First you can turn the png/jpg file into a svg using a file conversion then you can directly extrude without tracing the image. But in futon you have to select import svg. Secondly you can print the pieces on there backs so you don’t have to use as much plastic and it will save time
I love your vids!!! I watch them every day before I go to school. If you had a product on Kickstarter, I would totally back it.👍P.S. this looks like a Rubik's cube 🐱💻
Hi Kenneth, I want to introduce my 3 yo daughter in the world of cubes, what do you think is the best first cube for her? I have some options, normal 3x3, z cube sandwich 3x3, normal 2x2 and Rubik's junior bear 1x2x3
There shouldn't be 5 trackers, I'll have to look into that. But the camera permission is only asked if we need to verify your identity and uploaded documents or if you want to deposit a check.
RedKB Ah, ok. I may be wrong about the trackers, as ɛxodus only searches for evidence of trackers. It found: Adjust Braze Google Analytics Google CrashLytics Localytics
@@m1lkweed Ah, adjust is for attribution for things like our referral program. Braze is for push notifications for things like when your account is verified. GA is for understanding the usage of our users, what features users like and use and which they don't. Crahslytics is so we can know if something is crashing, and localytics we used to use but should be out now. I'll have to double check that it's completely out.
Why didn't you print it upside down without support? Then you only need a small chamfer on top of the small ridge that hides the cube in order to print it
@@redkb Ooh, that's a bummer! Maybe have a look at those matte magnetic build surfaces, they leave a pretty nice bottom layer finish. Furthermore they are flatter than tape and you can spray them with 3D lac for a more consistent adhesion without worrying that you might not get your print off
you can do all the fillets in one go. even on multiple bodies. printing upside down would have been smarter, unless your build plate is leveled badly and it doesn`t look nice on the bottom. in extrusion you can choose symmetrical in the menu, but i think you used that on a later part already. great video and good to have you in the 3d printing community :)
I would have tried to do the fillets all at once but they were very hard to select. I was turning off the visibility of the other bodies so I could select them then I was doing all of one piece at a time. Any trick for that? For printing it was important that the outside of the puzzle looked best so that is why I had it print in that orientation. The blue tape would have left a prominent line.
If you hold the left mouse button you can select stuff through objects. I guess I would try to enter a very high number for the fillet temporarily so it's easier to select the other edges. Not the best workaround but it could work. Setting the select filter to edges only is also helpful. Edit: only have 1 body visible at a time, select it's edge, hide it , move to the next also looking straigt down at the intersection and left click drag ( so it does the orange square selection, dont know how to describe ). make the square as small as possible, zooming can help if there is a lot going on in that spot
How to get a raise 101
Jee Jee can’t like because it’s at 101 likes
It’s at 102 now
Darn u people
What happened why don’t you upload?
My suggestion for next would be to redo the Acorns 2x2, but as an actual 3D acorn, not flat.
Use the revolve tool on half the logo without the stem
Rip redKB’s channel
ikr he lost subbs
Videos every weekend 🧐
Bro where are you :( we miss you
Luis Medina bro he was the one who got me into cubing
Me too
😓😭😭😭
can you make a new video?
Wait...! I didn’t know you worked for acorns! That’s awesome!!!
I noticed that RedKB has been gone for 3 months.
Me too
Well, that has now turned into 4.
@@Inspirator_AG112 and nothing on any of his social media accounts. F
ANIMATION GUY 112 yep
@@NotBroihon i think he died
Where did you go! You cant leave us! No video in six months! I am dying!
you should make a video of the top 10 cubes a beginner cuber should own!
yay i got noticed!
Rip redkb
Why wont you upload
Why is red so inactive lately?
As an Acorns user, I would love this!
I also can't wait to get my Acorns card!
Been waiting for a new upload for 3 months now 😢😢😢😭
I wish luck and happiness to your family
You should really do a tutorial about the Vladi's seed. I wasn't able to find a turorial in english and I can't solve it.
Kenneth you’re best at cubes
I have been cubing for 3 years and it was you who encouraged me to start a huge collection of my own. Good job!!
Nice. I have a panda-shaped and a tiger-shaped 2x2x2 cubes from Yuxin. They also look crazy when scrambled. But that's a very nice acorn. :)
Acorns swag goodies incoming :D
Good job and great work
Where u been bro
Well done
First you can turn the png/jpg file into a svg using a file conversion then you can directly extrude without tracing the image. But in futon you have to select import svg. Secondly you can print the pieces on there backs so you don’t have to use as much plastic and it will save time
I love your vids!!! I watch them every day before I go to school. If you had a product on Kickstarter, I would totally back it.👍P.S. this looks like a Rubik's cube 🐱💻
Why not try solving a Braille Rubix cube while blindfolded
did he leave again :(
Um... where are you? You haven't uploaded in 5 MONTHS!
Your videos are amazing!
Why did you print it all at once with supports? Why not top half flipped over as a seperate print? :/
The only think I want for my birthday is to see redkb in real life
I love your 3d printing 'adventure'!!
Awesome, I’m excited to see this in person!
Three words:
Clear talk mastery
The Rubik's cubed logo
Hi Kenneth, I want to introduce my 3 yo daughter in the world of cubes, what do you think is the best first cube for her? I have some options, normal 3x3, z cube sandwich 3x3, normal 2x2 and Rubik's junior bear 1x2x3
Hi, Have you made tutorial video for Burr Cube? If yes can you share link and if not can you make one? Thank you.
Why you no upload
Amazing work as always!!!
Me ha dado una idea! gracias!
Congratulations on your first 3d printed custom made cube, looking forward to see your future 3d printed cube 😊
LAmotionPics he made a yoda
you're back!
whats so good about his back? lol XD
*you're
his back!
fixed
I just checked acorns on the playstore.
Why do you need so many trackers for analytics (5 according to ɛxodus)?
Why is the camera needed?
There shouldn't be 5 trackers, I'll have to look into that. But the camera permission is only asked if we need to verify your identity and uploaded documents or if you want to deposit a check.
RedKB Ah, ok. I may be wrong about the trackers, as ɛxodus only searches for evidence of trackers. It found:
Adjust
Braze
Google Analytics
Google CrashLytics
Localytics
@@m1lkweed Ah, adjust is for attribution for things like our referral program. Braze is for push notifications for things like when your account is verified. GA is for understanding the usage of our users, what features users like and use and which they don't. Crahslytics is so we can know if something is crashing, and localytics we used to use but should be out now. I'll have to double check that it's completely out.
Miss you bud
Why didn't you print it upside down without support? Then you only need a small chamfer on top of the small ridge that hides the cube in order to print it
I thought about that but my bottom layer doesn't usually come out as nice as my top layer. And that was the most important layer to look nice.
@@redkb Ooh, that's a bummer! Maybe have a look at those matte magnetic build surfaces, they leave a pretty nice bottom layer finish. Furthermore they are flatter than tape and you can spray them with 3D lac for a more consistent adhesion without worrying that you might not get your print off
Love your videos!! Keep up the good work!
That is very cool!
It's been a while to see you make something.
This is super cool!
you can do all the fillets in one go. even on multiple bodies.
printing upside down would have been smarter, unless your build plate is leveled badly and it doesn`t look nice on the bottom.
in extrusion you can choose symmetrical in the menu, but i think you used that on a later part already.
great video and good to have you in the 3d printing community :)
I would have tried to do the fillets all at once but they were very hard to select. I was turning off the visibility of the other bodies so I could select them then I was doing all of one piece at a time. Any trick for that?
For printing it was important that the outside of the puzzle looked best so that is why I had it print in that orientation. The blue tape would have left a prominent line.
If you hold the left mouse button you can select stuff through objects. I guess I would try to enter a very high number for the fillet temporarily so it's easier to select the other edges. Not the best workaround but it could work. Setting the select filter to edges only is also helpful.
Edit: only have 1 body visible at a time, select it's edge, hide it , move to the next
also looking straigt down at the intersection and left click drag ( so it does the orange square selection, dont know how to describe ). make the square as small as possible, zooming can help if there is a lot going on in that spot
Hey! I have a question, what is the void cube? Is it a 3x3 shape mod or something else?
You should do a tutorial on how you solve the skewb xtreme
"Videos every weekend"
I miss your videos.
Acorns looks cool
Your voice sounds so different now lol
How to solve the z bandage cube c ?
It is more difficult than the regular bandage cube.
Why is he not posting anymore
Its just RJ it's an oof
new video soon?
Is this an ad for your app?
What red chrome cube (4th from the right side) is it?
ok what happened to Kenneth's channel....
Did you quit RUclips or something
Please show us your 2019 puzzle collection.
Make it into a video like you did in March 2016.
It has been 6 months...
Are you gone for good? :(
why didnt u upload vids for 6 months....?
NeonFlames1Gaming he works for a company of course he can’t upload some times
@@tyleehumphrey bro but still like 6 MONTHS are big
Try the 4D cube online
Make one of these but modded for a 4x4
Alvin and the chipmunks are jealous
Lmao
You should turn a grass minecraft block into a cube :D
Do
You know cfop
i just came from a vid in that he shows a touch rubiks cube (published 2009)
You should make a smash bros 2x2 cube
Hey red kB!! any tips for improving the speed of F2L. I love your channel so muck! Keep it up. And thanks if you responded
He doesn't use CFOP lol
Haha rip
Did Kenneth die
What happened
where is he
With that hole in the center, did you shell that? Or what feature did you use?
I used combine and cut instead of join.
Oh cool thanks man! Good job as well 👍
7:29 you alvin the chipmunk's voice
should've been a 2x2x1 red! would be a bit more marketable :>
I was thinking about that but wanted it more challenging to solve.
If you printed it upside down, there would have been much less support needed.
Was this an advertisement
You should 3D print a rubik's cube that you can then put a rubik's cube inside to make a rubik's cube.
U should make the 0x0x0
close your eyes, there you go
Hi oh yeah
Where is the squirrel?
Toch cube 😏
What if this was sold to the smartest squirrels on earth
Stop rushing him to make videos, he literally said he has a job
youtube logo
Oh my God I have wanted for a month
Second
*Scrat wants to know your location*
Themaoisha te extraño
IM AFRAID THAT THIS WOULD BE AN ABANDONED CHANNEL
Been here since 2009
Seen the commercial