i messed up my memory card for cube and cant find right img file for super console x you have been my saviour helping me set up loads of things can you help mate ?
It might not be directly possible using PC, but when your device is booted and you have access to the sdcard, use some rooted file managers to get access to it's partitions, there shall be folder like ~EMULEC it has all internal files in it
I followed every step in this video I was able to install emuelec and everything was looking good except there's nowhere on my SD card for my roms to go. How do add roms?
You can download emulator apps on Android TV for n64, Dreamcast, psp (I think). There should be one for retroarch. Just load your roms onto an SD card and you should be able to open them in those apps.
thank u soooo much i been trying to make my h96 pro stick to work to install for days but no avail. i seem many tutorials but what ppl forget to mention is the Root LibreELEC!!! for gods sakes man that was all i needed lol
@@TeamPandory thank u but now I got another problem 🤦🏻♂️ The resolution get messed up everytime i exit a game. Get all green and zoomed in. Any fix to this?
Got an x88 pro mini that has an s905x3 and 4g/32g ram/storage. Easily got emuelec on it. Had it hooked to my tv and all is fine. Planned on hooking it up to a monitor which doesn't have sound capabilities, so I was just going to use its 3.5mm headphone jack hooked up to an external amp. Unfortunately I can not get emuelec to output any sound out of the 3.5mm jack. I've tried changing the audio device in emuelec settings, rebooting after each change and nothing. I figured I got a bad unit, so I took the SD card out and turned it on, booted into android and the 3.5mm jack outputs sound just fine, heck it'll even output audio through the DS4 I'm using for the controller (neither the 3.5mm jack or DS4 will output audio while in emuelec). My guess is that emuelec is trying to send audio though the HDMI cable and not allowing audio to go to the 3.5mm jack. I booted up the terminal and took a look in alsamixer while in emuelec and it shows the boxes audio system, and even shows the controller. But nothing I do gets audio out of the 3.5mm jack. I don't know what else I can try to force audio out of the headphone jack. Someone told me to mess with asound.conf and change the device, which sounds like what you do in the emuelec audio device settings.
First thing you can check is the EmuELEC Audio settings in the menu. Second thing you can do, is to check config files via network whilst loaded, change audio output to "jack"
@@TeamPandory 1st as I already said I already did that (audio device settings in emuelec) tried 0,0 0,1 1,0 1,1 rebooted after each change and nothing. 2nd so how do I do this
Great vid bro thanks 👍👍 I'm sure I'm gonna have to watch it a few more times to get the full gist but you've given me everything I needed to know. Cheers 👍👍👍
I cannot get my HK1 box (makeup box) to boot to a flashed SD card. Tried a 256gb and a 128gb card with sm1_s905x3_4g.dtb, sm1_s905x3_4g_1gbit.dtb and sm1_s905x3_4g_1gbit_slowsdio.dtb (renamed to dtb.img). Cards are recognised in the android file explorer, but they just won't boot via reboot with Libreelec or Terminal Emulator. I get a black screen sometimes, other times it flashes up the HK1 Series logo then to black again (repeat). Believe the unit itself might be defective, as I don't know what else to try.
Leave it at stock is best advice ... Unless you only want it to run amiga / swanstation - and for that I'd suggest getting an s905x3 box like we reviewed. You could pull the games from the console x and have it work on a more capable system.
Android will still be there. Shut down emuelec, take out the microsd, then start up the box again, you'll get android. I think there's even an option within emuelec "boot from nand" which loads up your android system
dear friend i do all your steps ...but when i move tree device ...the tv box not run emuelec its stop on android world ...my device s905 but i don't know its p212 or p200 or p201
Greate guide Thanks! Can you do the same with an USB stick instead of SD card? I have tried myself but did not work as it will not load the Emuelec. I have the A905x4 which I could not find on the device tree so not sure if that is the reason.
Hey there. So the 905x4 chip currently doesn't have any dtb files, but afaik they're an overclocked 905x3, so if the boot to libreelec file works (and it resets) then you can try using the 905x3 2gb or 4gb versions. You may have some luck.
Great video, very informative and easily explained, am using an MX Q PRO 4 G box, one of my boxes is stuck, am unable to reset it to factory settings, is there any way i can make it run again ???
Probably by reflashing the firmware... Sometimes it's best to throw it then get something new. The hk1 we reviewed a few weeks back is an excellent option for under 40$
@@TeamPandory hey thanks have already considered a new buy, but for educational purposes and keep myself updated with newer tech options, what is the best method / app to reflash the firmware, how do i get the right app that meets the box's specs . Your video on the hk1 too very interesting nd yes it seems a good box worth trying out, only have to see if available here in India.
@@TeamPandory hey, thanks friend, as i said want to use this as an experiment to be up and savvy with new trends in tech , will def replace the box with a new one, but this has given me an opportunity to experiment and i wanna do it to enhance my knowledge n experience, keep posting, love your videos
My games sub folder (the game system folders) are not showing up. Ive flashed cards before, and this is the first time this has happened and I don't know what to do
@@TeamPandory hi mate ! Good news, it was actually working and it flashed fine. My PC wasn't picking up the drive letter on the SD card. I changed the path letter and it all worked as normal.. caused me a lot of frustration for no reason. It all worked out in the end
Use terminal as explained in this video @8:22. Alternatively, you can see if there's a switch inside the headphone jack. Hold it then turn it on. Keep it held until it starts up. It may be a locked box. If that's the case then you'd need to search if there's another firmware you can burn.
Great tutorial. I've ben to al the steps Still the same problem here, Already also tried to make a EmuELEC on a 32gb card but same problem. There is something wrong with my "dtb.img" I have no clue why my HK1 box is not recognizing the boot of the Sd card.
Did you check the chipset? - s905x3? Fake check microsd/ try another microsd ? Did boot to libreelec actually reboot the system ? Do microsd actually read (try in android)?
@@TeamPandory thanks for your help :). I think the problem is the device itself. I tried different SD cards, also just formatted clean sd and then putting in the HK1 box. He always says the same that the card is not supported. I downloaded the apps like Aida64 from the play store and everything seems okay for what the specs are. I think I have to buy a new HK1 or something else. Out of frustration I used my SD for upgrading emu 4.0 on the super console X pro. Everything works well, even the last stap in the network replacing files in the machine. I'm glad I could fix that, now I can blame the HK1 box 😄. I'll keep you informed.
@@robwales2282 thanks for the helping support. I found the problem with the SD card slot. Yesterday I was putting the SD in and out en tried everything. Suddenly the file browser app in the Android system itself recognized the SD card, so I was happy, but when I reboot he does it again, he only recognizes is own internal GB space. So again pulling and trowing in and out the SD in the slot and again after 20 times in and out the SD again finally feels the SD and reading it but there is something wrong. Or is this common with the HK1 box? If I push the SD in my console X pro at the moment he's running just the Android TV box, immediately he signifies the SD card and if I reboot (with a card that has no EmuELEC on it), and go to the file folder, I immediately see that the SD is connected. To be 100% sure my SD cards are not the problem I putted them in a SD card usb 3.0 reader and sticked that in. After 5 sec he signifies it and shows the extra GB ram partitions. So Im gonna try to send the HK1 box back to the seller and order a new one. Yesterday evening playing (N64) 007 Goldeneye on my super console X pro butt it sucks 🐢😖
Hello, in Emuelec 4, a folder for game images is created automatically, but in 3.9 there is no way to make this folder (there are not only games there)
Hi all i have a powkiddy y6 game stick. I backed up everything to my mac. Wanted to add games and now no games are showing on emulec menu. I only formatted the roms partition as it had no space to add games. Other partition is emulec with the software files. Now when I load the y6 no games are showing on emulec at all. I dont know how to find the scan game list section on emulec if thats the way to do it? Please help! 🙏🏿
I tried . No pin , reset using the terminal. Libreelec I tried everything, I even got a new sd card. . Look , I I used another box and worked . This box , x88pro mini is not good . It will now work. Thanks again for the help .
Emuelec is another system entirely. It loads up Linux. You could go half way and load up a front end to android and have it look kind of similar. Check out daijishiro (I think that's the name)
Hey there do u know why when I put the SD in my computer to load the games on my SD it doesn't show the roms it only shows the d drive that shows emuelec with the files but no roms
@@TeamPandory I jave the roms ready but on the SD card when I put it on my laptop it shows the emuelec files but it doesn't show the roms names so o can just drag the file
Hi there. I have followed all your instructions but it isn't giving me a readable partition to put the rooms into. Please help I have tried everything.
After it has run once, a partition will be made. Depending on the version it will be either a Windows readable one, or Linux. In the case of Linux, it's probably better to use WiFi to copy over your games
Thanks for this, how about the other way around, what if I want to boot my Android box then start with Android OS first? How do I get this done? Thank you....
Hi. I bought a hk1 box. But thought that I would go for the newer android 10 version. After receiving it, realised that it has a different chipset on it. The rockchip rk30. Is there any way to get Emulec on this box? Any help would be really appreciated.
Emuelec is exclusive for amlogic chips. You may be able to find something that runs on it, but you'd need to search out the exact chip. Rk30... Um. You may need to check the complete name of the chip.
Oh crap. I thought that might be the case. I think according to Aida 64 the chip may be a rk30sdk or rk3328. Looks like I've got a spare android box. Thanks for all your help.
On thanks. I'm happy to the this out. I clicked on the link but not sure what to do now. Am I supposed to flash something to SD card like I would Emulec. Could you point me in the right direction. Thanks
When running a mame game that does not work, an error screen appears. How does one exit this screen and return to the main menu? None of the keys on the gamepad work for this, so have to reboot. Also, how does one add a coin? Thanks for your help.😃
Use the select/ start and change the emulator core- keep switching until the game starts. Coin in is bound to SELECT on your pad that you set up through emuelec
hi i bought a chinese tv box with this emuelec on it i changed the resolution to 4k and how it shows as if the new resolution is not recognized and keep looping the same booting image how can i get it back to 1080p or 720p again ? thanx
I do everything right for X96 air the box boot but once i take out the usb to put roms on their folders and put it back on the box there's error on Emuelec and it wont boot 😭😭😭
@@TeamPandory played around with DTB files finally i found the one that worked there's little information which one to use for 4GB version of X96 air, when i inserted the usb back on windows after the first boot there weren't an EEROMS partition so windows was just giving me endless errors, so out of luck i tried different DTB files got the one that worked, thanks
Thank you very much for sharing, but when I completed the installation, the memory card capacity was lost so much that I could not copy more games. Please guide me how to fix it.
At a guess, you're referring to the microsd when inserting into a Windows machine. Once emuelec starts for the first time, it creates a Linux partition with the rest of the space that isn't easily accessible in Windows. In order to copy over games, follow the next video in the series on "Adding Games" ruclips.net/video/m33sCMju4jM/видео.htmlfeature=shared
I cant understand - what magic you need to do to connect some controllers to Emuelec, i searched for ours and can't fing an answer (in my case Ipega 9156 gamepad)
Same as any system. If there is no compatible driver, it won't work. Why not drop by the emuelec discord and ask them there, they may be able to help you out.
I'm having trouble with other controllers, I've tried mapping out the buttons for three different controllers and the button layout is all mixed around during gameplay. Which is odd because the controllers the console comes with on my device don't do that. What is wrong with using other controllers? I even mapped out the buttons and they are all mixed up during gameplay....?
Thank you for this helpful video! Works perfectly on my TX3. But, is there any other way to switch between Android and Emuelec, instead of inserting and removing sd card? Something like Windows/Linux dual boot.
It's pretty much the same as a windows Linux dual boot... Having them on the same drive is a nightmare - keeping them separate ftw ;-) But yeah, I see what you mean - don't want to be missing taking out the microsd etc... And the answer is, not that I know of. I'd just settle for emuelec for retrogaming and android for random bits -most the time it's set to emuelec.
@@TeamPandory Fortunatelly, there is an option in Emuelec Quit menu. Reboot from nand should be selected, and next reboot it will go directly into Android, that can be operated by remote. On next power on, Emuelec has boot priority again. Anyway, thanks for your reply and previous work. A week ago, I knew nothing about all of this. Greetings from Serbia!
It’s x88 pro mini . It runs Android 10. The box is fast. It seems all the dtb files are not for this box. I tried 905x2 , 905x . All of it. It goes to recovery mode. The box won’t read the IMG FILE. I gave up. I bought a h96 max. It works and I recommend it.
I've found that the Android 10 boxes usually sport the Allwinner chips, vs Amlogic who usually reside on Android 9. One more thing to look out for is "netstreaming", "netflix" or "Google Certified" - avoid those if you want to use ELEC
Ok so I am really really struggling. I’ve managed to flash my sd with 3.9 no issue, I cannot for the life of me work out the correct file for the dtb files, when using terminal I have a38@p201 come up (missing a couple of digits left as resolution is out a bit). My box is running. P201 with 1gb ram and 2ghz speed. Every dtb file I check and try just boots on infinite loop with the tv splash screen. Getting so so frustrated
Hi Great video, but I am having major problems, my H96 max say disk safely ejected, every time I insert my SanDisk ultra micro sdxc uhs1 card. Any ideas please as I just can't solve it?
@@TeamPandory Hi, it turned out to be sd card was formated as exfat, so I formated it to fat 32 and it works fine, my only problem is I can't see my chipset in the emuelec, rockchip RK3318 4x arm cortex 53@1104 mhz
I don't own one, so can't tell you for sure. However, you could try that boot to libreelec file in at around 8 minutes. Got a feeling that these Amazon devices cannot be rooted - so no emuelec.
Hello, I hope you can read my comment. When I use terminal emulator and enter cat /proc/device/-tree/amlogic-dt-id commands, I get the error No such file or directory.. what should I do? Features of the device I used gamebox g5 p201 amlogic board 4gb ram. I can't find compatible device tree.
I have the pawky box, accidently formatted the sd card... Ran through the steps and mine said p242_1ghx_s905x but didn't find that in the list! Any suggestions? It has 1gb of ram so obviously I want to go with the 3.9 but what dtb file should I use... I was also attempting to install a version of batocera or retropi just to see if it can be done. Now I believe that retropi doesn't support amlogic processors so that most likely is out the picture!
@@TeamPandory found a video on restoring the Super Console x, they provided a link to restore files that had three different dtb imgs... When I burned the 3.9 generic image to the sd card it made the partition primary and for some reason my Windows 10 Alienware laptop would not bring the partition up so I had to go in mini partition tool to change the partition to logic to gain access to it. Then I copied the dtb.img for console x 905L chip to the sd card and at first it didn't work. I went back into mini partition tool and change the emuelec partition to primary again and it loaded emuelec. Now the regular dtb.img that the video I found directs you to just might work as well. Now on to getting games back on to the system... I am going to make a video on my channel to document my issue and the solution. Ironically glad I accidently formatted the sd card because I am learning things that most tutorials don't teach you when burning the image to the sd card. Ton of time devoted but well worth it. Thanks for the suggestion and sorry for the long comment.
@@Wedeemgaming your laptop / windows laptop won't read the drives as they're Linux partitions per default. We made a separate tutorial regarding installing emuelec and games, demonstrating how to use the official image rather than the hacked versions.
@@TeamPandory Thanks for letting me know. I returned that box to amazon and now got a Transpeed S905x4 box. Is this Amlogic supported? and which file do I use?
I have the new EmuElec 4.0 for my Super Console X pro(thanks for the great tutorial, btw!), but I can't figure out if it's using Duckstation as the default PSX emulator. I want to switch it to that. How do I know which Emulator it's using for which system and where do I go to change that? Thanks and sorry for the trouble
I've installed the 3 files on my HK1 4GB box, flashed the SD card with Emuelec 4.0, but when I reboot using Libreelec, it hangs on a solid blue screen. Any ideas? thx! your videos are great!
it eventually goes to an Android Recovery screen Amlogic/u219/u219 something like PPR1.189519.911 user/release-keys User volume up/down...and below there is a menu to reboot, delete partitions, etc...
@@lesliecheung7877 could be a few things. First can you verify the android version it's running, and the cpu / memory with aida ? If it hangs on a hk1 screen then you'll either have a microsd or incorrect dtb issue.
@@lesliecheung7877 the dtb should be 905x3 4g 1gbit then. If that doesn't work try 2g version. It could be that the ram configuration of your system doesn't get along with emuelec.
HELP! I have a S905W2 and with Aida64 I get "oppen" as device tree(don't know what that means). So I went with the emulator and it said the device tree is "s4_s905w2_ap201_4g" which is very similar to the one on the device trees website. My question is, which version of Emuelec should I use? I have tried the 4.6, 4.0 and 3.9 but none of them have that device tree that I could use as a "dtb.img" file
@@TeamPandorythanks for the tempestive reply! I am sorry to ask for help again, but I can't seem to find my device's device tree in the 3.9 version. Do I just have to try every single one until I find the correct one or do I have to try an older version?
Maybe try a different monitor? I think some boxes have issues with 4K televisions, which may need sorting by setting video settings for 1080p in Android.
EmuELEC is installed to the microsd separately to the TV Box software. Unplug the microsd and turn it on, then you'll have Android. You won't lose anything.
@@MarioTran2307 if it is the one with the s912, then you'd need to use emuelec 3.9... check the emuelec GitHub page and it says something about the s912 on the release page. Grab the generic.
Hey guys. I have an X96 Air TV box coming in. S905X3, 2GB RAM, 16GB ROM. One thing I didn't notice when looking around was that these boxes claim to only support 32GB microSD cards, 64GB sometimes, I reckon. Have you guys tried putting in a 128GB or 256GB microSD in these boxes? Thanks.
@@TeamPandory btw dude didn't you put out a package for EmuElec 4.0 called EmuChicken pack or something? I downloaded it some time ago but I can't remember what to do with it lol.
This is very awesome I'm wondering if I can do this to my Nvidia Shield and use my USB for my games and use the SD card to boot this or any of these possible
I have an Easytone T95 android box. 4Gb RAM and 32Gb ROM. Can you tell me please which version of LibreELEC I need to find and which version of EMUElec would be best?
@@TeamPandory SO used AIDA64 as shown in your video. It has an exdroid board, Walleye is the device with 4Gb RAM and the GPU is Mali-G31. So have I bought a box that isn't supported? if so who do I contact to see if they wil try and include support for this box?
@@AmbersKnight If it's the T95 that you mentioned earlier, then it's a Rockchip. Those boards simply don't work with software that is specifically designed to be used with the Amlogic family. It's like trying to get a PS4 game work in an Xbox360... Not going to happen.
@@TeamPandory I see. I have went a slightly different route and downloaded RetroArch64 instead as I think that one has more chance of being compatible with my Android box. Thanks for the advice though, I do appreciate it.
You can either hold the reset button when you power it on while having the SD card inserted (the reset button is inside the headphone jack, I just used a q-tip that I snipped the end off of, the hollow ones will not work). Or you can use libeelec that you can sideload.
Sorry to hear that. It doesn't work with every android box (only amlogic with an unlocked boot). If you wanted any help you'd need to share some more information about your system or this post is nothing but hot air.
N64 is and always will be hit and miss, depending on the game you play. Mario and fzero lighter than banjo, cruisin etc. If you want all n64 working, your choifes are either to invest in a pc, or n64.
Reboot to emuelec always goes to a black screen. I have tried every sm1 905x3 and its always the same. Is there another way to make it work? I try many things but Never works. Trying to save up for another box maybe but I have nothin right now
Perfect, thanks! I am working on something similar for my Android boxes :)
found you here!
i messed up my memory card for cube and cant find right img file for super console x you have been my saviour helping me set up loads of things can you help mate ?
Do you have a tutorial on how to change the splash screen to your own in Emuelec?
It might not be directly possible using PC, but when your device is booted and you have access to the sdcard, use some rooted file managers to get access to it's partitions, there shall be folder like ~EMULEC it has all internal files in it
Great video as always. Simple and to the point, with a little touch of that humor! Thank you again!!!
I followed every step in this video I was able to install emuelec and everything was looking good except there's nowhere on my SD card for my roms to go. How do add roms?
This was great, excellent, I can use my console with all the games with no problems, thank you very much!!!!
I didn't see Amlogic S905X4 on the list. So, this chip is not yet supported by Emuelec?
You can download emulator apps on Android TV for n64, Dreamcast, psp (I think). There should be one for retroarch. Just load your roms onto an SD card and you should be able to open them in those apps.
Thanks for the great tutorial. Works great for my GT King.
Thanks Emu, always great and simple to follow 👍🏼
I’m running some tests . I’ll let you know
Thank you
thank u soooo much i been trying to make my h96 pro stick to work to install for days but no avail. i seem many tutorials but what ppl forget to mention is the Root LibreELEC!!! for gods sakes man that was all i needed lol
Happy to help :-)
@@TeamPandory but now i cant access to the roms the 2nd partition says i must format? can u help plz
@@Stand4Righteousness check the next video in the eemc video series. "Adding games"
@@TeamPandory thank u but now I got another problem 🤦🏻♂️
The resolution get messed up everytime i exit a game. Get all green and zoomed in. Any fix to this?
@@Stand4Righteousness I take it you're using a 4K TV? I think you need to set resolution in Android to 1080p.
Thank you, thank you, THANK YOU! This was AWESOME!
Glad it made your day :)
thanks for the video, nice easy to understand and the terminal and other apks to determine dtb was very helpful
Got an x88 pro mini that has an s905x3 and 4g/32g ram/storage. Easily got emuelec on it. Had it hooked to my tv and all is fine.
Planned on hooking it up to a monitor which doesn't have sound capabilities, so I was just going to use its 3.5mm headphone jack hooked up to an external amp.
Unfortunately I can not get emuelec to output any sound out of the 3.5mm jack. I've tried changing the audio device in emuelec settings, rebooting after each change and nothing.
I figured I got a bad unit, so I took the SD card out and turned it on, booted into android and the 3.5mm jack outputs sound just fine, heck it'll even output audio through the DS4 I'm using for the controller (neither the 3.5mm jack or DS4 will output audio while in emuelec).
My guess is that emuelec is trying to send audio though the HDMI cable and not allowing audio to go to the 3.5mm jack.
I booted up the terminal and took a look in alsamixer while in emuelec and it shows the boxes audio system, and even shows the controller. But nothing I do gets audio out of the 3.5mm jack.
I don't know what else I can try to force audio out of the headphone jack. Someone told me to mess with asound.conf and change the device, which sounds like what you do in the emuelec audio device settings.
First thing you can check is the EmuELEC Audio settings in the menu. Second thing you can do, is to check config files via network whilst loaded, change audio output to "jack"
@@TeamPandory 1st as I already said I already did that (audio device settings in emuelec) tried 0,0 0,1 1,0 1,1 rebooted after each change and nothing.
2nd so how do I do this
Thank you, the process worked, but I have a question: where can I find the rest of the games?
Great vid bro thanks 👍👍 I'm sure I'm gonna have to watch it a few more times to get the full gist but you've given me everything I needed to know. Cheers 👍👍👍
Glad we could help
I cannot get my HK1 box (makeup box) to boot to a flashed SD card. Tried a 256gb and a 128gb card with sm1_s905x3_4g.dtb, sm1_s905x3_4g_1gbit.dtb and sm1_s905x3_4g_1gbit_slowsdio.dtb (renamed to dtb.img). Cards are recognised in the android file explorer, but they just won't boot via reboot with Libreelec or Terminal Emulator. I get a black screen sometimes, other times it flashes up the HK1 Series logo then to black again (repeat). Believe the unit itself might be defective, as I don't know what else to try.
Same problem here with that box. Tried sevral cards and imgs, but no way it reboots from the card.
I have my Console X Pro coming in. Should I upgrade to 4.0? I imagine I should just leave it at 3.9 stock.
Leave it at stock is best advice ... Unless you only want it to run amiga / swanstation - and for that I'd suggest getting an s905x3 box like we reviewed. You could pull the games from the console x and have it work on a more capable system.
@@TeamPandory ok thanks bro.
I have the Blue Super Console X Pro One Please help how can I put Emuelec back on it???
Hola por favor respóndeme lo más pronto posible , quisiera saber si puedo instalar emuelec en un tv box versión stick
Juat a question when I remove the SD card from my box. Will the box revert back to how it was with everything on it all my apps?
Android will still be there.
Shut down emuelec, take out the microsd, then start up the box again, you'll get android.
I think there's even an option within emuelec "boot from nand" which loads up your android system
dear friend i do all your steps ...but when i move tree device ...the tv box not run emuelec its stop on android world ...my device s905 but i don't know its p212 or p200 or p201
Greate guide Thanks! Can you do the same with an USB stick instead of SD card? I have tried myself but did not work as it will not load the Emuelec. I have the A905x4 which I could not find on the device tree so not sure if that is the reason.
Hey there.
So the 905x4 chip currently doesn't have any dtb files, but afaik they're an overclocked 905x3, so if the boot to libreelec file works (and it resets) then you can try using the 905x3 2gb or 4gb versions. You may have some luck.
Unsure on usb card. But it should be ok.
Amazing tutorial as always
Great video, very informative and easily explained, am using an MX Q PRO 4 G box, one of my boxes is stuck, am unable to reset it to factory settings, is there any way i can make it run again ???
Probably by reflashing the firmware... Sometimes it's best to throw it then get something new. The hk1 we reviewed a few weeks back is an excellent option for under 40$
@@TeamPandory hey thanks have already considered a new buy, but for educational purposes and keep myself updated with newer tech options, what is the best method / app to reflash the firmware, how do i get the right app that meets the box's specs . Your video on the hk1 too very interesting nd yes it seems a good box worth trying out, only have to see if available here in India.
@@pareshbalsara4662 check the xda-developers forum for a custom ROM for that box. I can't really guide any more on that.
@@TeamPandory hey, thanks friend, as i said want to use this as an experiment to be up and savvy with new trends in tech , will def replace the box with a new one, but this has given me an opportunity to experiment and i wanna do it to enhance my knowledge n experience, keep posting, love your videos
Do u prefer emuelec over batocera
Clear, useful actions, congratulations 👏👍
Thanks!
My games sub folder (the game system folders) are not showing up.
Ive flashed cards before, and this is the first time this has happened and I don't know what to do
Have you added the dtb and actually loaded it up in your box yet?
@@TeamPandory hi mate ! Good news, it was actually working and it flashed fine. My PC wasn't picking up the drive letter on the SD card. I changed the path letter and it all worked as normal.. caused me a lot of frustration for no reason. It all worked out in the end
Thanks for this video. I'm struggling to find root LibreELEC, is there any other programs that will work?
Use terminal as explained in this video @8:22.
Alternatively, you can see if there's a switch inside the headphone jack. Hold it then turn it on. Keep it held until it starts up.
It may be a locked box. If that's the case then you'd need to search if there's another firmware you can burn.
Wonderful video. My game stick stopped booting up EmueLEC. What’s the best way to fix it?
Might be best starting a new microsd from scratch and then add what you like to that.
@@TeamPandory I’ll give that a try. Thanks
I'm using a PS4 controller and after booting to EmuElec, it can't detect the controller even with a Bluetooth dongle plugged in.
hello again, tell me which tv box is better to buy for 64-bit emuelec
ruclips.net/video/zEgK7EOD8mc/видео.html
Awesome video thanks for sharing !!
Great guide :-) I've always wanted to know what the ng means - any idea?
Uhnnn "next generation" ? "Neo geo"?
My android box has 3gb of ram and Amlogic S912 processor which version do I download and install?
Great tutorial.
I've ben to al the steps
Still the same problem here,
Already also tried to make a EmuELEC on a 32gb card but same problem.
There is something wrong with my "dtb.img" I have no clue why my HK1 box is not recognizing the boot of the Sd card.
Did you check the chipset? - s905x3? Fake check microsd/ try another microsd ? Did boot to libreelec actually reboot the system ? Do microsd actually read (try in android)?
@@TeamPandory thanks for your help :).
I think the problem is the device itself.
I tried different SD cards, also just formatted clean sd and then putting in the HK1 box. He always says the same that the card is not supported. I downloaded the apps like Aida64 from the play store and everything seems okay for what the specs are.
I think I have to buy a new HK1 or something else.
Out of frustration I used my SD for upgrading emu 4.0 on the super console X pro. Everything works well, even the last stap in the network replacing files in the machine. I'm glad I could fix that, now I can blame the HK1 box 😄. I'll keep you informed.
Try a few dtb.img files, it has taken me ages to get it to work, try the other method reebot system on the terminal, download the Terminal App.
@@robwales2282 thanks for the helping support. I found the problem with the SD card slot. Yesterday I was putting the SD in and out en tried everything. Suddenly the file browser app in the Android system itself recognized the SD card, so I was happy, but when I reboot he does it again, he only recognizes is own internal GB space. So again pulling and trowing in and out the SD in the slot and again after 20 times in and out the SD again finally feels the SD and reading it but there is something wrong.
Or is this common with the HK1 box?
If I push the SD in my console X pro at the moment he's running just the Android TV box, immediately he signifies the SD card and if I reboot (with a card that has no EmuELEC on it), and go to the file folder, I immediately see that the SD is connected.
To be 100% sure my SD cards are not the problem I putted them in a SD card usb 3.0 reader and sticked that in. After 5 sec he signifies it and shows the extra GB ram partitions.
So Im gonna try to send the HK1 box back to the seller and order a new one.
Yesterday evening playing (N64) 007 Goldeneye on my super console X pro butt it sucks 🐢😖
Oh and not to forget yesterday Mario kart 64. 1st on the finish and then the system chrased 😆🤣. Nintendo 64 is my retro fav, I must fix this!
Hello, in Emuelec 4, a folder for game images is created automatically, but in 3.9 there is no way to make this folder (there are not only games there)
The games are there, but it's on a partition so Windows cannot access. Copy over games using network - ruclips.net/video/m33sCMju4jM/видео.html
Hi all i have a powkiddy y6 game stick. I backed up everything to my mac. Wanted to add games and now no games are showing on emulec menu. I only formatted the roms partition as it had no space to add games. Other partition is emulec with the software files. Now when I load the y6 no games are showing on emulec at all. I dont know how to find the scan game list section on emulec if thats the way to do it? Please help! 🙏🏿
gamebox G5 p201 dtb.img hardware amlogic ,i cant find it anywhere ,help please
I tried . No pin , reset using the terminal. Libreelec
I tried everything, I even got a new sd card. . Look , I I used another box and worked . This box , x88pro mini is not good . It will now work.
Thanks again for the help .
I did all the things in the video but it just does a boot loop any suggestions?
thanks for the video! is there a way to have the box to give you a choice of going to the emulator or android and another option for netflix and such.
Emuelec is another system entirely. It loads up Linux.
You could go half way and load up a front end to android and have it look kind of similar. Check out daijishiro (I think that's the name)
@@TeamPandory thanks
Hey there do u know why when I put the SD in my computer to load the games on my SD it doesn't show the roms it only shows the d drive that shows emuelec with the files but no roms
Check the video we have on adding games / roms to emuelec.
@@TeamPandory I jave the roms ready but on the SD card when I put it on my laptop it shows the emuelec files but it doesn't show the roms names so o can just drag the file
Hi there. I have followed all your instructions but it isn't giving me a readable partition to put the rooms into. Please help I have tried everything.
After it has run once, a partition will be made. Depending on the version it will be either a Windows readable one, or Linux. In the case of Linux, it's probably better to use WiFi to copy over your games
Thanks for this, how about the other way around, what if I want to boot my Android box then start with Android OS first? How do I get this done? Thank you....
Remove the emuelec microsd- android will boot as default.
What choice did you choose I have the hk1 with 4gb and I don't know which device tree to choose
Hey there what was the device tree again for the hk1 vox
Thank you very much. 👏🏾👍🏾🙏🏾
Hi. I bought a hk1 box. But thought that I would go for the newer android 10 version. After receiving it, realised that it has a different chipset on it. The rockchip rk30.
Is there any way to get Emulec on this box?
Any help would be really appreciated.
Emuelec is exclusive for amlogic chips. You may be able to find something that runs on it, but you'd need to search out the exact chip. Rk30... Um. You may need to check the complete name of the chip.
Oh crap. I thought that might be the case. I think according to Aida 64 the chip may be a rk30sdk or rk3328. Looks like I've got a spare android box. Thanks for all your help.
You could pioneer the rockchip MUB .. give this a try github.com/MattAndrzejczuk/RetroPie-Setup-for-ROCK64-PINE64
On thanks. I'm happy to the this out. I clicked on the link but not sure what to do now. Am I supposed to flash something to SD card like I would Emulec. Could you point me in the right direction.
Thanks
What about USB? I only have USB slots available
When running a mame game that does not work, an error screen appears. How does one exit this screen and return to the main menu? None of the keys on the gamepad work for this, so have to reboot. Also, how does one add a coin? Thanks for your help.😃
Use the select/ start and change the emulator core- keep switching until the game starts. Coin in is bound to SELECT on your pad that you set up through emuelec
@@TeamPandory I used select + start, but the error screen stays and cannot get back to main menu. Using select to add coin also does not work. 😒
@@TeamPandory can I do this from usb rather than micro usb?
@@gup160 yep!
Alguien sabe que imagen es para la s905x3 de 2gb de ram?, es una x96 max plus 5, no he logrado que arranque de la sd, se me va a negro, gracias
hi i bought a chinese tv box with this emuelec on it i changed the resolution to 4k and how it shows as if the new resolution is not recognized and keep looping the same booting image how can i get it back to 1080p or 720p again ? thanx
Search in RUclips : super console X 4k fix
I do everything right for X96 air the box boot but once i take out the usb to put roms on their folders and put it back on the box there's error on Emuelec and it wont boot 😭😭😭
Did you fake check the card?
Did you push yes to format it?
@@TeamPandory played around with DTB files finally i found the one that worked there's little information which one to use for 4GB version of X96 air, when i inserted the usb back on windows after the first boot there weren't an EEROMS partition so windows was just giving me endless errors, so out of luck i tried different DTB files got the one that worked, thanks
Thank you very much for sharing, but when I completed the installation, the memory card capacity was lost so much that I could not copy more games. Please guide me how to fix it.
At a guess, you're referring to the microsd when inserting into a Windows machine. Once emuelec starts for the first time, it creates a Linux partition with the rest of the space that isn't easily accessible in Windows.
In order to copy over games, follow the next video in the series on "Adding Games" ruclips.net/video/m33sCMju4jM/видео.htmlfeature=shared
I cant understand - what magic you need to do to connect some controllers to Emuelec, i searched for ours and can't fing an answer (in my case Ipega 9156 gamepad)
Same as any system. If there is no compatible driver, it won't work. Why not drop by the emuelec discord and ask them there, they may be able to help you out.
I'm having trouble with other controllers, I've tried mapping out the buttons for three different controllers and the button layout is all mixed around during gameplay. Which is odd because the controllers the console comes with on my device don't do that. What is wrong with using other controllers? I even mapped out the buttons and they are all mixed up during gameplay....?
Try this ruclips.net/video/1N6t6X3CyJM/видео.htmlfeature=shared
Hi! Does it work with mecool km2? Thank you!
More than likely not. Mecool tend to use the newest security, Netflix google bits, so no booting off the microsd.
Thank you for this helpful video! Works perfectly on my TX3. But, is there any other way to switch between Android and Emuelec, instead of inserting and removing sd card? Something like Windows/Linux dual boot.
It's pretty much the same as a windows Linux dual boot... Having them on the same drive is a nightmare - keeping them separate ftw ;-)
But yeah, I see what you mean - don't want to be missing taking out the microsd etc... And the answer is, not that I know of. I'd just settle for emuelec for retrogaming and android for random bits -most the time it's set to emuelec.
@@TeamPandory Fortunatelly, there is an option in Emuelec Quit menu. Reboot from nand should be selected, and next reboot it will go directly into Android, that can be operated by remote. On next power on, Emuelec has boot priority again. Anyway, thanks for your reply and previous work. A week ago, I knew nothing about all of this. Greetings from Serbia!
What Format does the Sd Card Have to Be in???
It’s x88 pro mini . It runs Android 10. The box is fast. It seems all the dtb files are not for this box.
I tried 905x2 , 905x . All of it. It goes to recovery mode. The box won’t read the IMG FILE. I gave up. I bought a h96 max. It works and I recommend it.
I've found that the Android 10 boxes usually sport the Allwinner chips, vs Amlogic who usually reside on Android 9. One more thing to look out for is "netstreaming", "netflix" or "Google Certified" - avoid those if you want to use ELEC
Ok so I am really really struggling. I’ve managed to flash my sd with 3.9 no issue, I cannot for the life of me work out the correct file for the dtb files, when using terminal I have a38@p201 come up (missing a couple of digits left as resolution is out a bit). My box is running. P201 with 1gb ram and 2ghz speed. Every dtb file I check and try just boots on infinite loop with the tv splash screen. Getting so so frustrated
Which version did you try and flash? And what box are you trying this on?
Same happening with me
@@TeamPandorymine.. I don't know the box I buyed was gamebox g5 from flipkart
Using a hk1 max box cant find my amlogic info anywhere on this thing
The hk1 max is running on the rockchip. They are incompatible with emuelec. Only amlogic chips are supported.
Hi Great video, but I am having major problems, my H96 max say disk safely ejected, every time I insert my SanDisk ultra micro sdxc uhs1 card. Any ideas please as I just can't solve it?
Sounds like a usb microsd adapter issue... Try another one ?
@@TeamPandory Hi, it turned out to be sd card was formated as exfat, so I formated it to fat 32 and it works fine, my only problem is I can't see my chipset in the emuelec, rockchip RK3318 4x arm cortex 53@1104 mhz
@@MsLostboysforever Emuelec doesnt support Rockchip, sorry to say. There may be an alternative though, have a look on the google.
@@TeamPandory hi thanks for that, its a minefield finding one thats supported!
Games is in the same image? Or i have to download is separately ?
Emuelec has no games on, perhaps some freeware. You need to add games yourself.
@@TeamPandory ok. Where can i find games?
@@narcsoul Look around the Internet ARCHIVES .. I'm sure something will show up ;-)
Thanks Bro It Worked
Good to hear! :D
Would this run on a Amazon fire TV cube???
I don't own one, so can't tell you for sure. However, you could try that boot to libreelec file in at around 8 minutes. Got a feeling that these Amazon devices cannot be rooted - so no emuelec.
What was Aida64 for though?
Aida64 is a tool to find out your spec. It checks what processor is being used and memory, so we know which version of emuelec to install.
where can I get to download the appropriate games and bios that supported by emuelec 4.5
You're going to have to look for them or extract them from the systems themselves. For obvious reasons we cannot share them.
Hello, I hope you can read my comment. When I use terminal emulator and enter cat /proc/device/-tree/amlogic-dt-id commands, I get the error No such file or directory.. what should I do? Features of the device I used gamebox g5 p201 amlogic board 4gb ram. I can't find compatible device tree.
You can always just guess if you know the product chip / spec.
Check the coreelec /libre elec dtb list- there's a website
I have the pawky box, accidently formatted the sd card... Ran through the steps and mine said p242_1ghx_s905x but didn't find that in the list! Any suggestions? It has 1gb of ram so obviously I want to go with the 3.9 but what dtb file should I use... I was also attempting to install a version of batocera or retropi just to see if it can be done. Now I believe that retropi doesn't support amlogic processors so that most likely is out the picture!
Pawky box should be very similar to either the super console x or x pro regarding the dtb.
@@TeamPandory ok I give it a try!
@@TeamPandory found a video on restoring the Super Console x, they provided a link to restore files that had three different dtb imgs... When I burned the 3.9 generic image to the sd card it made the partition primary and for some reason my Windows 10 Alienware laptop would not bring the partition up so I had to go in mini partition tool to change the partition to logic to gain access to it.
Then I copied the dtb.img for console x 905L chip to the sd card and at first it didn't work. I went back into mini partition tool and change the emuelec partition to primary again and it loaded emuelec. Now the regular dtb.img that the video I found directs you to just might work as well. Now on to getting games back on to the system... I am going to make a video on my channel to document my issue and the solution.
Ironically glad I accidently formatted the sd card because I am learning things that most tutorials don't teach you when burning the image to the sd card. Ton of time devoted but well worth it. Thanks for the suggestion and sorry for the long comment.
@@Wedeemgaming your laptop / windows laptop won't read the drives as they're Linux partitions per default. We made a separate tutorial regarding installing emuelec and games, demonstrating how to use the official image rather than the hacked versions.
With a bit of spit and elbow grease, you are able to make an even better emulation base than the original one you got with the system.
Do I need to have a rooted device in order to install and use Emuelec?
I have an X88 Pro 10 (RK3318) and I cant find which file I have to use in order for my box to work for Emuelec. Please help.
Your chip / board isn't supported . It's a rockchip not an amlogic.
@@TeamPandory Thanks for letting me know. I returned that box to amazon and now got a Transpeed S905x4 box. Is this Amlogic supported? and which file do I use?
@@sdot-fn8ce android 11? Usual s905x4 don't work as they lock down the boot loader. You might luck it out by using a 905x3 dtb file.
We made a best box for emuelec video that ranks each one we've tried. Check that if you're having issues
Yeah I'm about to order the s905x3 I just found out the x4 doesn't work with it so I'm taking that back and getting the 3. Thanks for your help!
I have the new EmuElec 4.0 for my Super Console X pro(thanks for the great tutorial, btw!), but I can't figure out if it's using Duckstation as the default PSX emulator. I want to switch it to that. How do I know which Emulator it's using for which system and where do I go to change that? Thanks and sorry for the trouble
Hey there. I'm pretty sure epsxe is default- to change, enter the PS1 game menu then push select > advanced system options > change emulator here
@@TeamPandory Thanks. I appreciate it
It's work in non rooted devices?
I've installed the 3 files on my HK1 4GB box, flashed the SD card with Emuelec 4.0, but when I reboot using Libreelec, it hangs on a solid blue screen. Any ideas? thx! your videos are great!
I should add, that the same thing happens using Terminal
it eventually goes to an Android Recovery screen Amlogic/u219/u219 something like PPR1.189519.911 user/release-keys User volume up/down...and below there is a menu to reboot, delete partitions, etc...
@@lesliecheung7877 could be a few things. First can you verify the android version it's running, and the cpu / memory with aida ? If it hangs on a hk1 screen then you'll either have a microsd or incorrect dtb issue.
@@TeamPandory ok thx! Android version is 9 (Pie). Amlogic S905X3 4G Ram. I will check another microsd card. franklin board/platform/device/product
@@lesliecheung7877 the dtb should be 905x3 4g 1gbit then. If that doesn't work try 2g version. It could be that the ram configuration of your system doesn't get along with emuelec.
How to put games on the emulator??
HELP!
I have a S905W2 and with Aida64 I get "oppen" as device tree(don't know what that means). So I went with the emulator and it said the device tree is "s4_s905w2_ap201_4g" which is very similar to the one on the device trees website.
My question is, which version of Emuelec should I use? I have tried the 4.6, 4.0 and 3.9 but none of them have that device tree that I could use as a "dtb.img" file
3.9 or earlier for your box. You need to use the file that does NOT have NG (new generation?) in the filename
@@TeamPandorythanks for the tempestive reply!
I am sorry to ask for help again, but I can't seem to find my device's device tree in the 3.9 version.
Do I just have to try every single one until I find the correct one or do I have to try an older version?
i have H96max 32gb 4gb and sm1_ac213_4g , after 5sec emueelec logo, reboot and black screen . I tried some dtb but nothing works
Maybe try a different monitor? I think some boxes have issues with 4K televisions, which may need sorting by setting video settings for 1080p in Android.
Ok i try it after work. But i have one more question. There is no dtb.img file in NG version, its normal?
@@grtace350 there should be many in the devicetrees folder. Take one then rename it to dtb.img
I want to exit emuelec to return to the default program, what should I do? Will I lose the default program of the tv box when installing Emuelec?
EmuELEC is installed to the microsd separately to the TV Box software. Unplug the microsd and turn it on, then you'll have Android. You won't lose anything.
@@TeamPandory I can't find dtb of H96 Pro + don't know which version of Emuelec it is located in? Help
@@MarioTran2307 if it is the one with the s912, then you'd need to use emuelec 3.9... check the emuelec GitHub page and it says something about the s912 on the release page. Grab the generic.
Hii´! I have a gamebox from Ali Express, SD was destroyed. Can you help??
SD Cards from these cheap boxes can be fake spaced- of be of poor quality. You may be able to follow this guide to get it working again.
@@TeamPandory thanks Mate i will give it a try. Only Problem Here is what is the right Image for the Box ? Its running Android 9 on an ame o guess.
Hey guys. I have an X96 Air TV box coming in. S905X3, 2GB RAM, 16GB ROM. One thing I didn't notice when looking around was that these boxes claim to only support 32GB microSD cards, 64GB sometimes, I reckon. Have you guys tried putting in a 128GB or 256GB microSD in these boxes? Thanks.
We've got a 128gb working in the makeup box.
@@TeamPandory oh ok thanks dude. I hope I get my TV box going with few hurdles. Been playing around with Emuelec before I ordered it.
I did it!! Installed Emuelec 4.0 on an X96 Air TV box with 2GB of RAM!! 😍 Plays very well!! Thanks for your help, bro!! 🙏
@@ronch550 Yeah! Great work!
@@TeamPandory btw dude didn't you put out a package for EmuElec 4.0 called EmuChicken pack or something? I downloaded it some time ago but I can't remember what to do with it lol.
Can we do it with usb instead of micro SD? and How can we check the spec of H96 Max 8K ultra HD android box?
Do you have the H96? - Try it with the usb- I think you may be able to boot it up - but USB ports are not exactly numerous
When I flash Emuelec on to the SD card I end up with a few partitions that cause an error on first boot of emuelec... Any ideas??
What error
?
@@TeamPandory Its ok, have it sorted. Thanks
This is very awesome I'm wondering if I can do this to my Nvidia Shield and use my USB for my games and use the SD card to boot this or any of these possible
I have a two terabyte hard drive with games on it and I've been using nothing but ROMs and emulators but I wanted something nice like this instead
I think the closest thing to this on a shield is the dig frontend. Emuelec's strongest supported soc is the s922x.
How to add games?
Can you do one for google chromecast 4th gen with google tv?
Hey there on the mame roms do you have to unzip the files
Please check our other video on adding games. Mame roms always stay zipped
@@TeamPandory thanks
I have X88 PRO Mini
Sm1_ac214 4g
What’s the correct dtb file ?
Thanks
What did the system spec give you? 905x3? I assume you'll be working on with sm1 905x3_4 .img
@@TeamPandory that is indeed the one, I have an x88 pro mini as well.
May I ask which chip Amlogic S912 vs S905x3 and Gpu T820 vs G31 is stronger? Thank you
905x3 is much newer and would be the preferred option.
So this is dual boot. Is there a way to format entire android tv, so it is just emuelec?
Might be possible. Dave wants to do just that- will get back to you if he is successful
dear friend i do all your steps but the tvbox stay at android logo
There is a chance that your device is not compatible. You may need to contact the developers in the official emuelec discord group for more help.
@@TeamPandory i try all dtb my dtb is p218 not like on device information ...thanks alot....can i get the games at ones
I have an Easytone T95 android box. 4Gb RAM and 32Gb ROM. Can you tell me please which version of LibreELEC I need to find and which version of EMUElec would be best?
Isn't the t95 now an android 10 box running a rockchip ? That has no emuelec support
@@TeamPandory I know it uses an ARM chip somewhere.
@@TeamPandory SO used AIDA64 as shown in your video. It has an exdroid board, Walleye is the device with 4Gb RAM and the GPU is Mali-G31. So have I bought a box that isn't supported? if so who do I contact to see if they wil try and include support for this box?
@@AmbersKnight If it's the T95 that you mentioned earlier, then it's a Rockchip. Those boards simply don't work with software that is specifically designed to be used with the Amlogic family. It's like trying to get a PS4 game work in an Xbox360... Not going to happen.
@@TeamPandory I see. I have went a slightly different route and downloaded RetroArch64 instead as I think that one has more chance of being compatible with my Android box. Thanks for the advice though, I do appreciate it.
Great tutorial !
Hi..its works with usb too??
The terminal shows device id:
sm1_ac214-4g
I tried 905x3 4g and didn’t boot .
Could be a few reasons. 1. Did boot to libreelec run ? 2. Have you tried another microsd ?
You can either hold the reset button when you power it on while having the SD card inserted (the reset button is inside the headphone jack, I just used a q-tip that I snipped the end off of, the hollow ones will not work). Or you can use libeelec that you can sideload.
I did everything from this video, but nothing happend. It boots to regular android after i run libreelec.
Sorry to hear that. It doesn't work with every android box (only amlogic with an unlocked boot). If you wanted any help you'd need to share some more information about your system or this post is nothing but hot air.
Hey there wanted to know if u can help me..on emuelec 4.0 the n64 lags on most game do you know why and what I can do to fix that
N64 is and always will be hit and miss, depending on the game you play. Mario and fzero lighter than banjo, cruisin etc.
If you want all n64 working, your choifes are either to invest in a pc, or n64.
Awesome!
my dear friend my balenaetcher not open still white screen can i use other app
You could use win32imager, but it isn't as user friendly
@@TeamPandory what about rufus
@@wa7eedov I use Rufus to format / wipe cards primarily... Maybe you can use it for burning emuelec though.
@@TeamPandory i will try 32iamage because u are know / im so thankful to you dear
I cant even get to the sd card....this box has superuser...so idk anymore
My HK1 box is a 905X3 4GB. What device tree should I use?
Explained in the video. Sm1_4gb or something similar.
@@TeamPandory Thanks! I also watched the eta prime video and figured it out.
Reboot to emuelec always goes to a black screen. I have tried every sm1 905x3 and its always the same. Is there another way to make it work? I try many things but Never works.
Trying to save up for another box maybe but I have nothin right now
Thank you!