great work man, I have the liner can't wait to use it. I was wondering why you used 3 different colors colors for the stencil; maybe to make it last longer? Seems very interesting. And I was wondering if you go above the 6-8 recommened volts? I have a faster hand speed but I'm afraid of burning it out
Thanks man 🙏🏼 I start to sketch with a light color and then i make adjustments with some darker colors. 👌🏼 No defininetly not above. but it depends on handspeed
thanks for tellin me about these markers bro theyre awesome, on sale at michaels right now. So I'm about to use my wand liner on myself for the first time; the pain from a 3.5 mm stroke doesnt bug me, but is this 5.0 mm stroke as painful as people say? I've heard mixed things.
Hey just wondering after you use those markers for the stencil. Do you throw them away after or do you save them for other tattoos? I always wondered if you could save your markers I just want professional advice that way I can probably save a few bucks
Davet Abadi I I always use a RL 5 .035 for small script. A RL 3 liner 3an give you a bit more Wobly lines. I use the RL 3 if I have to sculpt a letter a little bit Good Luck👍🏻
I want so bad to try this wand liner, I am currently using spektra xion 3.7 but it is not my favorite machine for linning...I bet this is so good with that punch...an stroke of 5? damn!
I use xion too, its best for fine line and shading and it is for a slower hand speed, longer session. The xion its a very good machine but only if you have patience. If you want something too speed up, try the dankubin, its expensive but its the best for lining. It has a lot of similar ones on the market, and cheaper, from other brands like VladBlad or Anvil. Other types are pens like wand liner or just coils.
So ive seen different Artist while doing script draw it out as you did and go over it a few times with different colors, does that hold for a good stencil? Or what would be the purpose of this? And also what markers would you reccomend? Awesome work btw!
Thank you! I think the dark colors hold a bit longer but mainly with each color darker you refine your sketch a little bit more. So that it isn‘t all in the same color 👌🏼
I want to buy the wand liner but i am not sure yet, i now use the fk Irons direkt 2 and the xion to line and sometimes injecta flite elite if my 4.0 cam is installed. Is it really worth the money to buy this machine? I heard it is a very hard hitter and small needle groups must be put in with approximately 5 volt, i must say those lines you put in are very crisp. You also mentioned that the kwadron ar having a membrame now, the other problem was that some batches did not fit great in my darlab grips. maybe That I go back and try them again . I am now using the Tasoul envy2, also a great cartrdges.
i haven‘t tried the direct 2 & xion. But in my opinion they are definitely worth the money. I bought some new Kwadron Liner and they are with membrane. Don‘t know if the shaders have it too. I wanted to try the envys. how are they?
JJ Ink the envy’s are great, but of you use wrapfoil to wrap your grip, make sure that the cartridges Stays fixed. Because of the ergonomic piece it somertimes sticks to the grip. I already had my share of flying cartridges around in the shop😅.
Nice wrk. Subd. Is this machine just for lining or all purpose I'm look for a great all purpose wireless. Been contemplating the flux
Super clean work man but those kwadrons spit ink/splatter like crazy!
great work man, I have the liner can't wait to use it. I was wondering why you used 3 different colors colors for the stencil; maybe to make it last longer? Seems very interesting. And I was wondering if you go above the 6-8 recommened volts? I have a faster hand speed but I'm afraid of burning it out
Thanks man 🙏🏼
I start to sketch with a light color and then i make adjustments with some darker colors. 👌🏼
No defininetly not above. but it depends on handspeed
thanks for tellin me about these markers bro theyre awesome, on sale at michaels right now. So I'm about to use my wand liner on myself for the first time; the pain from a 3.5 mm stroke doesnt bug me, but is this 5.0 mm stroke as painful as people say? I've heard mixed things.
You‘re welcome bro. i think these are the best! 🙌🏼
Everyone feels different but in my opinion if you want it you must get trough it 😄👌🏼
Hey just wondering after you use those markers for the stencil. Do you throw them away after or do you save them for other tattoos? I always wondered if you could save your markers I just want professional advice that way I can probably save a few bucks
Can I use my bishop wand shader to do script like this and what voltage my hand speed is a bit faster
Wow 😮 would you recommend the machine for fineline?
yeah for sure 👍🏼
Not bad... Nice work! !!!!!
Thank you! 🙏🏼
Fly work bro
Thank you! 🙏🏼
hey dude nice work what voltage are you running this liner please? 💪🏼💪🏼
Thanks man! 🙏🏼
around 7. depends on your handspeed
What size needle is better for Lettering or (black solid line work)??
RL 3,(35) or RL 3,(30)?
i would go with a .35 👍🏼
Davet Abadi I I always use a RL 5 .035 for small script. A RL 3 liner 3an give you a bit more Wobly lines. I use the RL 3 if I have to sculpt a letter a little bit Good Luck👍🏻
I want so bad to try this wand liner, I am currently using spektra xion 3.7 but it is not my favorite machine for linning...I bet this is so good with that punch...an stroke of 5? damn!
ohyeah give it a try! it‘s a beast! 🙌🏼
I use xion too, its best for fine line and shading and it is for a slower hand speed, longer session. The xion its a very good machine but only if you have patience. If you want something too speed up, try the dankubin, its expensive but its the best for lining. It has a lot of similar ones on the market, and cheaper, from other brands like VladBlad or Anvil. Other types are pens like wand liner or just coils.
I need a Dankubin someday! 🔥💯
So ive seen different Artist while doing script draw it out as you did and go over it a few times with different colors, does that hold for a good stencil? Or what would be the purpose of this? And also what markers would you reccomend? Awesome work btw!
Thank you!
I think the dark colors hold a bit longer but mainly with each color darker you refine your sketch a little bit more. So that it isn‘t all in the same color 👌🏼
I want to buy the wand liner but i am not sure yet, i now use the fk Irons direkt 2 and the xion to line and sometimes injecta flite elite if my 4.0 cam is installed. Is it really worth the money to buy this machine? I heard it is a very hard hitter and small needle groups must be put in with approximately 5 volt, i must say those lines you put in are very crisp. You also mentioned that the kwadron ar having a membrame now, the other problem was that some batches did not fit great in my darlab grips. maybe That I go back and try them again . I am now using the Tasoul envy2, also a great cartrdges.
i haven‘t tried the direct 2 & xion. But in my opinion they are definitely worth the money. I bought some new Kwadron Liner and they are with membrane. Don‘t know if the shaders have it too. I wanted to try the envys. how are they?
JJ Ink the envy’s are great, but of you use wrapfoil to wrap your grip, make sure that the cartridges Stays fixed. Because of the ergonomic piece it somertimes sticks to the grip. I already had my share of flying cartridges around in the shop😅.
hahahaha 🤣🙈
alright i think i have to try them 👌🏼
What do you think about using kwadron needles with a v6 bishop machine
I haven‘t tried the v6. But my liners are all Kwadron 💯👌🏼
Are you using a battery pack for this?
What size needle are you using for this piece...clean work broth
Thank you! Everything i use is in the video description 👌🏼
Dope
Thank you! 🙏🏼
@@JJInkre de de de deere de zdeere de de de$er=ered
What needle and tubes did you use for this? And how is the needle sticking out so far.. looks easier no pooling?
Disposable Bishop grips.
All needles are in the description 👍🏼
pooling?
Good video
3rl all the way right?
Nice work bro
Thank you very much! 🙏🏼🙏🏼
is it good for 1209RL 1211RL ?
Hii this is cool stuff. Is there any way i could use this as a template for my mrs tattoo
Hello thank you! 🙏🏼
But no tattoos should be unique.
How do you whipe without the stencil marker fading
Let it dry and then try tapping instead of whiping 👍🏼
😍😍😍
Thank you! 🙏🏼🙌🏼
What speed did u use
Perfect!! 👋 did you have photos of big sleeps ink after healing?
Thank you! 🙏🏼 i‘m looking for a few and text you
JJ Ink awesome thanks 🤟🏼
Will use only neddle 3rl ??
yes 👍🏼
How do u knw if your going too deep with needle in skin or too light..where it heals great?
It needs a lot of practice 👍🏼 But better go in too light than too deep!
Sir what kind of lettering is this called ?
Script lettering
What size needle??
What brand lining needles are those and what size needles are they
All in the video description ☝🏼👌🏼
Thank you
What brand of Cartridges You using ?
Kwadron. Best liner needles!
JJ Ink maybe great liners but without membrame. Beware it has cost me a substantial repair in my xion.
That‘s right but the new charges are with membrane 👍🏼
What do you think about the wand liner
I love it! Best liner rotary i‘ve ever used! 👍🏼
Not a liner for beginners though, it hits hard.
that‘s right
Très jolie 👌
Merci beaucoup 🙏🏼
what kind of markers
Sharpie & Tombow
What kind of font is that
freehand script 👌🏼
His hand writing lol
No shadows ?
nope she didn’t wanted it
What markers were you using ?
Brushmarkers from Tombow
@@JJInk thanks for sharing
No problem!
what voltage?
7 on this one
Nice but it looks like it has 2 d's in the spelling wow
I'm mean 1 d and 1 c
It don't even spell matata wtf
🤣🤣🤣