Thanks! It was purchased at Taiwangun, an EU shop. Looks like it's out of stock right now though. If you can you should try to get the version with the windowed PMAG as that version seems to have a normal sized MWS magwell. The version from Taiwangun has a uniquely designed magazine which is a bit thicker than standard MWS mags and therefore the magwell is a bit larger as well to accomodate this. If you use the slightly smaller original MWS mags they can wobble when firing which in turn can lead to the nozzle head breaking when it skips over the bb and slams into the metal hop house. Looks like Evike Europe has the PMAG version with the correctly sized magwell in stock, if you're in Europe.
@@Basterds_Airsoft I am in Europe! I really appreciate this quick response. Im a big fan of you and want the noveske N4 myself mainly because of your content and all the great responses you provide! Keep it up!
@@tobiasfurst-n4d Yes, the inner barrel might be shorter on the US/PMAG version. Makes it shoot just a bit softer. Either way you should install an npas to regulate the fps, like the Feda valve. If you go for the PMAG version you should still check to make sure that there is not any upwards/downwards tilting of the mag when you rock it back and forth. And always make sure mags are well seated. Should save you from any malfunction headache.
Im sorry for so many questions but why does it say on TaiwanGun that the power of this rifle is 0.9 joules as opposite to evike one that has 1.45 joules? Is that info right or is it wrong and the TaiwanGun rifle has more power?
I’m currently using this and it’s completely stock and the Magpul style magazine that came with it, sometimes when I’m using it the gun will have the bolt go forward and all the gas will empty out of the mag through the ejection port of the rifle, anybody help with the cause for this and fix?
When it happens. Is the bolt fully forward and locked in? Or is it out of place? If it’s usually working fine then I would think it’s misfeeding and then venting gas as the nozzle is not in the hop chamber fully sealed. Perhaps you are over gassing the mag and liquid gas comes out causing a weak cycle and freezing of the nozzle? You only want about 1/2 to 2/3 of gas in the mag to allow expansion of the gas and not expel liquid. Hard to pin point exact issue without looking at the replica in person.
It runs pretty much like an MWS. However, I've replaced a bunch of parts now as I had some laying around. But thats upgrade parts that can be put to good use in a TM mws aswell. - hop rubber - hop nub - buffer with shifting weights (reduce bolt bounce). The stock mag is not great. The seal is not that good i've noticed. Guess it can be fixed with a new gas router. But pickup other aftermarket mags or original TM mags for it instead of the DE mags.
Depends if you have the EU version or not. If you have the EU version you need to shim the magwell to make sure there is no excessive play. Otherwise the mag can tilt forwards/backwards when shooting which can cause the nozzle to ride above the feed lips and smash into the hop unit and break.
![Eminem - Temporary (feat. Skylar Grey) [Official Music Video]](http://i.ytimg.com/vi/ZaK9Wi5ho0o/mqdefault.jpg)
![[MWS ep.7] NOVESKE N4 by EMG x DE](/img/1.gif)
Run rabbit run!
good~!
Hello! Nice video as always. Where did you buy your DE MWS?
Thanks!
It was purchased at Taiwangun, an EU shop. Looks like it's out of stock right now though.
If you can you should try to get the version with the windowed PMAG as that version seems to have a normal sized MWS magwell. The version from Taiwangun has a uniquely designed magazine which is a bit thicker than standard MWS mags and therefore the magwell is a bit larger as well to accomodate this. If you use the slightly smaller original MWS mags they can wobble when firing which in turn can lead to the nozzle head breaking when it skips over the bb and slams into the metal hop house.
Looks like Evike Europe has the PMAG version with the correctly sized magwell in stock, if you're in Europe.
@@Basterds_Airsoft I am in Europe! I really appreciate this quick response. Im a big fan of you and want the noveske N4 myself mainly because of your content and all the great responses you provide! Keep it up!
@@Basterds_Airsoft Also do you think that the US version will have any internal differences from the Europe version?
@@tobiasfurst-n4d Yes, the inner barrel might be shorter on the US/PMAG version. Makes it shoot just a bit softer. Either way you should install an npas to regulate the fps, like the Feda valve.
If you go for the PMAG version you should still check to make sure that there is not any upwards/downwards tilting of the mag when you rock it back and forth. And always make sure mags are well seated. Should save you from any malfunction headache.
Im sorry for so many questions but why does it say on TaiwanGun that the power of this rifle is 0.9 joules as opposite to evike one that has 1.45 joules? Is that info right or is it wrong and the TaiwanGun rifle has more power?
I’m currently using this and it’s completely stock and the Magpul style magazine that came with it, sometimes when I’m using it the gun will have the bolt go forward and all the gas will empty out of the mag through the ejection port of the rifle, anybody help with the cause for this and fix?
When it happens. Is the bolt fully forward and locked in? Or is it out of place?
If it’s usually working fine then I would think it’s misfeeding and then venting gas as the nozzle is not in the hop chamber fully sealed.
Perhaps you are over gassing the mag and liquid gas comes out causing a weak cycle and freezing of the nozzle? You only want about 1/2 to 2/3 of gas in the mag to allow expansion of the gas and not expel liquid.
Hard to pin point exact issue without looking at the replica in person.
The battle kilt 😂
How is that thing running? I was thinking of grabbing one myself. As compared to a TM MWS?
It runs pretty much like an MWS. However, I've replaced a bunch of parts now as I had some laying around. But thats upgrade parts that can be put to good use in a TM mws aswell.
- hop rubber
- hop nub
- buffer with shifting weights (reduce bolt bounce).
The stock mag is not great. The seal is not that good i've noticed. Guess it can be fixed with a new gas router. But pickup other aftermarket mags or original TM mags for it instead of the DE mags.
@@Basterds_Airsoft thank you for all the info! I am thinking this may be my next gbb purchase
@@Basterds_Airsoft wich one rubber and nub combo?
PTS MEC rubber and Bavtac magic nub
@@Basterds_Airsoft yeah the only issue I’ve found is finding TM Mags. Which aftermarket mags would you recommend instead of TM m4 mags?
What’s the max range on the rifle ?
Depends on what fps / joule it’s set to. But about 50m
What magazine should i use for this gun? Because i have TM mags for 40 euro. Will they work great or not?
Depends if you have the EU version or not. If you have the EU version you need to shim the magwell to make sure there is no excessive play. Otherwise the mag can tilt forwards/backwards when shooting which can cause the nozzle to ride above the feed lips and smash into the hop unit and break.
Wich gas u use? Green gas or marui gas?
Ultrair powergas. Without silicone
@@Basterds_Airsoft Needed internal improvements to run well on this gas? Does the auto fire work well?
where in the UK has 1 available bud?
No clue mate! Think they are out of stock at most places now. Taiwangun is where I found one.
highpressure airsoft in the UK has them in black and FDE