resource to work with to find the best solution for your needs. You can find your local dealer at dealerlocator.deere.com.
I know this post is a year old but anyone connecting hydraulic couplers should first lower all attachments and neutralize the controls all directions to unload the system. be sure to shut down the engine too.
You know what I realized when you have $1,000 implement or a $400 implement and you're trying to make it sound like it's a $4,000 implement people don't like it and they're very negative to it I understand all y'all talk about are features features and features and that's why when I was going to buy my last John Deere I walked out and just left cuz the salesman would never tell me the price I asked him three times and on the third time I just left and went and bought I'm not going to say but the competitive brand because that's what John Deere is today all they do is talk about features features features there's absolutely like no value actually there though cuz that's the whole point if you actually look at what they really do versus what they cost think about it that's why I left
I own one of the first AV20F grapples, followed by receiving the upgraded square bar... when your ready to make a much better video for selling point, give me a call. No disrespect but this video is old and doesn't do the AV20F and justice IMO.
Frontier is never made one implement and their entire years in business. We really just can't trust John Deere anymore not just this but with everything from the right to repair
just a side note: although listed for the smaller tractors with up to a 300 loader, it will fit just dandy on the 400 loader.
I have a 4000 series tractor with 400x loader. love it.
I wish my dealer had given me the option for this grapple, I got stuck with an av20h, it’s a grapple so it’s better then no grapple, but this F would’ve been a much better option.
My av20h has a tiny opening and in the grapple market I could name atleast 10 better ones than my frontier grapple.
I love my Deere products but the grapple segment needs big time overhaul to stay competitive with other brands like artilian and Everything attachments’ wicked grapples.
I even had an E for a short amount of time on my 4044m, but it’s 800lbs, and HUGE! What a waste of loader lift capacity, and it is his ridiculously large. This F model seems to be a little better and would’ve fit me right.
Did someone say #WickedGrapple? #DemandTheBest
EverythingAttachment is that you travis lol
Hahahaha @@AndyGarcia-ch1ci My radar stays on. If the word "Grapple"(especially "Wicked Grapple") is mentioned anywhere, I'm on it!
Will this grapple setup pick up any size log within reason, small logs, as well as short stubby firewood type logs, besides any and all type of debris??? I would love to have a grapple set up for my 1025R 🚜 & H120 front loader
Thanks for the question, Rodney. Your local dealer would be a great resource to work with to find the best attachments and implements suited to your needs. If needed, you can find your local dealer at dealerlocator.deere.com.
@@JohnDeere Thankya for the post back. Yes we have a local J. D. Dealership here bout 6-7 miles up the road. . . . .thankya ya'll for the video
@@truckerray7533He dodged the question and routed to you a dealer... not a big help.
I have a JohnDeer 3025E am looking for the 3rd function part number could you help me on this
Thanks for the question. We recommend contacting your local dealer for assistance locating and ordering parts for your unit. If needed, you can find your local dealer at Deere.com/Dealer.
Do you guys know if I can get a third function for my 3033R cab model?
Terry McGillicuddy, your local John Deere dealer is your best resource for technical questions like this one. You can find your closest dealer at bit.ly/2P3MFu8.
I am awaiting delivery of a 2032r and requested 3rd function hook-up included and was told the kit isn't available from the dealer
Hi LeRoy, the 2032R comes equipped with a standard Mid-Mount Selective Control Valve. Two additional kits can be added as dealer installed options including the Dual Rear SCV and the Power Beyond Kit. At this time there is not a 3rd Function Kit compatible with the 2032R. We recommend you stay in contact with your local dealer for future offerings. If needed you can find their contact information here: bit.ly/3fq5fF1.
First, what's the part numbers for the electronic-controlled 3rd SCV to drive the grapple and the actual grapple itself? Second, why don't you add that to the descriptions of your videos. It would be very helpful if Deere had a small section in the description that said:
Featuring the following Optional Accessories:
AV20F Grapple - John Deere Part Number XYZ123
Electronic 3rd Function SCV - John Deere Part Number ABC123
What's the part number for the 3d function kit. My dealer said they didn't have a kit for this tractor. Thanks.
Thanks for the question! Our Customer Contact Center team can help you find this information. You can find their contact information at the bottom of the page at Deere.com/ContactUs.
For the 1 series it's BLV11143
For the 2025R the kit is BXX10375
hi I was wondering if you could give me the part number for the third function kit for the joystick and loader lines I cant seem to find them on parts advisor
Zachary, thanks for reaching out. We recommend contacting your local dealer for assistance locating and ordering parts for your unit. If needed, you can find your local dealer here: bit.ly/2XQNh5R.
That link doesn’t show the third function kit. What’s the jd part number for the kit?
The kit is part # BXX10375 for the 2025R
Will this go on a 1025r with the h 120 loader
Shawn, thanks for the question. Your local John Deere dealer is your best resource for technical questions like this one. You can find your closest dealer here: bit.ly/2JXfqlg.
I have problem to connect the hydraulic. I don’t know why.
Thanks for reaching out, Jaime. If you haven't already you may want to take a look through your Operator's Manual. Many Operator's Manuals are available online, so you may be able to access the manual for your model at techpubs.deere.com. If needed, your local dealer would be a great resource to work with to find the best solution for your needs. You can find your local dealer at dealerlocator.deere.com.
I know this post is a year old but anyone connecting hydraulic couplers should first lower all attachments and neutralize the controls all directions to unload the system. be sure to shut down the engine too.
Would you like a pic of my AV20F grapple ???
Yeah!!!
@@gidzey4783 can't seem to upload the pic on here...
120r loader
You know what I realized when you have $1,000 implement or a $400 implement and you're trying to make it sound like it's a $4,000 implement people don't like it and they're very negative to it I understand all y'all talk about are features features and features and that's why when I was going to buy my last John Deere I walked out and just left cuz the salesman would never tell me the price I asked him three times and on the third time I just left and went and bought I'm not going to say but the competitive brand because that's what John Deere is today all they do is talk about features features features there's absolutely like no value actually there though cuz that's the whole point if you actually look at what they really do versus what they cost think about it that's why I left
Yet here you are, watching JD videos. 🤦♂️
Second
I own one of the first AV20F grapples, followed by receiving the upgraded square bar... when your ready to make a much better video for selling point, give me a call. No disrespect but this video is old and doesn't do the AV20F and justice IMO.
Frontier is never made one implement and their entire years in business. We really just can't trust John Deere anymore not just this but with everything from the right to repair
First
waiting on your 3rd function diverter valve system too?