2003 MR2 Spyder Rear Brakes
HTML-код
- Опубликовано: 2 апр 2018
- How to do rear brakes on Toyota MR2 Spyder
GET THE REAR BRAKE TOYOTA PADS HERE ( AMAZON )
amzn.to/3zkDB7V
GET THE REAR CALIPER TOOL HERE ( AMAZON)
amzn.to/3gK2qUp
TOYOTA REAR PADS PART # 04466-17100 Авто/Мото
GET THE REAR BRAKE TOYOTA PADS HERE ( AMAZON )
amzn.to/3zkDB7V
GET THE REAR CALIPER TOOL HERE ( AMAZON)
amzn.to/3gK2qUp
TOYOTA REAR PADS PART # 04466-17100
Thanks Gearmo!
Just did my 2 rear brake pad swaps in about 1-1/4 hrs total. The shop manual shows disconnecting the parking brake lever first. This also lets the entire brake caliper swing up easily and hang with a wire. And I undid the rubber brake reservoir cap to release the pressure, no other opening or bleeding system needed. The reservoir level rose about 1/4 in. after I finished 2 rear wheels. I bought that 22 piece tool kit you showed for about $20, and it worked perfectly. Took alot of muscle to twist the piston in. Depressed it halfway and tried it and a little more made it work. Didn't need to go all the way in, so save youself some torqueing. Also noticed it was a little harder getting the parking brake hooked back up due to the extra travel on account of fresh pads.
Now to do the front brakes!
Isn't youtube awesome??
So ABS will not be damage when you change the rear pads?
bruh you are so lucky all those bolts came off so easy. Mine were so tight that I had to use a breaker bar on all the 17mm bolts.
thanks for the video! Did everything but the brake bleed which is well documented anyway
Thank you so much, exactly what i was looking for
thanks for the video! to the point and informative. I need to grab one of those specialty compress brake tool for my next brake change
Perfect.
So You didn't disconnect the parking ebrake? also ABS system didn't get damage?
Nope all good