Having the same sound on my 2016 Sonic 1.8L. Truth is my Sonic had multiple rattles; the right side engine mount was shot, changed all 3 of them. The sway bar links were shot, changed both sides with metal Moog links, oem were plastic😬. All that noise was semimasking this ticking sound. This video may prove to be the answer, saving me $$ and time. Thanks Brotha.
Yep sounds like my problem on a 2013 Honda Odyssey. CV joint. Had the same issue on old Honda Accord. Never had this issue on any other make of vehicle I’ve owned.
My 2001 Lincoln Navigator periodically makes a "CLUNKING" noise when turning left or right (mostly right), usually when in 1st gear while pulling out of a parking spot, or when making a right turn onto a street from a Stop Sign. It can also barely accelerate when it happens, and we've had to have it towed. It feels like riding over a boulder! We've spent nearly $4000. on various repairs to try to fix the problem over the last year or so. The mechanic FINALLY exoerienced the "Clunking" situation for himself today, and said it was the Gear Box. What do you think?
Sounds exactly like what my passenger side 06 ford explorer is doing. Only video I found that showed an example of the noise I’m looking for, thank you.
So hurricane helene hit my area in Gastonia and my car was parked but it was moved by the wind and I went to drive it and it’s making the exact sound! Turn right and it makes the cringing sound so now I know what needs to be fixed that you so much my friend! We’re all trying to recover power came back on y Last night we were 3 days in the pitch black and in some areas like crowders mountain 10mins from me still no power and more areas around me smh it’s been a tough one but thank you for this video much needed #HeleneSurvivor #BlessWNC #Greatful #Thankful
After inspection, CV joint and axle showed no breakdown. With no acceleration or breaking It makes a noise on a slight steer to the right. Sounds like its from the passenger side...2011 Camry LE
I had bought a 2010 jeep patriot and was told it needed the cv axles replaced. I drove it until my new ones came in and it was making this sound after a month of driving it then it would stop then the other day i was on my way home and i heard a different sound, almost like my tire was flat so i slowed down and started looking for a spot to pull over but as i started to slow down it went away so i started to speed up again and it came back, i made it to the house and jumped out to see what was going on and it wasn't my tires so i believe the axle finally gave, so now it's time to finally put the new ones in amd hopefully fixes the issue.
My 95 corolla had a cv joint that came off like an over done turkey leg, once the wheel and hub came off, my guy pulled on the cv axle and it popped off. He had to pry the other end out and had it jacked up high to get under and i lost spme fluid once it finally came loose (domt worry i replaced) that was a fun day lol
Mine... Kind of sounds like that... When i reverse its the worst. The car vibrates a bit too if i go fast... And my key keeps sticking in accessory. Is this connected??
I have a new 2023 Acura Tlx type S after 2 months of ownership when I turned the steering wheel on start up it makes a loud humming noise. But on acceleration the noise disappear. I brought it the dealership and they changed the cable wire the humming noise was fixed but after 3 weeks came hack and its louder. It's in the dealership again right now for fixing 😪. Do you know by chance what's going on with the car? Please reply. Thank you!
Well, I have a Trd Camry and my axle just literally snapped in half but it’s designed to do that I heard? Also, my ball joints snapped in half and I don’t know how else I could’ve happened other than a Potholes but yeah it’s definitely snapped in half hour video and pictures of it. Lol.
Okay, when you're I have a 2014.Ford Explorer, when you're sitting still are going really slow and you turn the wheel.It's making a clicking sound, but when you driving it at 30 to 40 mile an hour, you do not hear It.What could be the problem
It is possible for that to happen. The tall tail sign of a bad CV shaft is a ripped boot with grease leaking out. You could have other issues such as a motor mount being bad, control arm bushing gone bad, or a ball joint going bad too, or even a bearing. I get this question quite often. Maybe today I will make a quick video on how to do to do a rough check on the bearings and ball joints.
My car doesnt clunk but it stutters the turning. If I try to steer sharply on low speeds the car bumbs and after every bumb my steeringwheel gives me some force back
I am not too much up on the Audi drivetrain. But I can tell you about a time when I drove a Ford Mustang with a locked up rear end. It sounds kind of similar. Every time you would try to make a turn the car would hop around and sounded like you were peeling out every time you turned. The sharper the turn the worse it felt. Now I'm not sure if that's even possible on the Audi but that's kind of what I'm hearing you explain.
This is interesting my truck makes a clicking noise while turning right my truck isn't 4 wheel drive so they say it can't be a cv joint they're only in 4 wheel drive. I have a feeling this is what's going on with mine they said there's a tear I'm assuming in that rubber and dirty getting in there
I got a 1984 Toyota tercel fwd yes it helped but there’s still something wrong I was woundering if it would be the sway arm bushing or the control arm bushing. Everything on the cars so old feel free to comment if you got any ideas it all needs fixed anyways
Mines been doing this for like 2months now I jus seen last weekend the problem , what is the part name exactly I have a Lexus LS 430 I believe it’s my rear inner tie Rod correct
This would be more directed to the front of the vehicle. Have you checked to see if you have any bushings on the rear end? I remember back in the Day a customer had a Cr-v , when they turned, it clunked. The rear diff had a rubber bushing on the top. just a thought.. and i know its a cr-v..
15 Dodge Dart is song this but it is when I turn both ways. Is it all one piece or does that mean I have two sides messed up? Sorry if that is a dumb question I’m clueless about cars
Hey I drive a 1997 Ford Explorer XLT and it sort of makes the same noise when I make wide u-turns do you think that could be the same problem with my car and it sounds like it's on the passenger side
I have this problem in Nissan Juke, turning right in slow speed, they do replace my drive axle and alignment it went go away after driving 1000 miles it went back again. With a much louder clunking noise when turning right. Any help what really wrong?
Hi there I have kind of same noise when I turn left but very very tiny. The vehicle was sitting for a while with the previous owner. Do u think lubrication will take it away ? Please reply. Thanks again for your time
@@ashrafsiddiquee3190 if you look at the back of your rim, you should be able to see your outer cv boot. It'll look like a black accordion. See if those are broken and grease slung out of it. Check both sides.
@@ScottiesHobbies thank you for your time and reply. I'm acctueally replacing both CV axles right now. Waiting for my macanic to finish up and call me to pick up the vehicle. Let's see how it is. Hopefully problem should be solved . I'll let you know after I drive the vehicle. Thanks again for the reply
@@ScottiesHobbies thanks i already purchased some tie rods and stabilizer links so will change those first while i get the ball joint and possibly shock mounts.
My wife's vehicle has more of a 'clunk' than a 'click' sound. But I'm going to check this out when she gets home. Thanks for the vid. BTW, is this something that's difficult to replace? Is there special parts required? Should I take it in to a mechanic or can I handle this one?
Motor mounts? Pop the hood. Have some one hold the brake firmly. Switch gears from drive to reverse. Not to fast and do not hit the accelerate pedal. Watch the engine while shifting. See if the motor moves. It should stay pretty firm. If a mount is bad it should rock. Checking side mounts are a little harder to check but can usually be visually inspected. Good luck!!
@@ScottiesHobbies so the mechanic looked at the engine as I shifted with the brake on... he said the amount of engine movement was normal. "there has to be some movement." I mentioned that another mechanic said it could be the motor mount and he said maybe but it wouldn't cause the differential to be out of alignment.... He concluded that it was the differential. its a front wheel drive. He said that there is probably some erosion of the gears and at certain angles and speeds the increased amount of space between teeth causes the ratcheting sound. He said it wasnt the CV assembly. I looked online and saw quite a few people had problems with the transfer case. Basically it being too close to the exhaust dehydrates the grease in the transfer case and it becomes sludge... and or its not watertight and the gears rust... Those seemed to be mostly rear differential complaints. In nearly all the write ups it wasnt specified . But I looked at the transmission fluid and the mechanic did too. He said it was good and that there was no contaminants in it. No metallic pieces I suppose... This was after driving around for a while. Im hoping that I have a good differential and that maybe I can just have the fluid changed or something ... The mechanic said its a normal problem for my car and replacing the differential would be expensive... I may have it done anyway cuz I like the CX9.
Idk why I can send a picture bit you said you never seen a CV axle snap before but my 2000 Acura tl had one of its axles snap into 2 right in the middle. Driving no more then 20 mph amd it skipped like my tires bounced on the road I let go of the gas and slowly pushed it again and it snapped in 2 lol.
Have you taken a look at your CV boots? When you get a chance take a look under the car on the inside of your drive wheels. It's. You should have some rubber accordion looking boots that seal the CV shaft bearings. If you see Greece leaking from those, you probably have the same issue as in the video.
Ok i have a 2010 jeep grand cherokee and its making this exact noise . i distinctly remember hitting a bump and hearing something kind of 'pop' then it made this exact noise . could this be the only cause of this exact sound ?
I never put a new gease boot on. It's not worth improperly lubing and contamination in the bearing. In my opinion. If you are going to remove the cv shift, just put a new one back. Most come with a lifetime warranty and you don't have to worry about the mess and extra time of rebuilding your cv shift. If the boot rips again, go get a new one for free.
@Scotties Hobbies I guess if you mean solved by replace then sure. And I understand the RUclips game of titles and etc... I am not a mechanic. But I do work on cars as a DIY person. Long story short, I got screwed over by a shop while in school. So... Here's a video of someone tearing it down. ruclips.net/video/QYi_zGcg7ME/видео.html It is not stated why, but my guess, once the housing and inner race got damaged, the bearings can no longer move freely. The ball bearings in this video was not damaged. That could be considered solve as it some what explain the actual cause of the clicking, clunking sound in details. OEM parts are 3 or 4 times more expensive than aftermarket parts. And while true that it is warranty, you hear some stories, of vibration and other problems. So yes you can always get replacements. Read on forums that some people had to swap out their axle 3x from certain aftermarket parts. Some oem website might still sell parts individually of the cv axle assembly. If you go the OEM route to ensure "problem free" installation gonna cost you. Or aftermarket and take a chance. Best case scenario, I also read in certain places they can rebuild your OEM axle. If it's only your out joints that cause the problem and it usually is the first to go. The shaft and inner cv joint are still good, why not recycle. I know maybe, your intended audience may not be someone who really want the "detail" explanation of things.
That is probably a bushing doing bad. Check all your bushings on the control arms, the strut mount, id see if my bearings are good too. If you lift the car off the ground and can move the top of the tire in and out then your bearing is bad. If you can push in and out on the front or back of the tire, your rie rods are bad. Hopefully you find something checking all those. Keep us posted.
@@ScottiesHobbies I did bring it to smog inspection station to check, they tell me is left axle but I don’t think so. Too harrd with me to find it out exactly
@@jakeculp1131 I was bring my car to autoshop to check they said the sound by axle driver side but I dont believe us. Im confuse And also my car is Toyota camry se 2015 not Honda
My car clunks on turning right and left ive changed ball joints track rod ends wishbones suspension top mounts drop links anti roll bar bushes but not changed inner cv joints , will inner cv joints cause clunking around corners i dont have any clunking whilst driving in a straight line only on corners any ideas?
Motor or trans mounts? Sometimes you can check them by watching the engine while switching from reverse to drive.. not too fast.. the engine might move a lot.. if it does, the mounts are probably bad.
@@jamiewilliams1287 it is possible. I actually just had a friend with the same problem as you. It was a mid 20 teens civic. You could hear the clunk a lot in parking lots. One or two clunks when he would turn... if you have a continuous clunk while turning, I doubt the mount is the issue.
@@ScottiesHobbies yea my cars a lupo gti im thinking its either the mounts inside drive shafts or the diff.. what was his problem mine knocks about twice 3 times
I've never seen one break... but... I had a view message me saying he broke and slapped around on the freeway causing major damage. So... I'd give it some attention sooner than later.
@@ScottiesHobbies thanks for the reply. I hit a small kerb when parking. Front left of the tire wall took the impact. I notice a squeaking noise later that day when braking but that went away. Now after 10 mins of driving or so there is now a small rattling noise under acceleration and at cruising speed and stops when i lift and slow down. If I drive slow I hear nothing but if I turn really fast to the right I can hear the rattle again. Sound is definitely coming from the front left where I hit. Could it be brake or cv, or?
Weird how it only happens after a few mins of driving. Thinking the rotor heats up and expands causing rubbing, honestly don't know if that's even a thing lol
So my 2014 Honda Civic has a clacking sound when I turn the steering wheel with the turn signal on it’s not the turn signal sound it’s a clacking sound I did go to a shop I had a bad left cv joint and axle got it replaced steering is more smooth but still get the clacking with turn signal on when turning anyone have the same issue or knows what issue might be maybe I need a new turn signal stock? I’m at around 85k mileage for anyone wondering
What causes these to break? It seems like my 2018 Jeep Compass cv shaft just broke at only 45,000 miles. I do Uber and Lyft. That’s why all the miles in just 1 year. But, still never had this issue on any of my other cars. What gives?
That could be any bushing in the suspension or steering system. Someone needs to watch the location that is clunking. The bad bushing should move. Sometimes they are hart to find. Check the strut mounts too. Good luck and keep us posted.
Hey! I love cichlids! I use to watch my convicts get super colorful, breed, and watch them grow. But anyway.... replacing 1 ever 3 years really is not bad. Especially if the vehicle is paid off.
@@ScottiesHobbies definitely love all my cichlids I'm a breeder of these beautiful Peacock cichlids. Well that's good to know about the CVs unfortunately just had the calipers done because they where sticking also was thinking this was the noise coming from them
Mine makes a noise that's high pitched similar to this but it's in my wheel when I'm in drive or reverse when I turn hard right I'm hearing some kind of clicking in the same area of this video I've replaced alot of stuff so I'm hoping this video helps
Replaced my passenger axel and still have the noise now I cant afford to find the real problem. Also most of my components are new ( shocks/struts, tie rod ends, sway links, lower control arms etc) 04 rsx
Did you see any visible grease leaking from either of the boots on the CV shaft you replaced? Have you visually inspected the other side for boot damage? How about your strut mounts? Lastly... in the last month my friend had a odd sound like a clunk when he make a turn. Only one clunk per turn. We couldn't find anything. Come to find out he had 2 bad motor mounts. Replaced the motor mounts and sound went away. With all that said. Not all repairs needed are going to be the same every time. Sometimes its worth paying a little , like $90, on a diagnostic. Spend more now, save a ton in the long run. I'll cover this on a podcast this weekend. Check back or subscribe for a Hopefully more detailed response if there can be one.
@@ScottiesHobbies all work has been done by mechanics I've thrown so much money at it and the problem persists. Theres no more money now. Also motor mounts were the first thing I had replaced
@@chadwolf790 i would say no in that case. But I was thinking, bearing? But you'd hear like a constant rubbing sound. Sounds like the plastic underbody panels hanging down... but in the car more than the outside.
@@angelisone I think the ball joints are good. It wasn't having a issue untill the cv axel boot ripped now when I turn it clicks alot. When I replace the cv axel it should be good after that but if it still feels wierd or clicks after I replace the axel then I will do those next I'm tight on money rn so I'm going to fix 1 thing at a time lol
@@OGGamingJedi What year, brand, model & mileages? The axle's nut is on very tight. 1. Make sure you straighten the axle's dented lip to round & reuse it. A new axle has nut 2. Loosen that nut with wheel on the ground or re bar to lock rotor from spinning. 3. If you can't take out the axle assy out, then turn the wheel (N) ever 11 degrees 4. If you remove part of the lower or top joint, check with 3 fingers = move means replace 5. Check lower control arm /or top control arm 6. Once the axle is out do check the inner and outer tie rods = hold it horizontal & let up All those mentioned above should not move easily When you buy the cv axle, make sure you buy transmission seal (cv axle to transmission)
Thank you for watching! 🙌 I'm glad my video was helpful for your DIY project. It means a lot that you took the time to learn and complete the task yourself. Don't forget to smash that like button and subscribe for more DIY tips and tutorials! Happy fixing! 🔧💡 #DIYSuccess #LearnAndGrow #LikeAndSubscribe
Having the same sound on my 2016 Sonic 1.8L. Truth is my Sonic had multiple rattles; the right side engine mount was shot, changed all 3 of them. The sway bar links were shot, changed both sides with metal Moog links, oem were plastic😬. All that noise was semimasking this ticking sound.
This video may prove to be the answer, saving me $$ and time.
Thanks Brotha.
🤞🤞🤞 I hope! Keep me posted on what you find. Good luck on your fix. 👍
Thanks for the info! Sounds exactly like my car when I turn.
Yep sounds like my problem on a 2013 Honda Odyssey. CV joint. Had the same issue on old Honda Accord. Never had this issue on any other make of vehicle I’ve owned.
My 2001 Lincoln Navigator periodically makes a "CLUNKING" noise when turning left or right
(mostly right), usually when in 1st gear while pulling out of a parking spot, or when making a right turn onto a street from a Stop Sign.
It can also barely accelerate when it happens, and we've had to have it towed.
It feels like riding over a boulder!
We've spent nearly $4000. on various repairs to try to fix the problem over the last year or so.
The mechanic FINALLY exoerienced the "Clunking" situation for himself today, and said it was the Gear Box.
What do you think?
Sounds exactly like what my passenger side 06 ford explorer is doing. Only video I found that showed an example of the noise I’m looking for, thank you.
Do you have a 4 wd?
Helped quick fast in a hurry. Don't always find vids with VEHICLE IN MOTION diagnosis. 02 Chrysler Sebring(FWD) Appreciate ya for this!
Glad to help. Thanks for the view and comment.
Just curious, but did you have CV axle problems without the boots being torn?
So hurricane helene hit my area in Gastonia and my car was parked but it was moved by the wind and I went to drive it and it’s making the exact sound! Turn right and it makes the cringing sound so now I know what needs to be fixed that you so much my friend! We’re all trying to recover power came back on y
Last night we were 3 days in the pitch black and in some areas like crowders mountain 10mins from me still no power and more areas around me smh it’s been a tough one but thank you for this video much needed #HeleneSurvivor #BlessWNC #Greatful #Thankful
Man.... sorry to hear you guys got hit. We have been hearing it's horrible out there. Good luck to you and yours on a quick recovery. 🙏.
After inspection, CV joint and axle showed no breakdown. With no acceleration or breaking It makes a noise on a slight steer to the right. Sounds like its from the passenger side...2011 Camry LE
why is he glowing like a jedi ghost
Because those CV joints when exposed open they give out a lot of heat radiation. That's why they are supposed to be seal and greased.
Because he's pale.
😂😭😂
Lmaooo
Because he had to use a lot of force to remove this cv
I had bought a 2010 jeep patriot and was told it needed the cv axles replaced. I drove it until my new ones came in and it was making this sound after a month of driving it then it would stop then the other day i was on my way home and i heard a different sound, almost like my tire was flat so i slowed down and started looking for a spot to pull over but as i started to slow down it went away so i started to speed up again and it came back, i made it to the house and jumped out to see what was going on and it wasn't my tires so i believe the axle finally gave, so now it's time to finally put the new ones in amd hopefully fixes the issue.
This is the video with same exact noise my car makes when I making turns , I have 2010 Nissan Altima coupe . I’m definitely gonna check it out
Nicee!! Let me know if if we helped pinpoint your issue.
Which video shows what needed to fixed? Having trouble finding it. Thanks
Thanks, I think this is exactly what is going on on my vehicle. Much appreciated!
How much will be the cost of the joint plus labor...approx?
About three fifty
how much does a cv joint cost to replace?
My 95 corolla had a cv joint that came off like an over done turkey leg, once the wheel and hub came off, my guy pulled on the cv axle and it popped off. He had to pry the other end out and had it jacked up high to get under and i lost spme fluid once it finally came loose (domt worry i replaced) that was a fun day lol
My 2021 Corolla is making the same sound when I turn sharply and fast to the left 😮
Mine... Kind of sounds like that... When i reverse its the worst. The car vibrates a bit too if i go fast... And my key keeps sticking in accessory. Is this connected??
I have a 2021 Honda talon 1000r UTV I'm thinking it could be the driveshaft. But it's not I think it's a CV axle or the differential in the front
Thanks for posting,
I have a 2007 cadillac dts and its making that clicking noise ,
I have a new 2023 Acura Tlx type S after 2 months of ownership when I turned the steering wheel on start up it makes a loud humming noise. But on acceleration the noise disappear. I brought it the dealership and they changed the cable wire the humming noise was fixed but after 3 weeks came hack and its louder. It's in the dealership again right now for fixing 😪. Do you know by chance what's going on with the car? Please reply. Thank you!
How about multiple ticking sound after making a turn and then pressing the accel pedal for a straight drive? This is for Ford Ranger. Thanks
Well, I have a Trd Camry and my axle just literally snapped in half but it’s designed to do that I heard? Also, my ball joints snapped in half and I don’t know how else I could’ve happened other than a Potholes but yeah it’s definitely snapped in half hour video and pictures of it. Lol.
Okay, when you're I have a 2014.Ford Explorer, when you're sitting still are going really slow and you turn the wheel.It's making a clicking sound, but when you driving it at 30 to 40 mile an hour, you do not hear It.What could be the problem
my car has the same sound but both left and right cv boots are not torn. what can be the other cause of this?
Cimmenting for support!
Appreciate your support! 😃💪👍
The sound comes from the back and it sounds harder and less frequent, could it also be the cv joint?
Doubtful.
My brother snapped his lol. He drove his VWPassat quite aggressively through corners. Needed recover lol
Can the car make that noise without the boot being damaged?
It is possible for that to happen. The tall tail sign of a bad CV shaft is a ripped boot with grease leaking out. You could have other issues such as a motor mount being bad, control arm bushing gone bad, or a ball joint going bad too, or even a bearing.
I get this question quite often. Maybe today I will make a quick video on how to do to do a rough check on the bearings and ball joints.
2013 same noise n same problem ty tht save my a lot of money 💰
Awesome intro graphics!!
Thanks. I have a few I try here and there. This is the first time someone pointed out a intro. 👍👍
Good luck on your next project.
My car doesnt clunk but it stutters the turning. If I try to steer sharply on low speeds the car bumbs and after every bumb my steeringwheel gives me some force back
You for sure have some bump steer. What is the year make and model of the vehicle you have?
@@ScottiesHobbies 2004 audi a4 AWR
I am not too much up on the Audi drivetrain. But I can tell you about a time when I drove a Ford Mustang with a locked up rear end. It sounds kind of similar. Every time you would try to make a turn the car would hop around and sounded like you were peeling out every time you turned. The sharper the turn the worse it felt. Now I'm not sure if that's even possible on the Audi but that's kind of what I'm hearing you explain.
@@ScottiesHobbies sounds similar, but it only happens when I make a sharp turn otherwise its okay.
my car 2023 rav4 hybird. today after i do the Uturn and revesre the car . that sounds comes out every time i turn on right …
This is interesting my truck makes a clicking noise while turning right my truck isn't 4 wheel drive so they say it can't be a cv joint they're only in 4 wheel drive. I have a feeling this is what's going on with mine they said there's a tear I'm assuming in that rubber and dirty getting in there
Will this make the car drive like a truck ?
What is the average pricing rage of getting it fix at a tire shop....my need to be replaced nd now I'm fearful to get on the highway for the holidays
I got a 1984 Toyota tercel fwd yes it helped but there’s still something wrong I was woundering if it would be the sway arm bushing or the control arm bushing. Everything on the cars so old feel free to comment if you got any ideas it all needs fixed anyways
Mines been doing this for like 2months now I jus seen last weekend the problem , what is the part name exactly I have a Lexus LS 430 I believe it’s my rear inner tie Rod correct
This would be more directed to the front of the vehicle. Have you checked to see if you have any bushings on the rear end? I remember back in the Day a customer had a Cr-v , when they turned, it clunked. The rear diff had a rubber bushing on the top. just a thought.. and i know its a cr-v..
keep us posted too!! ✌️ 🤞 👍
This definitely sounds like what I'm hearing from my honda oddessey
My noise is almost the same if not the same so I changed the cv axle and it’s still making the noise what do I do
Replace cv joint, the one next to the tire
What was it ?
Damm i change my rack pinion on my car still makes the noice tomorrow i change both cv joint axles hopefully it takes that noice away
15 Dodge Dart is song this but it is when I turn both ways. Is it all one piece or does that mean I have two sides messed up? Sorry if that is a dumb question I’m clueless about cars
Hey I drive a 1997 Ford Explorer XLT and it sort of makes the same noise when I make wide u-turns do you think that could be the same problem with my car and it sounds like it's on the passenger side
I have this problem in Nissan Juke, turning right in slow speed, they do replace my drive axle and alignment it went go away after driving 1000 miles it went back again. With a much louder clunking noise when turning right. Any help what really wrong?
Hi there I have kind of same noise when I turn left but very very tiny. The vehicle was sitting for a while with the previous owner. Do u think lubrication will take it away ?
Please reply. Thanks again for your time
Its worth a try. Have you looked to see if you have a torn grease boot on your cv?
@@ScottiesHobbies no I didn't try to see. But can u uncover the boot to see that ?
It also make tick noise when I take off at gas.
@@ashrafsiddiquee3190 if you look at the back of your rim, you should be able to see your outer cv boot. It'll look like a black accordion. See if those are broken and grease slung out of it. Check both sides.
@@ScottiesHobbies thank you for your time and reply. I'm acctueally replacing both CV axles right now. Waiting for my macanic to finish up and call me to pick up the vehicle. Let's see how it is. Hopefully problem should be solved .
I'll let you know after I drive the vehicle.
Thanks again for the reply
My boot isn't broken but I'm getting a clicking sound turning
What about a slow tocking sound when turning - not as fast paced sound as in this car?
Motor mount, ball joint, or suspension mount. I'd check the bearings and steering real quick.
@@ScottiesHobbies thanks i already purchased some tie rods and stabilizer links so will change those first while i get the ball joint and possibly shock mounts.
My wife's vehicle has more of a 'clunk' than a 'click' sound. But I'm going to check this out when she gets home. Thanks for the vid. BTW, is this something that's difficult to replace? Is there special parts required? Should I take it in to a mechanic or can I handle this one?
Did you ever get this solved? I’m having the same issue. More of a clunk than a click.
@@JayAlstonArt me also, i get like a tock tock slow pace sound when turning, ever figured out?
Thank you Scottie ! great video.
I replaced both mine on my front wheel drive car and I still have that clicking sound on hard turns .. but only during or just after acceleration
Motor mounts? Pop the hood. Have some one hold the brake firmly. Switch gears from drive to reverse. Not to fast and do not hit the accelerate pedal. Watch the engine while shifting. See if the motor moves. It should stay pretty firm. If a mount is bad it should rock. Checking side mounts are a little harder to check but can usually be visually inspected.
Good luck!!
@@ScottiesHobbies Thanks for your answer. I will look at that. A mechanic will examine the problem tomorrow. I'll post the results.
@@ScottiesHobbies so the mechanic looked at the engine as I shifted with the brake on... he said the amount of engine movement was normal. "there has to be some movement." I mentioned that another mechanic said it could be the motor mount and he said maybe but it wouldn't cause the differential to be out of alignment....
He concluded that it was the differential. its a front wheel drive. He said that there is probably some erosion of the gears and at certain angles and speeds the increased amount of space between teeth causes the ratcheting sound.
He said it wasnt the CV assembly.
I looked online and saw quite a few people had problems with the transfer case. Basically it being too close to the exhaust dehydrates the grease in the transfer case and it becomes sludge... and or its not watertight and the gears rust...
Those seemed to be mostly rear differential complaints. In nearly all the write ups it wasnt specified .
But I looked at the transmission fluid and the mechanic did too. He said it was good and that there was no contaminants in it. No metallic pieces I suppose... This was after driving around for a while.
Im hoping that I have a good differential and that maybe I can just have the fluid changed or something ... The mechanic said its a normal problem for my car and replacing the differential would be expensive... I may have it done anyway cuz I like the CX9.
@@mikesuniverse1789 its the wheel bearings most likely.
@@j.gtheautotech8455 it turned out to actually be the water pump fan. Once replaced the sound stopped
Idk why I can send a picture bit you said you never seen a CV axle snap before but my 2000 Acura tl had one of its axles snap into 2 right in the middle. Driving no more then 20 mph amd it skipped like my tires bounced on the road I let go of the gas and slowly pushed it again and it snapped in 2 lol.
that is crazy! Does it have any symptoms before it snapped or did it just catastrophically fail?
@@ScottiesHobbies no just failed for now reason. Thought I share some info about it
What about a wub wub sounds when turning right. It sounds like it's coming from the driver side rear
Probably bearing in the wheel is shot sounds like an airplane while driving I bet
I'm hearing same sound now after 290 000km. It does exactly same sound but after like 10-20km driving it's disappearing. 🤔
Have you taken a look at your CV boots? When you get a chance take a look under the car on the inside of your drive wheels. It's. You should have some rubber accordion looking boots that seal the CV shaft bearings. If you see Greece leaking from those, you probably have the same issue as in the video.
I have a very similar sound - replaced CV axles and bearings, and I still have the same sound under the same turning situation. Any ideas?
Did you ever figure this out?! I can’t find anything and we’ve replaced both as well
04 GTO is doing this, it has the irs, guess it's time for them 700 hp axels.
Thanks for this video 📹 🙌
My pleasure 😊
Ok i have a 2010 jeep grand cherokee and its making this exact noise . i distinctly remember hitting a bump and hearing something kind of 'pop' then it made this exact noise . could this be the only cause of this exact sound ?
No unless your jeep is all wheel drive?
Not solved.
If that is the case a regreased and new boots should work base on your diagnostics.
So what is the actual cause?
Hmmm.... solved this car.
Did you see the 'clunking' video?
What do you think caused the sound?
I never put a new gease boot on. It's not worth improperly lubing and contamination in the bearing. In my opinion. If you are going to remove the cv shift, just put a new one back. Most come with a lifetime warranty and you don't have to worry about the mess and extra time of rebuilding your cv shift. If the boot rips again, go get a new one for free.
@Scotties Hobbies I guess if you mean solved by replace then sure. And I understand the RUclips game of titles and etc...
I am not a mechanic. But I do work on cars as a DIY person.
Long story short, I got screwed over by a shop while in school. So...
Here's a video of someone tearing it down.
ruclips.net/video/QYi_zGcg7ME/видео.html
It is not stated why, but my guess, once the housing and inner race got damaged, the bearings can no longer move freely. The ball bearings in this video was not damaged. That could be considered solve as it some what explain the actual cause of the clicking, clunking sound in details.
OEM parts are 3 or 4 times more expensive than aftermarket parts. And while true that it is warranty, you hear some stories, of vibration and other problems. So yes you can always get replacements. Read on forums that some people had to swap out their axle 3x from certain aftermarket parts.
Some oem website might still sell parts individually of the cv axle assembly.
If you go the OEM route to ensure "problem free" installation gonna cost you. Or aftermarket and take a chance.
Best case scenario, I also read in certain places they can rebuild your OEM axle.
If it's only your out joints that cause the problem and it usually is the first to go.
The shaft and inner cv joint are still good, why not recycle.
I know maybe, your intended audience may not be someone who really want the "detail" explanation of things.
@@ScottiesHobbies and here is a more detail tear down of the outer cv joint.
ruclips.net/video/3-R11jtnyV8/видео.html
My car just knocking 1 time
Turn alway left or right; back up turn hear knock... so is spring or axle pls
That is probably a bushing doing bad. Check all your bushings on the control arms, the strut mount, id see if my bearings are good too. If you lift the car off the ground and can move the top of the tire in and out then your bearing is bad. If you can push in and out on the front or back of the tire, your rie rods are bad. Hopefully you find something checking all those. Keep us posted.
@@ScottiesHobbies
I did bring it to smog inspection station to check, they tell me is left axle but I don’t think so. Too harrd with me to find it out exactly
@@vieboi5483 look into loosening and then retorqing your steering rack. Honda put a tsb on it
@@jakeculp1131
I was bring my car to autoshop to check they said the sound by axle driver side but I dont believe us. Im confuse
And also my car is Toyota camry se 2015 not Honda
Thanks so much my man
Glad to help. Good luck with your next diy repair. 💪🏻👍🏻🤞🏻
what would happend if you don’t fix it
I just had the CV axle and control arms replaced. And it still makes the noise
When does it make the sound?
Brakes maybe?
2001 Honda Accord Coupe.... Thanks 🙏🏽
My car clunks on turning right and left ive changed ball joints track rod ends wishbones suspension top mounts drop links anti roll bar bushes but not changed inner cv joints , will inner cv joints cause clunking around corners i dont have any clunking whilst driving in a straight line only on corners any ideas?
Motor or trans mounts? Sometimes you can check them by watching the engine while switching from reverse to drive.. not too fast.. the engine might move a lot.. if it does, the mounts are probably bad.
Will that make it clunk around corners?
@@jamiewilliams1287 it is possible. I actually just had a friend with the same problem as you. It was a mid 20 teens civic. You could hear the clunk a lot in parking lots. One or two clunks when he would turn... if you have a continuous clunk while turning, I doubt the mount is the issue.
@@ScottiesHobbies yea my cars a lupo gti im thinking its either the mounts inside drive shafts or the diff.. what was his problem mine knocks about twice 3 times
Can that be solve without buying a new one???
Yes.
Sounds exactly like my range right now
What if you never replace it? What would happen
I've never seen one break... but... I had a view message me saying he broke and slapped around on the freeway causing major damage. So... I'd give it some attention sooner than later.
@@ScottiesHobbies thanks for the reply. I hit a small kerb when parking. Front left of the tire wall took the impact. I notice a squeaking noise later that day when braking but that went away. Now after 10 mins of driving or so there is now a small rattling noise under acceleration and at cruising speed and stops when i lift and slow down. If I drive slow I hear nothing but if I turn really fast to the right I can hear the rattle again. Sound is definitely coming from the front left where I hit. Could it be brake or cv, or?
Weird how it only happens after a few mins of driving. Thinking the rotor heats up and expands causing rubbing, honestly don't know if that's even a thing lol
I have the same car same noise I replaced it myself still make the same noise I think it’s something else plz help
Did you check both sides?
Well did you?
So my 2014 Honda Civic has a clacking sound when I turn the steering wheel with the turn signal on it’s not the turn signal sound it’s a clacking sound I did go to a shop I had a bad left cv joint and axle got it replaced steering is more smooth but still get the clacking with turn signal on when turning anyone have the same issue or knows what issue might be maybe I need a new turn signal stock? I’m at around 85k mileage for anyone wondering
What causes these to break? It seems like my 2018 Jeep Compass cv shaft just broke at only 45,000 miles. I do Uber and Lyft. That’s why all the miles in just 1 year. But, still never had this issue on any of my other cars. What gives?
Inclined road parking and bumps
My car clunks hard when I’m parked and turn the wheel to full lock what can it be? I have a 2011 rwd Chrysler 300
That could be any bushing in the suspension or steering system. Someone needs to watch the location that is clunking. The bad bushing should move. Sometimes they are hart to find. Check the strut mounts too.
Good luck and keep us posted.
@@ScottiesHobbies just traded the car in for a Q50 redsport thanks ❤️
I switched my axels still does the same moise
could be a motor or trans mount.....
Thanks, that’s exactly the noise and problem on Honda Odysee.
👍👍 glad to help. Hope I saved you some head ache trying to find the noise. Good luck on your next project 💪🤞
SMH I'm afraid this is the symptom my car is having. I had right one done about 3years ago and now the left is clicking
Hey! I love cichlids! I use to watch my convicts get super colorful, breed, and watch them grow.
But anyway.... replacing 1 ever 3 years really is not bad. Especially if the vehicle is paid off.
@@ScottiesHobbies definitely love all my cichlids I'm a breeder of these beautiful Peacock cichlids. Well that's good to know about the CVs unfortunately just had the calipers done because they where sticking also was thinking this was the noise coming from them
thanks for the help. my car exactly.
Def helped me
Mine makes a noise that's high pitched similar to this but it's in my wheel when I'm in drive or reverse when I turn hard right I'm hearing some kind of clicking in the same area of this video I've replaced alot of stuff so I'm hoping this video helps
Replaced my passenger axel and still have the noise now I cant afford to find the real problem. Also most of my components are new ( shocks/struts, tie rod ends, sway links, lower control arms etc) 04 rsx
Did you see any visible grease leaking from either of the boots on the CV shaft you replaced? Have you visually inspected the other side for boot damage? How about your strut mounts? Lastly... in the last month my friend had a odd sound like a clunk when he make a turn. Only one clunk per turn. We couldn't find anything. Come to find out he had 2 bad motor mounts. Replaced the motor mounts and sound went away.
With all that said. Not all repairs needed are going to be the same every time. Sometimes its worth paying a little , like $90, on a diagnostic. Spend more now, save a ton in the long run.
I'll cover this on a podcast this weekend. Check back or subscribe for a Hopefully more detailed response if there can be one.
@@ScottiesHobbies all work has been done by mechanics I've thrown so much money at it and the problem persists. Theres no more money now. Also motor mounts were the first thing I had replaced
@@chadwolf790 holy cow! I'd be frustrated. Do you get 'road noise' when driving?
@@ScottiesHobbies I wouldnt hear over music/ wind
@@chadwolf790 i would say no in that case. But I was thinking, bearing? But you'd hear like a constant rubbing sound. Sounds like the plastic underbody panels hanging down... but in the car more than the outside.
Thank you !
Can this cause an accident
If it breaks, it can.
2010 Dodge Grand Caravan. Thanks!
Glad to help. Keep us posted on your repair. 🤞💪👍
@@ScottiesHobbies it was the CV Shaft. Thanks again
My car is making the same noise but the boot on the CV joint is good and not torn. Can it still be the cv joint?
jack the two front up in the air.
turn your wheels while turning.
also check your sway bar links by grabbing & turning.
@@angelisone thank you!. I found out it is the CV axel the boot did tear just wasn't where I could see untill I lifted it
@@OGGamingJedi If you have not replaced them, do replaced the lower ball joints also.
and check for inner and outer tie rods.
@@angelisone I think the ball joints are good. It wasn't having a issue untill the cv axel boot ripped now when I turn it clicks alot. When I replace the cv axel it should be good after that but if it still feels wierd or clicks after I replace the axel then I will do those next I'm tight on money rn so I'm going to fix 1 thing at a time lol
@@OGGamingJedi What year, brand, model & mileages?
The axle's nut is on very tight.
1. Make sure you straighten the axle's dented lip to round & reuse it. A new axle has nut
2. Loosen that nut with wheel on the ground or re bar to lock rotor from spinning.
3. If you can't take out the axle assy out, then turn the wheel (N) ever 11 degrees
4. If you remove part of the lower or top joint, check with 3 fingers = move means replace
5. Check lower control arm /or top control arm
6. Once the axle is out do check the inner and outer tie rods = hold it horizontal & let up
All those mentioned above should not move easily
When you buy the cv axle, make sure you buy transmission seal (cv axle to transmission)
Thank u
What can cause a clunking noise when turning the steering wheel to the right when in reverse in a Honda civic 2012
Any update on yours? I’m having the same problem with my 12 civic I’m thinking it’s either this or a tire rod issue.
Probably tie rod too you can check by lifting the tire that has the issue and checking 12 an 6 and and 3 and 9 for play
Any clues to the language?
Probably a French orgin?
Mines doing this even when I’m not turning
Hmm my vehicle isn't front wheel drive but it is 4x4.
🗣🗣🐐😤💪🏾💪🏾🔥🔥🔥💯💯💯💯
👍🏻💪🏻
I have a rocking sound in my front wheel,anyone know what that could be.?
Do you hear the sound while driving or when you jack the car off the ground?
When I start driving
2016 Dodge dart
2005 VW Passat 1.8T
Thank you for watching! 🙌 I'm glad my video was helpful for your DIY project. It means a lot that you took the time to learn and complete the task yourself. Don't forget to smash that like button and subscribe for more DIY tips and tutorials! Happy fixing! 🔧💡 #DIYSuccess #LearnAndGrow #LikeAndSubscribe
Mechanic with gloves not A good mechanic😝
Haters gunna hate 😂