2016 Firework Finale Board

Поделиться
HTML-код
  • Опубликовано: 11 сен 2024
  • Consumer Firework Finale, Backyard Fireworks

Комментарии • 111

  • @RH-ib7bg
    @RH-ib7bg 6 лет назад +13

    Your fuse timing was perfect. I need to take notes. Lol. That was way better than I thought it was gonna be. Looked like way more in the sky than what was on the board. Nice

  • @preppychrisbou
    @preppychrisbou 5 лет назад +6

    Actually this is a great firework show on a budget. Quite powerful and elegant, well done.

  • @rightprivilege
    @rightprivilege 4 года назад +2

    That’s the best timing for the final shots I’ve seen in any of these backyard vids...good job!

  • @Knoxcicero86
    @Knoxcicero86 2 года назад +1

    This is dope for being only a few fireworks I've seen many videos with more cakes but it's not what you do it's how you do it!!

  • @ibarrawbjr19
    @ibarrawbjr19 4 года назад +3

    The timing of the fuse was perfect

  • @Skaterfreak111
    @Skaterfreak111 6 лет назад +16

    That whole thing was like a finale!!!

    • @preppychrisbou
      @preppychrisbou 5 лет назад +3

      Lets say it was a firework show on a budget.

  • @ts89540
    @ts89540 7 лет назад +7

    That's just finale? That's more than my whole show. Nice work!

  • @ghosttheone007
    @ghosttheone007 3 года назад +1

    That open fire is one of the best cake I brought last year

  • @RocketBurn11
    @RocketBurn11 7 лет назад +8

    I'd be proud of that show, well done!

  • @kirinchao
    @kirinchao 6 лет назад +11

    haha, i saw our product, "open fire", i am working for brothers pyrotechnics and i hope you enjoyed our product. thank you for purchasing our items and hope you will check out our 2018 new products. :D

    • @JusticePyro
      @JusticePyro 3 года назад

      I love brothers pyro 🧨 if u take a peek at my stash I love the brand and always has good stuff never dissapoints, I got a cakes by em one called Stop N Go and one Magnificant festival and they were really nice high in the air no fire risk big breaks I loved it. I also for new year bought 2 boxes of the quest canister shells and there super loud super big 10/10 recommend 😊

  • @S_Carolina_Pyro864
    @S_Carolina_Pyro864 5 лет назад +2

    Very nice board man👍🏾👍🏾👍🏾💥💥💥

  • @melvinspringer5486
    @melvinspringer5486 3 года назад +1

    Fuse timing on point! Great job 👍🤘

  • @alfredtorres3913
    @alfredtorres3913 4 года назад +1

    Nice show, I’m sold on Open Fire now

  • @james84buddah
    @james84buddah 6 лет назад +2

    I was looking at setting up a small show for a party. Your board set me in the right direction. I loved your display and great job. Hope mine can go as smooth.

    • @bsblplaya3
      @bsblplaya3  3 года назад +1

      I used “liquid nails” to glue the firework cakes to the piece of plywood and the tape was just regular masking tape. Any tape that sticks enough will work- the green fuse will burn right through it. The timing is the tricky part but I burned 1 foot of the green fuse to time how long that takes to burn per foot. Then I watched each firework cake on RUclips videos to see how long each one lasted. Then I did the math for how long the green fuse needed to be in between each cake based on that timing. But always do a little shorter fuse than the math shows so their isn’t a dead spot with no fireworks going on. I would rather have the next cake start early than start late and be no fireworks for a bit

  • @fijiantraveler5278
    @fijiantraveler5278 4 года назад +1

    impressive set up! I totally under estimated it

  • @ninjagodzilla6402
    @ninjagodzilla6402 3 года назад +1

    I have to say.that was very impressive.probly the best i ever saw.i am going to make my first "finale" board this year.that gave me hope lol.almost time again!!! Thanks for the entertainment.

    • @bsblplaya3
      @bsblplaya3  3 года назад +1

      Thanks! I used “liquid nails” to glue the firework cakes to the piece of plywood and the tape was just regular masking tape. Any tape that sticks enough will work- the green fuse will burn right through it. The timing is the tricky part but I burned 1 foot of the green fuse to time how long that takes to burn per foot. Then I watched each firework cake on RUclips videos to see how long each one lasted. Then I did the math for how long the green fuse needed to be in between each cake based on that timing. But always do a little shorter fuse than the math shows so their isn’t a dead spot with no fireworks going on. I would rather have the next cake start early than start late and be no fireworks for a bit

  • @tonetone111222
    @tonetone111222 Год назад

    You timed this cakes nicely! Great job

  • @Ohio612E
    @Ohio612E 7 лет назад +7

    Awesome. Couldn't have been timed out better

  • @ryannewyspyrotechnics2421
    @ryannewyspyrotechnics2421 2 года назад

    Well done for a budget firework show I already have one open fire left it’s also go by they also goes by crossfire but now I gotta pick up another one just by watching this video and fighting rooster awesome nice little show man keep it up brother have a good day

  • @heatherbrant6486
    @heatherbrant6486 3 года назад +1

    Nicely done. Thought for sure we would see them all go off relatively the same time but you know what’s up..

  • @MedicatedSasquatch
    @MedicatedSasquatch 7 лет назад +9

    Hell yeah! Ended just how you wanted!

  • @assortedeffects
    @assortedeffects 4 года назад +1

    Great timing and selection - looked great!

  • @m_z_a_w_c4471
    @m_z_a_w_c4471 5 лет назад +1

    The timing you had on that was amazing!

  • @tejaymoore7175
    @tejaymoore7175 6 лет назад +1

    Tip: cut the paper off that covers the top of the tubes so they shoot higher

  • @dskokos77
    @dskokos77 4 года назад +2

    Open Fire has a great finish, great strategic placement.

  • @PYROKAYO
    @PYROKAYO 2 года назад

    Fused that perfectly some how! Turned out great

  • @KentAndrewLang1967
    @KentAndrewLang1967 6 лет назад +9

    That was nice. I can rarely get mine to end like that.

  • @richylast4465
    @richylast4465 6 лет назад +2

    You killed it bro good stuff

  • @marko1779
    @marko1779 6 лет назад +3

    Awesome finale 👏🏽🙌🏽. Great fireworks

  • @pyroking5702
    @pyroking5702 7 лет назад +12

    Great finale for a small board bro 👍

  • @PyroWorks365
    @PyroWorks365 4 года назад +1

    Absolutely great work!

  • @darknessfalls1956
    @darknessfalls1956 7 лет назад +8

    nice low cost board perfect fusing

  • @StrykeZone2023
    @StrykeZone2023 4 года назад +1

    Come back every year.

  • @B1GJOHNSTUD
    @B1GJOHNSTUD 6 лет назад +4

    damn that shit was lit af!!

  • @OriginalCoastalDistancing
    @OriginalCoastalDistancing Год назад

    That was actually very well done! Great finale too. Very nice job.

  • @jyienger
    @jyienger 6 лет назад +2

    Awesome little board. I prefer having periods with single cake action where you can see each effect. I don't like the constant sky puke action with five simultaneous cakes going at the same time the whole show- thats cool for the last minute.

    • @mattleese7764
      @mattleese7764 6 лет назад

      cool for you, now you can join the rest of the 1% of the worlds population who likes boring, bland, tasteless, slow, small budget firework shows

  • @lonzyrt7351
    @lonzyrt7351 2 года назад

    One hell of a finale.... thanks for sharing

  • @americanminer1965
    @americanminer1965 3 года назад +1

    Great choice of cakes 5 years later 😆

  • @Christopher-vx1cx
    @Christopher-vx1cx 7 лет назад +2

    Fuckn sick bro ! 👌🏾I got two open fires, an October fest. And two medalist. Should be fun

  • @victorlopez6081
    @victorlopez6081 6 лет назад +1

    Badd Ass Set Up Brother !!!

  • @joeestes8114
    @joeestes8114 5 лет назад +1

    Nice show!

  • @CommanderClank
    @CommanderClank 2 года назад

    Really nice pacing from start to finish

  • @donshishido
    @donshishido 7 лет назад +5

    That was a bad ass display!

  • @J.Garner88
    @J.Garner88 5 лет назад +2

    Got kind of slow in the middle but the ending was very strong

  • @3ccdmike
    @3ccdmike 7 лет назад +1

    THAT ...WAS...SWEET !

  • @wardor9214
    @wardor9214 6 лет назад +1

    Very nice job! Good variety.

  • @hennnseyxo1813
    @hennnseyxo1813 5 лет назад +1

    Nice set up i wanna learn how to do that

    • @bsblplaya3
      @bsblplaya3  3 года назад

      I used “liquid nails” to glue the firework cakes to the piece of plywood and the tape was just regular masking tape. Any tape that sticks enough will work- the green fuse will burn right through it. The timing is the tricky part but I burned 1 foot of the green fuse to time how long that takes to burn per foot. Then I watched each firework cake on RUclips videos to see how long each one lasted. Then I did the math for how long the green fuse needed to be in between each cake based on that timing. But always do a little shorter fuse than the math shows so their isn’t a dead spot with no fireworks going on. I would rather have the next cake start early than start late and be no fireworks for a bit

  • @assslammer3577
    @assslammer3577 5 лет назад +1

    Great job 👍

  • @phildasky8668
    @phildasky8668 6 лет назад +1

    That was nice and well timed bruh! Good job 🖒🖒

  • @javir209
    @javir209 4 года назад +1

    That wuz dope pyro

  • @rolandomota9111
    @rolandomota9111 7 лет назад +3

    that was sick bro..good stuff!

  • @asies...859
    @asies...859 6 лет назад +3

    That was sick
    ... 🖒🖒🖒

  • @zello1981
    @zello1981 7 лет назад +3

    That shit was sick, nice job

  • @KingCraw
    @KingCraw 8 лет назад +3

    Nice Board....Subed and liked

  • @angelolucero7780
    @angelolucero7780 7 лет назад +1

    need to do three of those 96 shot.... they shoot off rapidly makes it more faster I did this but with 3 and it was cool

  • @jeffkyle6207
    @jeffkyle6207 Год назад

    Awesome! Nice job!

  • @djpeteyc
    @djpeteyc 6 лет назад +1

    Well done man!

  • @Ardie1962
    @Ardie1962 7 лет назад +3

    Nice finish!!

  • @NNATrevor
    @NNATrevor 6 лет назад +1

    That really timed well. Couldnt have done better myself.

  • @KPYRO412og
    @KPYRO412og 7 лет назад +4

    Very nice finale

  • @Twotimepyro
    @Twotimepyro 11 месяцев назад

    Yep. I’m just going to agree with all the comments before… great job 👏

  • @pyro365ss6
    @pyro365ss6 7 лет назад +4

    Nice finisher

  • @traviswetherbee9151
    @traviswetherbee9151 5 лет назад +1

    That was awesome! Is that a 4x4 board?

    • @bsblplaya3
      @bsblplaya3  3 года назад +1

      Sorry for the delay-I can’t remember the size but a guess would be about a 4’x4’ board yeah

  • @mateckz
    @mateckz 5 лет назад +1

    This was super enjoyable to watch! Great job man, I’m just starting to get into learning how to put on better shows. What that run you?

    • @bsblplaya3
      @bsblplaya3  3 года назад

      Sorry for the delay- this was about $240 in fireworks in 2016

  • @Mrimpact2011
    @Mrimpact2011 4 года назад +1

    Very nice...is there a 2020 version........

    • @bsblplaya3
      @bsblplaya3  3 года назад

      I haven’t made one since then but when I do again I’ll try and post one!

  • @russellsmalls318
    @russellsmalls318 7 лет назад +3

    damn.... great show

  • @lacarlousjackson8
    @lacarlousjackson8 4 года назад +1

    Love it!!!!!’

  • @JuanSanchez-nc3ik
    @JuanSanchez-nc3ik 6 лет назад +1

    damn that was fucken dope lol i need to try this...

  • @BigAs918
    @BigAs918 7 лет назад +3

    great job

  • @pyropetey4983
    @pyropetey4983 4 года назад +1

    Almost timed it perfectly pyro hard with fuse to get exact timing
    But well done pyro

  • @OriginalCoastalDistancing
    @OriginalCoastalDistancing Год назад

    Nice job.

  • @FaithMuzic
    @FaithMuzic 3 года назад +1

    What tape did you use for this… and how did you hold the fire works down?

    • @bsblplaya3
      @bsblplaya3  3 года назад +1

      I used “liquid nails” to glue the firework cakes to the piece of plywood and the tape was just regular masking tape. Any tape that sticks enough will work- the green fuse will burn right through it. The timing is the tricky part but I burned 1 foot of the green fuse to time how long that takes to burn per foot. Then I watched each firework cake on RUclips videos to see how long each one lasted. Then I did the math for how long the green fuse needed to be in between each cake based on that timing. But always do a little shorter fuse than the math shows so their isn’t a dead spot with no fireworks going on. I would rather have the next cake start early than start late and be no fireworks for a bit

    • @FaithMuzic
      @FaithMuzic 3 года назад +1

      @@bsblplaya3 Awesome, Thanks for the feed back and reply 🎯

  • @SrgDics
    @SrgDics 7 лет назад +2

    Ask how much that costed? And what state thanks

    • @bsblplaya3
      @bsblplaya3  7 лет назад

      This was about $270 for the fireworks not including the wood board or the fuse. All of this was bought in Missouri and Kansas

  • @wallacedooley2797
    @wallacedooley2797 2 года назад

    what was the cost of all those

  • @nosnitchpyro8026
    @nosnitchpyro8026 3 года назад +1

    You are getting way to cozy with a small assortment of fireworks. You would have cocoa by the fireplace with warm socks on if you had some real product you can;t just get anywhere.

  • @Pyroethics
    @Pyroethics 8 лет назад +3

    not bad the 96 shots kinda didnt fit in the show overall it was decent. subbed and liked

    • @rockbandgamer
      @rockbandgamer 6 лет назад +1

      Should have been less fuse between the 96 shooter and the next cake, but overall it was a fantastic setup for the fuse timing.

  • @RobertDickens2002
    @RobertDickens2002 7 лет назад +1

    hard to believe all of that come out of that small board

  • @dynamite5769
    @dynamite5769 2 года назад +1

    What kind of fuse did you use?

    • @bsblplaya3
      @bsblplaya3  2 года назад

      It's called "visco fuse." You can buy a roll of it online or sometimes at a building/tent that sells fireworks

  • @westexascaser4324
    @westexascaser4324 7 лет назад +1

    badass

  • @patdoc
    @patdoc 7 лет назад +1

    can the fuse go through the tape?

    • @therussiantrash832
      @therussiantrash832 7 лет назад

      Docerty yea

    • @tiredoldman5329
      @tiredoldman5329 7 лет назад

      Fuse can go through just about anything.

    • @bsblplaya3
      @bsblplaya3  3 года назад

      Sorry for the delay- yea it can go through tape! Some green fuse can even keep burning when it’s in a bowl of water since the oxygen burns inside the fuse. Try it with a green fused black cat or other green fused items

  • @rubenSanchez-ng7wh
    @rubenSanchez-ng7wh 5 лет назад +1

    Bad ass

  • @mr.kickback7638
    @mr.kickback7638 5 лет назад +1

    SHIT YEAH BRO! I LIKE I LIKE!😃😃😉😄😃 GONNA MAKE A COUPLE 4 NEW YEARZ YO. GONNA GO 2 RED APPLE AND GET COUPLE OF CASES😃😃😃😃

  • @Twiistedpyro
    @Twiistedpyro 6 лет назад +3

    Yahtzee LOL

  • @tiredoldman5329
    @tiredoldman5329 7 лет назад +1

    bite your tushy. lol. never seen that one

    • @tiredoldman5329
      @tiredoldman5329 7 лет назад +2

      PS.. Perfect timing. Great Job!

    • @bsblplaya3
      @bsblplaya3  7 лет назад

      Thanks! It took a lot of time watching videos on YoutTube to find out about how long each firework lasted. Then I did some math to figure out how long to make the fuse for each firework to start before the last one ends.

  • @kenz1031
    @kenz1031 7 лет назад +1

    shouldve quick fused it

  • @dynamite5769
    @dynamite5769 2 года назад +1

    What kind of fuse did you use?

    • @bsblplaya3
      @bsblplaya3  2 года назад

      It's called "visco fuse." You can buy a roll of it online or sometimes at a building/tent that sells fireworks

  • @martinmunoz5306
    @martinmunoz5306 5 лет назад +1

    What type of fuse did you use?

    • @PatrickRedlin
      @PatrickRedlin 5 лет назад

      I used normal green slow burn fuse and then I burned 1 foot of it as a test to see how long it took to burn so that I could do the math for all of it. Here is a link to the similar type of fuse: www.pyroboom.com/product_detail.aspx?ProductID=45&gclid=Cj0KCQjwitPnBRCQARIsAA5n84k3oLM9OTfgrphFbRQEpxrAvFegpKcUiAUvzgYiWgM84UO4N9C-kFkaAn2eEALw_wcB