94 Craftsman II GT6000 Garden Tractor
HTML-код
- Опубликовано: 28 фев 2017
- I went out looking for a used garden tractor that I could use to replace my YT3000 as my main mower, and ended up with a old school GT6000 with the Hi/Lo trans and a sleeve hitch for $40.00 !
Хобби
Just sold one just like that for $700. They are way better than any lawn or yard tractor sold today.
If its that great why get rid of it? I ask cause i found on for sale for 250 ot needs some work but im trying to ses how good they are if its worth it
@@ryancollins3227 I’m a small engine mechanic and I sell repaired and refurbished lawn equipment.
I can only have so many tractors. I love to fix them up so I eventually have to part ways with them so I can get more!
You got a great deal. I bought the same one, a 1993 model a few months ago and have since added a new sleeve hitch from Johnny Products.
You're a very wise man, sir. I applaud your negotiating skills. Much respect to you and your vids .
Thanks!
Just bought mine. Didn’t run owner said it runs with gas in the carb. So for fun I put gas in the tank. And a new air filter, fired right up. Going to clean it up and use it for off-roading.
That would be great for that- A little maintenance and I am sure it will work perfect
I've got a 91 GT 6000 with the 18 horsepower Briggs & Stratton opposed twin that I use around the land at it's a beast
Had this same tractor, bought it new with dozer blade and mower deck. Cut grass and plowed snow for 15 yrs. Replaced starter,Mower deck mandrel,rear tires. Gave it to a friend, he still uses it to clear snow from his business parking lot. Worth every penny.
cool, while back i picked up a couple gts, one a 86gt 2 with 18hp opposed twin horizontal, the other a 90's? gt6000 with 20 hp onan. well 86 was in by far worse shape, but 90s had a bad coil. so my gt6000 became a parts tractor for the gt 2, used the practically new deck, went thru and cleaned/ painted it, motor was full of water, but with cleaning it did run.
its a beast, i pull my trailer out of the back yard, it digs right in. sometime id like a sleeve hitch and front plow on it.👍
I like these stories. Why does old always seem better? Of course this is not the case but there is something rewarding about getting and older workhorse tractor for cheap and fixing it up. As has been said before, the new ones don't compare in quality unless to go into the 5-8k range maybe. I saw the Troy Bilt Pony they sell at Tractor supply and HD for $2200 and it looks like a toy kids tractor, something you would buy little Johnny to learn on. Back in 2008 I bought a 1988 Wheel Horse 518-H, Onan engine and it mowed great and was built like a tank. They do eventually have problems and die but that is after 30 years or so of hard labor. I currently have a Craftsman GT5000 (Husqvarna) that I love but it is about 20 years old and needs a new engine. So now I am on the hunt for another GT........
Because for the last few generations that the old timers have been saying "everything is turning to shit" it turns out that it's not because they have become cynical with old age. It's because they saw how things were, and things actually are turning to shit.
u got a great tractor great deal. U'll like it
Great machines. I miss mine a lot. Mine was an 88 model closeout in early 89...served me very well for 21 years before the engine failed. I'd love to find another one, only difference was mine had the 18HP Briggs & Stratton 2 cylinder engine and the 44 inch mower deck. That 2 speed transaxle was great for all sorts of work, with weights and chains it would do great for plowing too and attachments.
It's a really underrated work horse. I've pulled some pretty heavy loads with mine, and in 1 low its a beast!
Yes they were, they were a pretty dang good machine, and if they would have had an option for a locking differential and some agriculture tires they'd make a great tractor for small gardening projects for sure. I really want to find another one and set it up to use for gardening. The stuff they build now is too cheaply made to hold up to any actual pulling. Not sure how the larger John Deere Garden Tractors like the X500 series and X700 series would be maybe ok, but not the box store stuff.
Love this tractor. I have a 98 craftsman GT 20.5 HP Kohler with hydro trans. Amazing workhorse. You shouldn't have many issues with this beast
Ya those hydros are junk compared to the manual 6 speed with hi/lo.
The back lift is very cool. I wish my 6000 had that feature. Mine is an 18 horse Kohler
Keep an eye on Craigslist. Sometimes a great deal will come along and you can get a parts tractor with that sleeve hitch for next to nothing.
Hey Don't forget more CB radio stuff Vic from Hawaii LOL
Just got one for $260. Needs them front headlights but the rest is great. Its a beast!
Could you make a video on some more info on the sleeve hitch. I have an older tractor as well I want to make one for. Love the videos man👍🏻
Good score man I've got an 18 horse and those things are bulletproof
Still loving it! I've got two summers on the farm with it and its needed nothing since I fixed it up.
worked out good in the end. it looks. 👍
WallysWheels Remade k
Got the same one only mine had a 44inch deck and a 18hp briggs opposed twin decks in great shape but i only use it to plow snow and pull bushes and my old truck around untill we finish the rebuild of its motor
Heads up, that doesn't have a peerless trans. That has a Roper 633a, 3 speed, high low, with square cut gears and needle bearings. Oil filled, and has 3 sets of planetary gears for the differential. Also has 1in axles with splined ends. The hubs are 5X4.5, same as Ford Rangers. I've got a 1992 GT 6000 that has the all metal hood and grill(it's my profile pic). It originally came with a horizontal Onan 20hp but I've converted it to a 18hp Briggs opposed twin pressure lubed vertical (PO got the tractor for the engine for his Craftsman FF).
Thanks for the heads up, and even more so about the info on the hubs. I've been thinking about a set of dual wheels for the rear of this one and that info is perfect timing!
@@FarpointFarms Please do a video of how you did that if you ever do it.
The 6speed Hi/Lo transmissions were Roper-designed and made by AYP right up to 2005 model year.
I bought one for 475 and its manuel its got a brand new mower no rust no scratches at it starts right up bought it with my 15th bday money and now i cut 2 of my neighbor's grass for like 40 bucks in total a week
Great deal. I'll be that tractor pays for it's self in no time!
My old mans tractor is the exact same one.. Still runs, very dependable. You can still find replacement decks. Note, it is a belt driven tractor, do you will go through belts if you do heavy work.
Well done!
I have that exact model, Mine won't allow me to shift into any gear whether the engine is on or not. Can you suggest a cause or remedy with that sparse info? Thanks
Hi I want to put a sleeve hitch connect to my deck lever.Any sources on how to do that thanks.
I am so jealous. God I want a sleeve hitch for my gt6000. 2006 model.
I have a 96 with a 23hp Kohler and a plow. I use it for everything minus mowing and it will not die. It's even moved my truck when it broke down.
That is awesome!
I got one while working on a job for a gentleman who bought a new tractor and said take it if you want it.. free.. needed a battery and front tires.. I took it and I'm building and high speed sled racing tractor out of it as we speak
I have a 2021 Craftsman T240 Kohler 7000 series 22 horsepower 725cc V Twin engine.. love it!!
Not even in the same class, but glad people are still buying American made machines! My shaft drive cub is a prime example of American quality.
I just picked up a GT 6000 ll with the 20hp Onon Engine. Tractor is in beautiful conditions with a low 247 hours. 2 issues. Engine cuts out if I engage the electric clutch for the mower (seller says he thinks the mower spindles may be frozen) second issue is the battery discharge light is on. (seller says it may be an alternator or something). If anyone has any experience with either issue I would much appreciate hearing from you. Thank you.
Great... Enjoyed it... I Subscribed
I’m looking to getting one of these beauty’s soon. I planning to use it to rip the earth up with a box blade
Sounds like a great plan
I got my GT6000 brought into my shop for free hehe. Didn't even need a carb clean, brand new carb. A set of piston rings later and shes plowing my snow. Mine has the 18hp Kohler but no worries, a few months ago someone brought in an MTD branded mower with a 20hp Kohler and newish deck. Ok, I'm done bragging. And 4 quarts oil? Thats crazy, whered you see that?
I have one of theses with a frozen hydro transaxle.
for 40$ i think you made out well. maby you could use it for the back blade or something
any chance you'd know the model or part number of the sleeve hitch?
Trying to find oem fit sleeve hitch for my 1990 craftsman gt.
Craftsman 71-24586
My gt6000 is 26 years old and works perfect, original deck, the manual transmission is indistuctable.
These are really great tractors. I've been toying with the idea of picking up every one that comes up for sale in the area to refurbish and resell. Maybe even offer 90 day warrentys on them. They are so much better built than modern units.
How did you empty the gas tank Eric? Just picked mine up, same color even.
I used a tool called a mightyvac. I have a video review of it on my channel somewhere.
Hi - great video. Just came across your description and I'm looking at the exact same one now. Looks in better shape though, LOL! I was wondering which peerless model the mower has - you mentioned peerless but do you know the exact model? Thanks again!
Hmm. I don't know. I'll have to dig around and see what it came with. Its the 6 speed Hi/Lo trans that is a bit of a legend in the industry. You can't kill them and they will pull a house off of it's foundation in LO/1.
Thanks, unfortunately it sold before I could get to see it. However, you're right about the legendary status of these machines! Appreciate the response.
It's not a peerless trans, it's a Roper 633a.
Viel Spaß beim basteln!
In Deutschland gibt es wenig Zubehör für solche kleinen Traktoren. Deshalb musste ich mir einige Sachen zum pflügen alleine bauen.
Habe einen Seco 4x4, er hat schon RC eingebaut. Es gibt aber noch ein Kit für GPS - das überlege ich mir aber noch.
Grüße aus einer kleinen Stadt bei Berlin / germany
Ich freue mich zu hören, dass Sie in der Lage sind, die Dinge herzustellen, die Sie brauchen. Danke für das Teilen
I just found one of these for $60 that runs and drives lol. It doesn’t have a deck but I’d like to build a race mower with it haha.
What a great deal- have fun with it
How do you change the transmission fluid on this lawn tractor
I don't have this mower anymore, so I can't look to verify how to do it
I found a 95 with a 13.5 briggs ic gold for free , needs work . Is that a good one to fix up. I am going to fix it anyway. I kind of like the tractor.
I say go for it!
Does the 6000 mean that it weighs 600 pounds or is it something else
i have that same mower, it does not take 4 quarts. it takes 2.
I got a free one. With wheel weights deck and plow. Havent got it running yet
That is a great deal for a great mower!
How do you charge the transmission fluid
I don't have this mower anymore, so I can't look to verify how to do it
Can you collect the grass clippings?
There is an add on to do that, but I don't have one.
any model number for the sleeve hitch assembly?
CMXGZBF7124586. Search “craftsman sleeve hitch” on amazon
how do we drive this thing
i cant figure out where the gas is
Hand throttle on the dash
Anyone know the belt size on these? Super hard to find
83 or 85 by 1/2 I have a 85 inch on mine and it's a bit to big. Hope that helps.
I need a starter where can I get on and what's the part number?
The shop manual for this is available online. Look it up and there will be part numbers for all of it.
How much do you want for it any price
I have one of these. It's been abused so much and she still starts better than my father John deere xD
I have a crastman Ii , diehard.18 horse power ..old model riding lawn mower..that doesn't have any information on the serial number..I hopping someone can help on the part number on the transmission belt for it ..or a serial number for the buy .. thank you and God bless you... Ezequiel
The transmission is worth 100$ and the 5 lug 12 inch rims are worth 50$ and up
Would you sell it
Need belt configuration for22.5 hp craftsmen garden tractor
Just got one of those for free at the curb. 4 flat tires and the battery's dead.
I need the deck.lol
Could you please make a video on how to replace the steering bushing or if you did already reply with the link
Hello, did you ever find a video on how to do it or what the part number is?
I have a 94 (Manufactured in 93) Wizard mower, Same platform as your craftsman. VERY RARE. I can only find 14 horsepower models when mine's a dual cylinder 18 horsepower. Biggest difference is gas tank is bigger and underseat instead of behind engine. My mower is VERY RARE and I opnly payed $50 for it. It had common issues like craftsmans. Bad starter.
I have the 1994 Sears Craftsman Diebard II LT4000. 42 Deck, 18HP Briggs, Gas tank sits under the seat. Sat in our family barn since I was a kid. I recently resurrected it, cleaned the carb, changed the oil, new tires, greased and changed the oil. What I found fascinating is for the size of the engine it does not require an oil filter…I love the “Made in the USA” sticker on the metal hood. Runs strong and that engine sounds like lion lol the neighbors love it.
Buenos días,necesito publicación en español,ya q no se ingles,gracias.
(2:15-2:25) Too funny, What will you give me for it. lol
Paid 75 bucks for it and paid 150 for another older one that had the plow but the motor went out on it ao its sitting outback for parts
Are You Sure He Said "Get It Off My Property" And Not "Get off My Property"? You Practically Stole The Thing!
Trade you a 50 inch deck from a 1999 GT5000 for that sleeve hitch.
Randy Robertson I have one where u located
@ Anthony central Kentucky
Local junker sold me one , I did not want it, i offered him 40 but he wanted 50 , he said that the owner said it turns over thats it, your right about the rear end , i didnt know it had that one in it, the more i looked at it, its been stored in side, almost rust free, deck is solid, my has a briggs 18 hp got it running, oh the key works, well worth the 40. And the seat is in perfect shape....
Put tractor tires on the back of that mower it will look a lot better if you want to fill the tires up put calcium or put calcium in and you can go anywhere and tell him what with green for your front tire with green slime and you can go anywhere anyplace anywhere with calcium and green slime and red tired but you can take it anywhere I have one just like it I love it and I won't get rid of it you're looking for another mower come to Felicity you'll find them all there
These mowers are tanks....hi low range transmission...
They really are!
you got a deal bro
If you want to get rid of it just let me know I'll take it off your hands I had one dislike it they're really good tractor you'll like it if you if you don't need it and just bring it on Bring it on back on and bring it on over here to Ohio
Belt control
Nice I got mine for free
My favorite price!
Sell me that bro
mine is a 917 251 511
1996 craftsman with a 20.5 twin kohler. snow beast.. old school but it works..
I'll give you $100 for it if you bring it to me
You stole it.
You stole it. I just paid $300 negotiated down from $400 for one just like it except not in running order. It's being added to an 18hp that I bought new in '94 and still use. I've since got it running and on it's way to being not restored but made nice. The tractors were/are tough but the mower decks were under-built. I've long ago stopped mowing with the 18hp and won't mow with the 20hp either. I'm looking for a hydrostatic model to buy next then it's on to an old Wheel Horse.
There are still good deals out there, some of them are just a bit farther drive!
I'll give you fifty bucks for it if you want to sell it come on over here to Ohio and I'll buy at Tractor off you in a heartbeat
You thief 😂
It was almost a steal!
Cheap Skate.
I am so jealous. God I want a sleeve hitch for my gt6000. 2006 model.
Check Sears if you can find one left. I got 3 of them at a store that was closing for like $40 a piece.