The lack of support docs and videos for this overpriced vacuum is really disappointing. Hoping to see a better warranty and support personnel that understand and speak English when you select Contact for USA. Also hoping to see MAJOR improvements to the software and app in the very near future.
I think the machine itself is great, but the APP is terrible. It's not at all intuitive. What is needed is a video which SLOWLY goes through the different steps needed to operate the machine.
@@Sandy-tv7uu And you forever have to go back to the home and load it again, or it freezes, and let's not talk about being forced to give it permission to send your video footage to China...
Same! Totally frustrating experience. Kept getting 'please check the driving wheel' error msg, which i discovered could mean anything from the dust bin is full, the sensors are dirty, or the driving wheel does actually fluff behind it. It also seemed to go wonky and stop if it had to continually navigate tough transitions between surfaces - kind of like it got overheated and needed the motor to cool down.
@@sosac6646 I moved the mats it was having trouble with (they were thick coir mats that had a very nubbly texture), lifted all of the dining room chairs onto the table, lifted the breakfast bar stools onto the bar and shut the doors into the carpeted bedrooms. I then set it to map and it mapped my main living, dining, study and kitchen with no further problems. Once it has the area mapped, if its running and 'discovers' a new area, it adds to the map. I usually run the cleaning as custom now and cut out the area that doesn't include the coir mats.
@@bflya64 hi, still trying to figure out the app. May I please ask you how you set it up to map? I have not seen this in the app.I’ve run it twice and no map yet. Thanks . EDIT: has now mapped, but continually has problems staying connected to WiFi, so needs to be reset up to WiFi thereby requiring it to make a new map each time. There is nothing wrong with my WiFi and it is only the DEEBOT that has this problem. Wifi is 2.4 GHz as required. Frustrating.
I purchased 950. While the company manufacturers decent products it is lagging behind the software. If you go to app stores lot of folks complained about below average software. I personally experienced lot of glitches in their software. Without a excellent software any robust hardware will look bad. I hope the company will pay attention to correct the issues.
My 901 was replaced under warranty but the replacement 937 was not functional as the battery pack was dead (died halfway through the cycle and would go to charge). After the difficult customer service, they replaced that robot with a new defective unit 937… After I tried to receive customer service for the defective unit I currently have, they told me I was no longer under warranty… I was only outside of my warranty because they take so long to communicate, and they sent me two defective units! I communicated my frustration to customer service, to which they have not been helpful… I had suggested this product promoted it even freely to coworkers, and now I couldn’t even get my robot to make one complete cycle. The robot will sometimes make a complete pass, it is so sporadic on if it will be successful or not… Sometimes it will start and do fine and halfway through the cycle it'll start spinning in circles and hit things constantly. Nothing is tangled or stuck including the bumper, and it is mostly on hardwood floors but it also messes up on carpet. Also it does not go in the horizontal lines as my 901 had, rather it has an isometric pattern… It’s very inefficient for my floor plan. Any help or suggestions?
Hi, can you tell us when does the T8 Will be available in Europe (and specifically in France)? And what about the pro version with the mechanised mop and self extract bin ? Thank you
This app is terribly designed. Trying to set up custom maps and boundaries and there’s no button to add, edit, or delete areas. Between that and the fact that the Unit can never manage to get up onto its charging dock/emptying system without help and it makes it feel like it’s more work than vacuuming ourselves.
Only thing holding me back from buying and many that I know is the vibrating mop. I hope they hurry up because once the S6 vmax is released then they'll eat a good chunk of the market.
@@Hivydar It was the AIVI T8 it has a vibrating mop. Another also came from ECOVACS which supposedly is way better than the AIVI t8 at recognizing stuff.
Hallo. Ich habe folgendes Problem. Ich habe einen Ecovacs T8 Aivi... Ich habe eine Wohnung mit 2 Geschossen...Diese Beiden sind in der Raumteilung indentisch. Also in der 1.Etage und 2.Etage sind die Räume gleich. Die erste Karte war ja noch leicht zu erstellen. Nun kann ich leider keine 2.Karte estellen. Was nun? Gibt es einen Tipp? Bitte um schnelle Rückmeldung. Klaus aus Berlin
There is another model Ozmo T8 AIVI Model D-AS01 for $249 at Walt-Mart, is this the same or different Manufacturer? The Brand is ECOVACS ROBOTICS INC, I would like more info on this please. Thank you
Ecovac's is right. If you push directly down on the top of the areas that snap into the water tank it will pop off. This is pretty jarring though and definitely feels wrong until it feels right hahaha.
@@ECOVACSRobotics I cannot believe you'd give such a smarta** answer to a legitimate question! Why didn't YOU explain this either on your RUclips video or in the manuals? A little customer support would be nice for such an overpriced mop-vac.
This app is beyond confusing. I've done the same thing, mapped the house using auto. It shows me the damn map. But I go to area clean and it says need to map the house. What the hell does that mean? For the cost of this thing, having such a shitty app is absurd.
Anyone looking to buy , dont buy. It is difficult to figure out each step. Simple things like deleting or resetting virtual boundaries. It takes hours to set this up and dismantle etc. if you ate trying to save time, run…
DO NOT BUY THIS PRODUCT. Anti drop sensors keep this unit from doing its job. You will have to reset anti drop sensors 15 to 20 times in a week. You must be supervising this unit all the time, otherwise it will not do the job as anti drop sensors needs a lot of attention. There is no DISABLE OPTION feature in the app to disable the ANTI DROP sensors, and many people have been complaining about that issue since 2019. So far, NO UPDATES on the app. Another issue, the ECOVACS Deebot T8 AIVI Robot reset maps 2 to 4 times in a month, which is a headache. STAY WAY from ECOVACS products because it’s not worth it and buy a better well know brand on the market. I think this vacuum is like a test version to find out problems where people can complain.
The lack of support docs and videos for this overpriced vacuum is really disappointing. Hoping to see a better warranty and support personnel that understand and speak English when you select Contact for USA. Also hoping to see MAJOR improvements to the software and app in the very near future.
I’m fed up to. For 3 months trying to understand how the App works. They have no tutorials for the app!!!!!!!!!!!
I think the machine itself is great, but the APP is terrible. It's not at all intuitive. What is needed is a video which SLOWLY goes through the different steps needed to operate the machine.
It's also ridiculously slow
I agree 100% about the worst app i have ever seen
@@Sandy-tv7uu And you forever have to go back to the home and load it again, or it freezes, and let's not talk about being forced to give it permission to send your video footage to China...
I logged almost about 8 hours of cleaning before I was able to a map. I finally got it this weekend.
Same! Totally frustrating experience. Kept getting 'please check the driving wheel' error msg, which i discovered could mean anything from the dust bin is full, the sensors are dirty, or the driving wheel does actually fluff behind it. It also seemed to go wonky and stop if it had to continually navigate tough transitions between surfaces - kind of like it got overheated and needed the motor to cool down.
How did you get it to work????
@@sosac6646 I moved the mats it was having trouble with (they were thick coir mats that had a very nubbly texture), lifted all of the dining room chairs onto the table, lifted the breakfast bar stools onto the bar and shut the doors into the carpeted bedrooms. I then set it to map and it mapped my main living, dining, study and kitchen with no further problems.
Once it has the area mapped, if its running and 'discovers' a new area, it adds to the map. I usually run the cleaning as custom now and cut out the area that doesn't include the coir mats.
@@bflya64 hi, still trying to figure out the app. May I please ask you how you set it up to map? I have not seen this in the app.I’ve run it twice and no map yet. Thanks .
EDIT: has now mapped, but continually has problems staying connected to WiFi, so needs to be reset up to WiFi thereby requiring it to make a new map each time. There is nothing wrong with my WiFi and it is only the DEEBOT that has this problem. Wifi is 2.4 GHz as required. Frustrating.
@@DD-lh5py mm
I purchased 950.
While the company manufacturers decent products it is lagging behind the software. If you go to app stores lot of folks complained about below average software.
I personally experienced lot of glitches in their software.
Without a excellent software any robust hardware will look bad.
I hope the company will pay attention to correct the issues.
Still trying to figure out how to get it to map my bedroom on the 2nd floor
How do you make a mapping
My 901 was replaced under warranty but the replacement 937 was not functional as the battery pack was dead (died halfway through the cycle and would go to charge). After the difficult customer service, they replaced that robot with a new defective unit 937… After I tried to receive customer service for the defective unit I currently have, they told me I was no longer under warranty… I was only outside of my warranty because they take so long to communicate, and they sent me two defective units! I communicated my frustration to customer service, to which they have not been helpful… I had suggested this product promoted it even freely to coworkers, and now I couldn’t even get my robot to make one complete cycle.
The robot will sometimes make a complete pass, it is so sporadic on if it will be successful or not… Sometimes it will start and do fine and halfway through the cycle it'll start spinning in circles and hit things constantly. Nothing is tangled or stuck including the bumper, and it is mostly on hardwood floors but it also messes up on carpet. Also it does not go in the horizontal lines as my 901 had, rather it has an isometric pattern… It’s very inefficient for my floor plan. Any help or suggestions?
Hi, can you tell us when does the T8 Will be available in Europe (and specifically in France)?
And what about the pro version with the mechanised mop and self extract bin ?
Thank you
This app is terribly designed. Trying to set up custom maps and boundaries and there’s no button to add, edit, or delete areas. Between that and the fact that the Unit can never manage to get up onto its charging dock/emptying system without help and it makes it feel like it’s more work than vacuuming ourselves.
Yeh, my T8 app is crap. Finally made 2 maps, but can't start when picking the 2nd map
Can it vacuum and mop at the same time?
Yes
Only thing holding me back from buying and many that I know is the vibrating mop. I hope they hurry up because once the S6 vmax is released then they'll eat a good chunk of the market.
Wait there is another robot vac/mop in one? Which one?
@@Hivydar It was the AIVI T8 it has a vibrating mop. Another also came from ECOVACS which supposedly is way better than the AIVI t8 at recognizing stuff.
This vid is helpful and different from the manuals.
Hallo.
Ich habe folgendes Problem.
Ich habe einen Ecovacs T8 Aivi...
Ich habe eine Wohnung mit 2 Geschossen...Diese Beiden sind in der Raumteilung indentisch.
Also in der 1.Etage und 2.Etage sind die Räume gleich.
Die erste Karte war ja noch leicht zu erstellen.
Nun kann ich leider keine 2.Karte estellen.
Was nun? Gibt es einen Tipp?
Bitte um schnelle Rückmeldung.
Klaus
aus Berlin
There is another model Ozmo T8 AIVI Model D-AS01 for $249 at Walt-Mart, is this the same or different Manufacturer? The Brand is ECOVACS ROBOTICS INC, I would like more info on this please. Thank you
I keep losing my saved map. It goes to map2 and I can’t just put it back to map1.
How do you connect it to Amazon Alexa or Google?
I am havinh trouble with saving the map ... please help
What about the T9???????
Cada cierta cantidad de tiempo el mapa se desconfigura y debo eliminarlo y volver a generarlo, a que se debe esto?
"Adjust Water Fow Level" :(
I am unable to remove the cleaning plate from the mopping unit, pls help.
Use your power, come on you can do it
Ecovac's is right. If you push directly down on the top of the areas that snap into the water tank it will pop off. This is pretty jarring though and definitely feels wrong until it feels right hahaha.
@@ECOVACSRobotics HORRIBLE DESIGN. BROKE MY THUMB NAILS.
@@ECOVACSRobotics I cannot believe you'd give such a smarta** answer to a legitimate question! Why didn't YOU explain this either on your RUclips video or in the manuals? A little customer support would be nice for such an overpriced mop-vac.
@@ECOVACSRobotics Are you speaking to a consumer or a super hero?
Can we set up deebot without wifi?
NO, you must accept that it will video you and your family, sending the video to China.
I vacuum went through whole twice and still hasn’t created a map. What am I doing wrong?
This app is beyond confusing. I've done the same thing, mapped the house using auto. It shows me the damn map. But I go to area clean and it says need to map the house. What the hell does that mean? For the cost of this thing, having such a shitty app is absurd.
@@Newms118 Go into the app and make sure the Advance Mode is set to ON.
@@keithvaughn1486 I did that and when it went to recharge, it never came back to continue cleaning. The continue cleaning was on
Video stored in their cloud only and you can't watch or delete videos. So creepy. 😒
App it's something!!!!!!
Anyone looking to buy , dont buy. It is difficult to figure out each step. Simple things like deleting or resetting virtual boundaries. It takes hours to set this up and dismantle etc. if you ate trying to save time, run…
The app is attroctious.
wait 1 min
DO NOT BUY THIS PRODUCT. Anti drop sensors keep this unit from doing its job. You will have to reset anti drop sensors 15 to 20 times in a week. You must be supervising this unit all the time, otherwise it will not do the job as anti drop sensors needs a lot of attention. There is no DISABLE OPTION feature in the app to disable the ANTI DROP sensors, and many people have been complaining about that issue since 2019. So far, NO UPDATES on the app. Another issue, the ECOVACS Deebot T8 AIVI Robot reset maps 2 to 4 times in a month, which is a headache. STAY WAY from ECOVACS products because it’s not worth it and buy a better well know brand on the market. I think this vacuum is like a test version to find out problems where people can complain.
Crap app. I'm sending myT8 back to Amazon
Did not show how to get to virtual boundary section from home screen. Poor video
too quick!
The video is super useless...