Can not say how much grateful I am, for learning all these golden tips. It is obvious that this is the result of too much experience, time and effort. Thank you very much for sharing 🙏
Thanks, Yea, too much time but it is starting to get a little difficult to continue. Not really any money in it but I enjoy trying to help others. But maybe need to focus on selling my product instead of making videos. I hope the content is helping. Appreciate your comment and all your support.
Thanks so much, I always wanted a great tutorial to teach this, all I ever found were speed builds and it is pretty much impossible to follow along with those 😅, thanks again brother !
Yea, I have watched a lot of speed tutorials and really find them difficult to follow along as well. I refuse to make them myself. I think it is much better to go through and show step by step how to make things. Really appreciate your comment and your time. Thanks for your support. Sorry for the late reply.
This one was a fun one to make. I know I can ask you questions, and you will give me a straight answer. I just started a new series on going through all the ribbons and commands explaining about how to use them and their command line options. Is this something that you think people will find useful or do you think they would rather see making different designs. Not sure I'm venturing on a good path.
@@donsjewelrymakingandjapantrave Your thinking is very logical. Before designing, wee need to know the basic commands. Because it's hard to do in design without knowing how to use commands. Otherwise, it will be memorization and different things will not occur.
Thanks. I have to ask you since you have been watching the channel for a while now. I just started a new series on going through all the ribbons and commands along with the command line options. Do you think this type of content will be helpful or do you think most would rather see different designs being made. I still plan to upload designs but was going to do the commands as well. Not sure it is the right path or not. Your thoughts would be greatly appreciated.
@@donsjewelrymakingandjapantrave (Thanks. I have to ask you since you have been watching the channel for a while now.)i always will be watch your channel.(I just started a new series on going through all the ribbons and commands along with the command line options. Do you think this type of content will be helpful or do you think most would rather see different designs being made.)God bless you sir i really want you to do this. if i well known with all commands designing will easy for me.(Not sure it is the right path or not. Your thoughts would be greatly appreciated.)if you do this i will be Thankful to you and my good wishes always with you.
Hi ,can you direct me to the setting that adds the rhino buttons to the interface. I’ve seen you do it but now can’t find that setting or video. Thanks Brian
Type options into the command line hit enter. This will give you the Rhino options pop up. At the bottom you’ll see toolbars I think second from the bottom. Click on that. Then it will give you a list of all the Rhino toolbars you can load. Scroll down until you see the one that says 16 or 13 that will give you all of them. Just click the box and click ok and you’ll have all the tabs for the Rhino options.
Can you make a video on how to render well and what we should consider to get a good result? How to set the right color for a diamond to be ideal? Because the white diamond in MatrixGold has an unnatural color. Thank You 👍💎
Yea, The Cycles Rendering has a little more learning curve to it. But If you have the 3.0 or later update you should have the Vray diamonds and metals. They will help you out in the rendering area. I will try to get some more content up on rendering soon. Thanks for the suggestions.
I just put up some content on how to change the thickness of the curves in Matrix 9, MatrixGold 3.0-3.5 and MatrixGold 3.8. I hope it answers your question and helps.
I just pulled it off the net. I just typed in drawings and started looking through to find one that might be interesting. There are 100s that you can do the same thing with online. Can't remember exactly where this one is, or I would tell you. Sorry about that. I do appreciate you leaving a comment and your support.
@@donsjewelrymakingandjapantrave okay, i got you and I just wanted to say thank you for your amazing videos. I started learning MatrixGold a month ago, and your tutorials have been incredibly helpful.
Can not say how much grateful I am, for learning all these golden tips. It is obvious that this is the result of too much experience, time and effort. Thank you very much for sharing 🙏
Thanks, Yea, too much time but it is starting to get a little difficult to continue. Not really any money in it but I enjoy trying to help others. But maybe need to focus on selling my product instead of making videos. I hope the content is helping. Appreciate your comment and all your support.
@donsjewelrymakingandjapantrave sorry to hear that, but wish you all the best
Thank you
Thanks so much, I always wanted a great tutorial to teach this, all I ever found were speed builds and it is pretty much impossible to follow along with those 😅, thanks again brother !
Yea, I have watched a lot of speed tutorials and really find them difficult to follow along as well. I refuse to make them myself. I think it is much better to go through and show step by step how to make things. Really appreciate your comment and your time. Thanks for your support. Sorry for the late reply.
Nice educational work Don. Thanks
This one was a fun one to make. I know I can ask you questions, and you will give me a straight answer. I just started a new series on going through all the ribbons and commands explaining about how to use them and their command line options. Is this something that you think people will find useful or do you think they would rather see making different designs. Not sure I'm venturing on a good path.
@@donsjewelrymakingandjapantrave Your thinking is very logical. Before designing, wee need to know the basic commands. Because it's hard to do in design without knowing how to use commands. Otherwise, it will be memorization and different things will not occur.
Thank you so much Don. I am learning so much and appreciate you 😊
Wonderful! That goes both ways. lol thanks again for the comment and the support.
Thanks for the tutorial . Excellent pendant design.
It was a fun one to make. I can see all kind of possibilities with this type of design. Thanks for your support and your comment.
Another video to enrich my library. thanks
LOL Hope to grow that in the future. lol Thanks for the comment and all your support.
excellent video sir.❤🙏🙏
Thanks. I have to ask you since you have been watching the channel for a while now. I just started a new series on going through all the ribbons and commands along with the command line options. Do you think this type of content will be helpful or do you think most would rather see different designs being made. I still plan to upload designs but was going to do the commands as well. Not sure it is the right path or not. Your thoughts would be greatly appreciated.
@@donsjewelrymakingandjapantrave (Thanks. I have to ask you since you have been watching the channel for a while now.)i always will be watch your channel.(I just started a new series on going through all the ribbons and commands along with the command line options. Do you think this type of content will be helpful or do you think most would rather see different designs being made.)God bless you sir i really want you to do this. if i well known with all commands designing will easy for me.(Not sure it is the right path or not. Your thoughts would be greatly appreciated.)if you do this i will be Thankful to you and my good wishes always with you.
thank you
No thank you for everything.
so cool 👍👍
Thank you!
can you please make a video on how to make different types of bangles and ear rings
Very good idea. Yes, I will lean more to those in the future designs. Thanks for the suggestion and your support as well as your comment.
Hi ,can you direct me to the setting that adds the rhino buttons to the interface. I’ve seen you do it but now can’t find that setting or video. Thanks Brian
Type options into the command line hit enter. This will give you the Rhino options pop up. At the bottom you’ll see toolbars I think second from the bottom. Click on that. Then it will give you a list of all the Rhino toolbars you can load. Scroll down until you see the one that says 16 or 13 that will give you all of them. Just click the box and click ok and you’ll have all the tabs for the Rhino options.
Can you make a video on how to render well and what we should consider to get a good result? How to set the right color for a diamond to be ideal? Because the white diamond in MatrixGold has an unnatural color. Thank You 👍💎
Yea, The Cycles Rendering has a little more learning curve to it. But If you have the 3.0 or later update you should have the Vray diamonds and metals. They will help you out in the rendering area. I will try to get some more content up on rendering soon. Thanks for the suggestions.
@@donsjewelrymakingandjapantravecant wait
Hello, may I ask how to make a line thicker like yours? 1:00
I just put up some content on how to change the thickness of the curves in Matrix 9, MatrixGold 3.0-3.5 and MatrixGold 3.8. I hope it answers your question and helps.
where can i download that picture ?
I just pulled it off the net. I just typed in drawings and started looking through to find one that might be interesting. There are 100s that you can do the same thing with online. Can't remember exactly where this one is, or I would tell you. Sorry about that. I do appreciate you leaving a comment and your support.
@@donsjewelrymakingandjapantrave okay, i got you and I just wanted to say thank you for your amazing videos. I started learning MatrixGold a month ago, and your tutorials have been incredibly helpful.
Thats awesome. Thank you for the comment and the support as always. Greatly appreciated.