Coleman CT200U-EX 1 Year Review

Поделиться
HTML-код
  • Опубликовано: 23 авг 2024
  • Coleman CT200U-EX
    Carb + Air Filter: amzn.to/3u2qZja
    Straight Pipe: amzn.to/37wanbk
    Torque Converter: amzn.to/3bsTYXg
    Shaft Adapter: amzn.to/3OlMNi8
    Springer Seat Springs: amzn.to/3fR4pWV
    Thumb Throttle: amzn.to/3ZBqBFD
    Sprocket: amzn.to/3SH0awx
    CT200U-EX Playlist: • Coleman CT200U-EX
    Socials:
    / discord
    / batahaaa

Комментарии • 44

  • @fwfrazorx
    @fwfrazorx 9 месяцев назад +6

    Could’ve bought a crotch rocket for the upgrades lol. Kidding, I just got one yesterday for $400. Rear fender had fallen off which tore a small hole in the seat but still has the nipples on the tires. Fun little thing and my dog loves it, he chases me around on it, so works great for their exercise lol

  • @staycalmandtestlife660
    @staycalmandtestlife660 11 месяцев назад +3

    Just got one. They are sweet. I just put a new head and exhaust system on, new pull start and jack shaft chain. Stage 2 carburetor next lol

  • @Smith_34
    @Smith_34 Год назад +5

    that exhaust is awesome

  • @JimBobZee
    @JimBobZee Месяц назад +1

    Looking good, I had to put rear shocks on my CT200U-EX.

  • @dagriddy4303
    @dagriddy4303 6 месяцев назад +4

    just got the thumb throttle you have it comes tomorrow ill update how i like it thnaks!

    • @cincostrack4831
      @cincostrack4831 2 месяца назад

      How do you like it?

    • @dagriddy4303
      @dagriddy4303 2 месяца назад

      @@cincostrack4831 i hated it lmao 😂😂 replaced it with a better twist throttle i got a nibbi throttle they are soooo good i wouldnt recommend the thumb throttle it made my thumb hurt a lot

  • @BigUnk85
    @BigUnk85 14 дней назад +1

    Awesome

  • @TheShowgunofHarlem
    @TheShowgunofHarlem Год назад +5

    Real quick, that governor screw you cut off doesn't do much. You have to take the engine apart and take the gear out.

    • @jacobg6528
      @jacobg6528 Год назад

      That was quick

    • @Hondacrf2024
      @Hondacrf2024 Год назад

      The governor is inside the engine the screw allows you to adjust and make it slower for children so they don't go over 5,10 mph,kmh, but that exhaust looks mint

  • @kevinvogt2023
    @kevinvogt2023 Год назад +4

    It’s not bad

  • @Willy38134
    @Willy38134 3 месяца назад +2

    can you elaborate on why the stock throttle doesnt work with the carb? that makes no sense. I've ordered all these parts minus the thumb throttle because i want to keep the normal one why do i need it

    • @Bataha
      @Bataha  3 месяца назад +1

      The throttle cable does not have a knob on the end of it. When installing the aftermarket carb, you need the knob to pull the silde up. Otherwise, the slide would not move and the throttle cable would slip through. Checkout this video of black66 same situation, see what he did, go to 3:51. ruclips.net/video/bXRQfwHEPfg/видео.htmlsi=SSLr3RKfCxJsRr5B

    • @Willy38134
      @Willy38134 3 месяца назад +2

      @@Bataha thank you, I see now. To my understanding I could just weld a small little tip on it so it doesn't slip out instead of buying a new throttle all together?

    • @Bataha
      @Bataha  3 месяца назад

      @@Willy38134 Yes sir. You would have to solder it just like in the black66 video.

    • @Willy38134
      @Willy38134 3 месяца назад +1

      @@Bataha yeah i mean solder not weld 😆tysm for the help again man, im getting the same exact build as you i love these videos.

    • @Bataha
      @Bataha  3 месяца назад

      @@Willy38134 yeah for sure man, no problem.

  • @joshua4o883
    @joshua4o883 5 месяцев назад +3

    Mines going 75 predator 212 swap

  • @BamMartinez
    @BamMartinez Год назад +1

    Super cool

  • @lotus6314
    @lotus6314 6 месяцев назад +3

    Can you possibly send me the link for the sprockets you bought?

    • @Bataha
      @Bataha  6 месяцев назад

      amzn.to/3SH0awx

    • @lotus6314
      @lotus6314 6 месяцев назад +1

      @@Batahathank you bro.

  • @DragonKing-kt7pu
    @DragonKing-kt7pu Год назад +2

    I want to cut the governor screw off my colemam ct200 ex but I just don’t no if it Will blow the engine up because mine only gets 20 mph and I want it to go A little faster

    • @Bataha
      @Bataha  Год назад +1

      I don’t think it will. Especially if the governor arm and throttle linkage are still in place. The internal governor will still work.

    • @DragonKing-kt7pu
      @DragonKing-kt7pu Год назад +1

      OK thank you so much

    • @larzlustie8674
      @larzlustie8674 Год назад

      There is one mod you can do , I have two of these bikes . Now take into account this is not a proper "removal" of the governor gear but it does work. Takes two zip ties

  • @HipaParts
    @HipaParts 11 месяцев назад +2

    Awesome review. Are you up for a collaboration on small engine repair by the way? Hipa supplies small engine parts and I'm looking for youtubers to work with sharing more tips of small engine repair to help the community.

    • @Bataha
      @Bataha  11 месяцев назад +1

      yes, I would be intrested in talking it over.

  • @Garage-wt5jl
    @Garage-wt5jl 11 месяцев назад +3

    If I want more speed can I just jump right to the carb upgrade?

    • @Bataha
      @Bataha  11 месяцев назад +4

      Yes. But you might not get much speed. For higher top speed you'll need to do something with the gearing first.

    • @Garage-wt5jl
      @Garage-wt5jl 11 месяцев назад +2

      @@Bataha Totally understand! Thanks. I'm def getting one of these little guys

  • @onewayirvin2666
    @onewayirvin2666 Год назад +3

    I need u to mod mines to go 42😂 I hope u in Virginia 😢

    • @Bataha
      @Bataha  Год назад

      I’m in Texas. These mods are pretty easy. Watch my videos or other videos on RUclips and you should be able to do it.

  • @HaynesterMx1
    @HaynesterMx1 Год назад +2

    I have ct100u but the minunet I pull start it it rips off when I start it I have to find out why it does that and get it fixed

    • @Bataha
      @Bataha  Год назад +1

      The cord rips off or the entire pull start assembly?

    • @HaynesterMx1
      @HaynesterMx1 Год назад +2

      @@Bataha no the bike rips off when i start it like it takes off

    • @Bataha
      @Bataha  Год назад

      @@HaynesterMx1 do you have the stock jackshaft or a clutch on it? Most likely the clutch is sticking causing it to take off right when you start the bike.

    • @xptics
      @xptics 7 месяцев назад +1

      @@HaynesterMx1 either what he said, or your throttle is sticking open, if what he said didn’t work, maybe try cleaning ur carb cuz it might be gummy

  • @Canadian_Craftsman
    @Canadian_Craftsman Год назад +3

    There will deff be glitter filled oil 😅 haha these motors puke metal shavings but it's norm deff change the oil!!😂✌️💚

  • @maccook2938
    @maccook2938 7 месяцев назад +1

    What brand and where did you get your carburetor kit?

    • @Bataha
      @Bataha  7 месяцев назад

      amzn.to/3u2qZja

  • @blivrov3738
    @blivrov3738 Год назад +1

    Do another video on the tao your views will skyrocket again find your popular videos and milk the views on them