- Видео 344
- Просмотров 391 101
Don’s jewelry making and Japan Travels
США
Добавлен 22 окт 2011
This channel is about the making of jewelry and travels around Japan. I’ve been a designer and jewelry craftsman for over 35 years. Worked for all the major retailers in the US and traveled just about everywhere in the US making jewelry. Also traveled in Japan found demonstration on making jewelry as well for many years. This channel gives a small look at both those. Hope you enjoy watching and hopefully will get a little something from them as well.
Will also be sharing my experiences in Jewelry CAD designing and making the transition from Matrix 9 to Matrix Gold. I will be uploading Gemvision Matrix 9 and MatrixGold how to videos in order for you to have a better understanding of the program and design techniques. I attended several in house class lessons and hope to pass the knowledge on to you. Matrix 9 is an awesome designing software and MatrixGold just adds another dimension for you to explore.
Safe travels and good designing!
Hit like and subscribe and leave a comment!!
Will also be sharing my experiences in Jewelry CAD designing and making the transition from Matrix 9 to Matrix Gold. I will be uploading Gemvision Matrix 9 and MatrixGold how to videos in order for you to have a better understanding of the program and design techniques. I attended several in house class lessons and hope to pass the knowledge on to you. Matrix 9 is an awesome designing software and MatrixGold just adds another dimension for you to explore.
Safe travels and good designing!
Hit like and subscribe and leave a comment!!
MatrixGold Parametric Name Ring
In this video we will make a fully parametric name ring using MatrixGold Advanced Signet Ring builder. We will also save the profile to our Profiles library to reuse at any time. We will show how to layout the curves and troubleshoot the curves to make sure we get the desired effect of the name. I hope the content helps and if so, please support the channel by subscribing, hitting like and leaving a comment. Thank you for all your support.
Discount code for 20% off of any purchase on Cubebrush 3D sharing website: cubebrush.co/
If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports ...
Discount code for 20% off of any purchase on Cubebrush 3D sharing website: cubebrush.co/
If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports ...
Просмотров: 329
Видео
MatrixGold The power of the Profile Sweep
Просмотров 390День назад
In this video we will design a ring showcasing the MatrixGold Profile Sweep command. It is a very useful tool. We will also use the MatrixGold Gem Guides command and the MatrixGold Parametric Blend Curves command to finish it out. At the end of the content, we will place a gem with a Bezel on the sides of the item. Please like and subscribe if the content is helpful. Thank you for watching. Dis...
What is MatrixGold
Просмотров 190День назад
A Short peek at what MatrixGold is all about. Hope you enjoy! Discount code for 20% off of any purchase on Cubebrush 3D sharing website: cubebrush.co/ If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports and then maybe level up to a faster and higher priced printer. Keep your cost low...
MatrixGold Star Engraving On a Ring
Просмотров 395День назад
In this video we will look at creating a Star Engraving around our center stone on a ring. We will be using Parametric loft and also showing MatrixGold Scallop Cutters. But we will look at creating a master set to be able to use on future projects as well. We will also dive into using the cutters with Gems on Surface and show how it will update with each gem placed on the surface to give us unl...
MatrixGold Making an Organic looking leaf
Просмотров 58714 дней назад
In this video we will look at making an organic style leaf inside MatrixGold. We will be using the MatrixGold point editing and laying out curves to have more control over isocurves and setting the number of points for editing. We will then use MatrixGold Auto Base and Flow on surface to show how we can utilize the leaves in the design process. Discount code for 20% off of any purchase on Cubeb...
MatrixGold Beginner Content
Просмотров 38321 день назад
"Hey everyone! Welcome back to Don's Jewelry Making. Today, we're diving into the crucial details of obtaining the correct thicknesses and measurements for prongs and rail thicknesses. These are vital for ensuring a successful 3D print, casting, and finishing process to maintain top-notch quality in your jewelry pieces. Let's get started!" Understanding Prong Thickness] "First up, let's talk ab...
MatrixGold Men's Beveled Edge Ring
Просмотров 8182 месяца назад
In this video we are going to look at making a Men's Beveled Edge Ring with Parametric history inside Matrixgold. We will be making the profiles and saving them to out library. We will also be using MatrixGold Align command to make our curves smooth for the surfaces. I hope you like the content and hope that will be helpful in your design process. Thank you for all your support and good designi...
MatrixGold Making an Antique ring watertight Part 3
Просмотров 2142 месяца назад
This will be Part 3 of Making an Antique ring in MatrixGold. We will be doing the MatrixGold Boolean Union process in order to get a watertight object good for printing. There will be some things that might help you in the process when things don't go as planned. Basically, just making small adjustments in order to get the Boolean Union to work properly. I hope the content helps. Thanks for all...
MatrixGold Making an Antique Ring Part 2
Просмотров 3462 месяца назад
This is Part 2 of making an antique looking ring. We will be using MatrixGold Object on Curve for the bead work, MatrixGold Gems on Surface command for laying out the stones and MatrixGold Prongs on Surface for laying out some of the prong work. In Part 3 we will be doing the Boolean union of the objects. I think you will find it helpful for some of the items and maybe have a better understandi...
MatrixGold Antique Ring Part 1
Просмотров 3932 месяца назад
This will be Part 1 of a 3-part series on how to make an Antique looking ring. We will go through all the process and even do the Boolean union commands to make it one solid item to finish it off because there are some things you should be aware of. We will be using MatrixGold Parametric Loft command and MatrixGold Curve from 2 views to accomplish the final results. If you are just starting out...
MatrixGold Trim and Split Commands
Просмотров 3922 месяца назад
This will be an introduction to MatrixGold Trim and Split commands. Some of the most important and basic skills that you will need to understand in order to Master MatrixGold and designing with the software. If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports and then maybe level up ...
MatrixGold Point editing
Просмотров 9492 месяца назад
In this MatrixGold tutorial we will go over how to use point editing, MatrixGold Parametric Loft, Select U, Select V and MatrixGold Move UVN commands to make a design that you can save or use in your libraries. You will also be able to make and use the item as an open design or as an engraving on a surface of an item. I hope the content helps. If you are just starting out in 3D printing, I woul...
Happy Halloween
Просмотров 1092 месяца назад
If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports and then maybe level up to a faster and higher priced printer. Keep your cost low to start until you become familiar with everything that 3D printing has to offer. Anycubic Printers and resins: shareasale.com/r.cfm?b=1384498&u=42942...
MatrixGold Loft Parametric and Point editing
Просмотров 6423 месяца назад
In this video we will look at MatrixGold Parametric Loft, Curve from two views. Pave Builder and other commands. We will explore the options that you have in MatrixGold Parametric Loft to create different surfaces and also why you choose multiple rails and the order you choose them in. The effects of why you choose the order and what to think about before you pick the order. We will also look a...
MatrixGold Curve from two views tutorial
Просмотров 6604 месяца назад
MatrixGold Curve from two views tutorial
Rendering Basics Matrix 9 vs MatrixGold
Просмотров 7204 месяца назад
Rendering Basics Matrix 9 vs MatrixGold
MatrixGold Halo ring two sets of stones
Просмотров 5425 месяцев назад
MatrixGold Halo ring two sets of stones
MatrixGold Getting a solid from a single surface
Просмотров 6325 месяцев назад
MatrixGold Getting a solid from a single surface
MatrixGold Convert to Single Span surface
Просмотров 1,2 тыс.7 месяцев назад
MatrixGold Convert to Single Span surface
MatrixGold Smart Flow Surface modeling or Mesh
Просмотров 8357 месяцев назад
MatrixGold Smart Flow Surface modeling or Mesh
MatrixGold Profile to Nurbs Sweep Revised
Просмотров 3897 месяцев назад
MatrixGold Profile to Nurbs Sweep Revised
You are the best, I learn with your videos every morning drinking my coffee!
cool
Thanks for your video , I lost my command line . How can I retrieve it?
Blue
Blue 💙
Excellent✨✨✨
funny intro. thanks for video brother
Thanks
Thanks a lot Don. I'll try it with my own name.🙂
When opening a new file in matrix gold The grid size changes and some colors added in layers disappear
You can click on any of the cog wheels and go to preferences and click on troubleshooting and just reset User Interface. That should take you back to all the defaults.
WhatsApp contact number
Amazing! thank you.
Muchas gracias, excelente tutorial. Thanks....💪👍👍
Thank you sir.
Nice video Thank you.👍
Thank you sir.its very helpful..for learning 3d design cad
Excellent tutorial I like 👊
Thanks Don.
Thanks 👍❤
Don, this is a different kind of work.
lol Yea, I just ran across a new software AI program and wanted to play around with it. Sorry!
Thanks a lot Don.
I made this video complete. But there is a problem. If you smartflow the design, then make intersection its ok. You get a closed polysurface. Then mirror that also ok. You get two pieces of closed polysurface. Then boolean them the result is open polysurface. I analysed it. In the middle of the two pieces where you booelean them is by one side an opening. How do we have to solve this?
Can you give me the time in the video where you are talking about? I'll check it out.
Nice work. I’ve done similar but I’d sweep1 I always forget about loft
hey don can i get a job ,love to work for you,please
love from india
love you don ,u helped a lot. just wanted to ask you' can i get a job ! i am happy to work with humble person like you.
Thank u don
Thank you for being a great and humble.
most waited comeback! EVER
Thanks great work
Love it - happy holidays dear
Thanks a lot Don all your efforts.
true - he is the best
thanks for sharing video. That’s very useful ❤❤🙏🙏🙏🙏🙏
Thank you very much, thanks to your videos I have been able to learn a lot, I hope you make many more. Greetings from Cuba
/Thanks
Thank you so much for this! 😊
No problem 😊Hope it helps. Thanks for your support and comment.
BLESS you!! Thank you soooo sooo much!
Thanks Don for the long Video. Amazing as always
What's the easiest way to find your job bogs?
They should be on the side bar. If not, you can click on the M at the top left, it will give you two drop down menus. click on view and it will give you a list of all the side bar items you can have displayed. Find the one that says projects and make sure it has a checkmark. It then will be displayed in the side bar. It will have your job bags and full saves as well as a folder icon that you can click to see a list of all your saved items and projects. You can also access your collections from that folder icon.
It's been a long time and we miss you. Thanks a lot Don.
Good instruction. I was thinking of other ways to do the Channel cutter (the parametric command exists by the way) but it's good to know why and how to use this function. Good tutorial again Donald thank you
I learned a lot off from your videos.thnx a lot…
Appreciate your support and glad they have been helpful.
Thanks a lot
Really appreciate you taking the time to watch!
he is the best
Thanks !
Appreciate you taking the time to watch!
I know its been ages but part 2 would be fantastic if ever you find the time! Thanks for this.
Is there anywhere to purchase or download the profile library you have? Its so extensive! Or is it just something that you have built up over time?
It's really just something that was collect as I went along. Many were transferred from Matrix 9 as well. I will see if I can make a file and upload them to the Facebook group. I don't think I can just upload the ones from the program because that might be copy write so I'll see about making a new separate file to upload.
@@donsjewelrymakingandjapantrave That would be awesome, I would definitely be happy to pay for the file :)
Thank you for this, this is such a helpful post 🖤
Really appreciate the love. I hope you find it useful.
Thanks. Very timely for a project I am working on.
Thanks as always. I hope it helps!
Very interesting and creative!!! Great tutorial as always, Thank you 🙏
Appreciate your support as always!
very interesting, great tutorial sir. Thank you very much Thank you for your time and energy
Really appreciate you taking the time to watch, thanks for the support!
❤❤❤❤❤