Save yourself some trouble and don't mess with your ECU box. Plug the red wire into empty fuse slot (e.g fuse 13 for sedan E46 is perfect), since you will be working in your footwell area anyways
@@TheIrek666 do u perhaps know if the angel eyes will work just fine if i do that? whats difference between that and ECU? i suppose it will work only when i set lights on in csr manualy right?
Of all the installs I’ve reviewed, yours, got me, is the most substantive I’ve seen. A question: Have you seen or found exact same angel eyes that allow color change via a remote and are LED?
JDM toy RGB switchback angel eyes. Had them on my e 46 but ended going back to plain white. Check out BMW Selena Angel Eyes install. Different electrical hook ups but same end result.
I would suggest getting that pos wire wrapped in something to protect it from rubbing against the chassis and short out. Even cut a slit in that rubber and get the cable through it.
Hey, when installing these on my 2000 323ci, a strange whine appeared near my master brake cyclinder, makes noise constantly and had to unplug the battery, any suggestions?
Ecu tap is for the ignition source. If you don’t connect it, the Angel eyes won’t come on when ignition is on. The footwell light tap is so the Angel eyes come on when you unlock the car.
@@icyw0lf937 I don’t have a diy written up to do that. You would just add a basic on/off switch going from the ecu to the switch. Then back to Angel eye harness
Jesus christ lads. Don't ever use those shit connectors on your car,you will burn it down. Go straight to your fuse box for powers and always use a fit for purpose relay. 90% of what you see guys doing on yt will fuck up your motor. To think that this guy is using cheep Chinese crappy wiring with a salute shit connectors on a m3?????common lads.is it really that difficult to do it right?
You can use the video diy for 80% of the install. Use this diy for the rest cdn.shopify.com/s/files/1/1953/3475/files/Angel_Eye_Guy_DIY_for_White_amber.pdf?6281104859294682878
@@angeleyeguy7941 I tapped the cable to the ecu and it gets power but it wont turn on the relay so the angel eyes dont have a power source, you think its the relay that is broken? When I put the cable thats going to the interior on + its lights the angel eyes on... I dont know what the problem is
best tutorial ive seen yet
Save yourself some trouble and don't mess with your ECU box. Plug the red wire into empty fuse slot (e.g fuse 13 for sedan E46 is perfect), since you will be working in your footwell area anyways
Thanks
hello, might i ask how this could hurt the car? is it mot safe to connect angel eyes this way? thanks for amswer
@@petancs194 if you're not careful and snip one of the ECU cables it may be problematic to fix. Tapping into an empty fuse slot is way safer
@@TheIrek666 do u perhaps know if the angel eyes will work just fine if i do that? whats difference between that and ECU? i suppose it will work only when i set lights on in csr manualy right?
@@petancs194 in both cases they will turn on with the key in ignition
Thank you, very detailed.
and don't forget to remove the ground cable from these lights before going to the technical inspection.
Of all the installs I’ve reviewed, yours, got me, is the most substantive I’ve seen. A question: Have you seen or found exact same angel eyes that allow color change via a remote and are LED?
angel-eye-guy.myshopify.com/products/e46-rgbw-chasing-angel-eyes
JDM toy RGB switchback angel eyes. Had them on my e 46 but ended going back to plain white.
Check out BMW Selena Angel Eyes install. Different electrical hook ups but same end result.
Is there a way to connect the angel eyes to the original daytime running lights connectors instead of connecting it to the ECU ignition wire?
Thanks, on the e46 m43 318ci its a green cable right? In that fuse box you show, When starting the car they turn on
I would suggest getting that pos wire wrapped in something to protect it from rubbing against the chassis and short out. Even cut a slit in that rubber and get the cable through it.
mine shorted out😢
Hey, when installing these on my 2000 323ci, a strange whine appeared near my master brake cyclinder, makes noise constantly and had to unplug the battery, any suggestions?
Any discount code?
what abt the other angel eye? where do i connect it? the ECU and the footwell just like the other one?
I don’t have that red-Wight yellow cable for the red wire, inname a 316i sedan, are there other options ?
Hi, have you found the right cable please, or any other option? Thanx
Do you have to tap both the ECU cable, AND the footwell light cable? Or can you pick which one is best for your setup?
Ecu tap is for the ignition source. If you don’t connect it, the Angel eyes won’t come on when ignition is on.
The footwell light tap is so the Angel eyes come on when you unlock the car.
I ordered a set recently and would like to clarify; Do you HAVE to tap both wires or can it be one or the other?
@@carlosaponte3877 You do not. I left the footwell light untapped. My halos come on only when the ignition is on.
@@crazzy88ssmaybe a dumb question but what did you do w the wire? Just have it hanging around?
@@crazzy88ssdid you tap into the ecu ?
Thanks!!
Instead of the ignition wire can we connect to an after market switch or button so that we can turn the light on and off while driving ?
Yes you can.
@@angeleyeguy7941 can you let me know in detail on how to do that ?? That would be a huge help and i guess lots of people wanna know too
@@icyw0lf937 I don’t have a diy written up to do that. You would just add a basic on/off switch going from the ecu to the switch. Then back to Angel eye harness
@@angeleyeguy7941 how to identify the wire in ecu mine looks different from yours?
do i need to connect the cable to ecu? does it work when i just start the engine?
I did it and only when the interior light are on the angle eyes work not if iam driving
Clean write up thank you. Do you sell the kits aswell?
Yes. Angeleyeguy.com
Does your E92 angel eyes work on the E90 lci?
Hi, do you ship to the UK?
Aynisindan siparis vermek istiyorum xenon icin nerden?
I have headlights that use H7 bulbs but also has projectors. Which one do I get? The halogen or the xenon Angel eyes?
@angel eye guy
did you need to splice anything? or did everything come assembled
Everything comes plug and play, minus the wires you need to tap yourself but wire taps come in the kit
Was about to watch this but that watermark you set to pulse was to annoying, sorry mate
Where does it buy this kit?
Hi, can i use this kit on my e92 year 2007 with xenon and change the wire connections? thanks a lot .
For a pre lci e92 you can purchase this kit
angel-eye-guy.myshopify.com/products/e9x-m3-e92-pre-lci-angel-eye-plug-play-kit
Do the t taps usually come with the angel eyes?
Yes it does
Jesus christ lads. Don't ever use those shit connectors on your car,you will burn it down. Go straight to your fuse box for powers and always use a fit for purpose relay. 90% of what you see guys doing on yt will fuck up your motor. To think that this guy is using cheep Chinese crappy wiring with a salute shit connectors on a m3?????common lads.is it really that difficult to do it right?
Is your shop still up and running
I placed an order 3 days ago so I hope
@@RyanHnZwhen does it come in and do u have it already?
I have the switch method, how do I use that?
You can use the video diy for 80% of the install. Use this diy for the rest
cdn.shopify.com/s/files/1/1953/3475/files/Angel_Eye_Guy_DIY_for_White_amber.pdf?6281104859294682878
Do i have to put cable to ecu? What does that wire do?
The wire that taps to the ecu is for the ignition source. If you don’t connect it, the Angel eyes won’t come on when ignition is on
@@angeleyeguy7941 I tapped the cable to the ecu and it gets power but it wont turn on the relay so the angel eyes dont have a power source, you think its the relay that is broken? When I put the cable thats going to the interior on + its lights the angel eyes on... I dont know what the problem is
@@asdasdasd6967 please send me an email joey@angeleyeguy.com
I’m really stuck with this, it’s very complicated for me
Send me an email joey@angeleyeguy.com
What are the sizes of the rings