Thanks for the video. I just did the job. Would like to add that its best to slightly screw the top 2 screws into the heater core before sliding it back in. Then slide the black tube into those open face holes and put a bottom screw in. Then tighten them. Also anyone doing the jib should order the core with gasket included.
thank you for making this video. im getting ready to change my heater core in my old frontier. I always like to know if there's going to be any surprises.
@@ChristmanGarageI e been putting mine off for several years but you just made this a breeze. My a/c is going out intermittently as well. Should probably consider replacing the compressor while I’m at it? (I’m assuming it’s the compressor)
yes you are correct some of them are too large on the ends, I get most my heater cores from O’Reillys and they sell “Murray heater cores” the Murray one was a perfect fit👍
@@ChristmanGarage thanks, just completed this job on a 2002 pathfinder with the 3.5 liter. I used the Frontier “Murray” core from Oreillys. The pathfinder core has fixed aluminum tubes that don’t allow replacement without removal of the entire dash. By cutting those off, using the Frontier style core and replacement plastic style tubes I was able to replace with removing the entire dash. It does require massaging the heater hoses.
@@whamo1966 You meant you removed the entire dash,or NO removed the entre dash,I have same vehicle as you and I was thinkin to replace heater core,thanks
@@DavidHernandez-ue4fz I did not remove the dash but I had to cut the old heater core tubes off to remove it. I installed the Murray Frontier core with new outlets. The heater hoses and the firewall grommet don’t fit that great but it works. FYI, you need the heater outlets (tubes), seals, and screws.
Before i had my recovery machine, i went to a shop that did all my ac charging. I would bring a car to them, they would vac it down for me. I would do the repairs and then bring it back to recharge the a.c.. They would only charge me for a standard a.c. charge.
After watching your video I’m going to have a better time doing it. thanks bro!
Great video, and thanks for calling out the socket size.
Thanks for the video. I just did the job. Would like to add that its best to slightly screw the top 2 screws into the heater core before sliding it back in. Then slide the black tube into those open face holes and put a bottom screw in. Then tighten them. Also anyone doing the jib should order the core with gasket included.
Awesome! Thanks for the comment
Hi christman! Was doing a knock sensor job and broke the old plastic tube off. Thanks for the save
Awesome!👍
Thank you for posting! Need to get to working on mine!
Thanks for the comment👍
thank you for making this video. im getting ready to change my heater core in my old frontier. I always like to know if there's going to be any surprises.
Glad I could help
@@ChristmanGarageI e been putting mine off for several years but you just made this a breeze.
My a/c is going out intermittently as well. Should probably consider replacing the compressor while I’m at it? (I’m assuming it’s the compressor)
Excellent thanks for showing this. I have the same problem on my d22 Navara 2003 2.5d.
Great to hear!👍
Good job i learn so much and i can do it and save Money thanks bro
Is this the same for a Pathfinder of similar age? VQ 3.5L engine...
Highly likely if the dash is designed the same
Did you replace it?
Awesome man. Thank you so much for this.
Happy to help!
Thank you very very very much, you save the day brother
Happy to help👍
Are 2015 frontiers the same?
Is it the same for a 2000 frontier??
What brand heater core did you use? I understand that most aftermarket cores are too thick on the tank ends to install this way.
yes you are correct some of them are too large on the ends, I get most my heater cores from O’Reillys and they sell “Murray heater cores” the Murray one was a perfect fit👍
@@ChristmanGarage thanks, just completed this job on a 2002 pathfinder with the 3.5 liter. I used the Frontier “Murray” core from Oreillys. The pathfinder core has fixed aluminum tubes that don’t allow replacement without removal of the entire dash. By cutting those off, using the Frontier style core and replacement plastic style tubes I was able to replace with removing the entire dash. It does require massaging the heater hoses.
@@whamo1966 thanks that’s good to know👍
@@whamo1966 You meant you removed the entire dash,or NO removed the entre dash,I have same vehicle as you and I was thinkin to replace heater core,thanks
@@DavidHernandez-ue4fz I did not remove the dash but I had to cut the old heater core tubes off to remove it. I installed the Murray Frontier core with new outlets. The heater hoses and the firewall grommet don’t fit that great but it works. FYI, you need the heater outlets (tubes), seals, and screws.
It's a lot of work, how much do you charge to do a job like this, thanks, good video
Any idea if a '98 Pathfinder would be similar?
If the dash looks the same on the outside it is highly likely
Thank you for your help this video is very helpful..
Glad it was helpful!
Any chance this procedure is the same for a 2017 Frontier?
I doubt it I did a newer model a few years back and I had to remove entire dash😥
Entire dash
Would this be the same for an 02 xterra?
I’m not sure but if the dash looks the same on the outside it should be👍
Dang my heater hoses in engine bay broke because how old they are might give this a try tho
Thank You plenty
thank you sir.
Evacuate the A/C? You said this was easy DIY
Yeah that’s the worst part but not bad at least you don’t have to tear the entire dash apart👍
Before i had my recovery machine, i went to a shop that did all my ac charging. I would bring a car to them, they would vac it down for me. I would do the repairs and then bring it back to recharge the a.c.. They would only charge me for a standard a.c. charge.
#book get er done!!!
1994 nissan hb stock 5 speed will trade for fronteir
1984 king cab 5 SPD, will not trade for anything.
I guess your clutch doesnt rattle on each gear change@@danielescobar7618
En donde lo en cuentro
🍀☘️🌟⭐🌟⭐⭐👍
🫡
is this the same for the 2012 Nissan frontier?
I don’t think so