800HP STOCK SLEEVE K20 Honda Civic Rips A DEEP 9 Second Pass!
HTML-код
- Опубликовано: 23 авг 2024
- We take the 800HP Civic to the track to see what we can do with backup parts. The stock sleeve K20 is powered by 11:1 TRAUM Pistons, a 4Piston RR3 Camshaft, DW Fuel setup and Action Clutch Twin Disk. The first pass we had crankcase pressure issues but tried to resolve it the second hit.
The Turbo K20 is proving to be a stout engine. If you're looking to build a fast K swap car, look no further than a K20A2 or a K24A2. These 2 motors are ridiculously strong compared to their older B series counterparts. This thing will fly when it's completely sorted!
BUY NEW SHIRT HERE HERE ► shop.humbleperf...
Support Us / Buy Parts ► shop.humbleperf...
Facebook ► / humbleperformance
Alex Instagram ► / humbleperformance
Kenny Instagram ► / awdk20kenny
Falo Instagram ► / falotech
Manuel Instgram ► / manuelfabrications
Bolo Instagram ► / jonny2trill
I still remember the time you guys helped out Kyle "boostedbois" that's how I got introduced to your channel.. love the content 10/10
Medium Buttery 🙌🏻
Hey Guys, love your work. Watching every week from Australia. Just wanted to give you guys a tip for drag strip. After your wheel burn out before your pass I see the boys fanning the door to remove the smoke. Take a battery operated blower like a Milwaukee or Dewalt style to blow the cab out it will get the smoke out quicker before the pass. Cheers boys keep up the videos, keep pushing it and stay humble. 🙏👍🏻
Another one! NICE!! But I gotta give it to KENNY for that rolling interview @5:30 hahaha 👍 #WorkHardStayHumble
Big shout out to Alex and the entire Humble staff & family! I'm old school, and remember the days of the late 90's... where friends helped turn wrenches and put together cars like these type of builds... fun or bust!! Keep up the good vibes and the great content you are providing!
There is no way you will ever go 9.1. Impossible Haha get it son
9.1 stock
Congrats on the videography, the first minute of this is EPIC!
A lot of people run stock sleeves on a built motor… "Other people don't show the behind the scenes" shots fired at whoever you're talking about
Fr they mocking a stock K24 when they fully built
Just fyi they ran 9s on stock motor just sayin ... they just put built motor in this car
Killed the intro! You guys are killing it.
Frls huh they intro dope as shi
Sounded like the white car was spinning in 2nd gear. Very cool the amount Of power these are making.
Your crew is just the right brew .. can't get enough of what y'all do 'REAL'
Bad ass guys! That last pass with no fire jacket is a no no.
Brilliant, you can see & hear the power it's putting down at 10:53. Well done!
You guys are such an inspiration! Thanks for bringing us great content! God bless 💯💪🏼🚗
and this is why i will definitely drive uo to Tulsa from FL to get my car tuned by Alex the BEAST
Humble Performance, Don't apologize for shit. You do what you have to do to go fast. If people don't like it, then fuck them. God bless!
You guys are doing great keep pushing it Good run
Haters keep hating the most motivational shit they can say Alex a beast best team! Humble Performance!!! Work hard stay HUMBLE!!!
I would love to do pistons and rods on by boosted b18c, not sure what it would cost though
Man You guys are real inspiration Big respect to You guys!! Saludos de México 🇲🇽
You guys at Humble especially Alex with his speeches , MOTIVATE me and many others!!! Problem is my wallet don’t agree! Anyhow Thanks for the 🔥🔥 weekly content!!🙏🏻🙏🏻
Love all of your content!!!
i just come here for the intro music
South Africa 🇿🇦
You boys rock !!
Topo beatin that blazer was great!
making history humble!!
Stock sleeve the only thing saving that motor is the tune y'all really pushing y'alls luck with the stock oem sleeves but great job to the tuner aka Alex
Hahaa GodDamn He Made 🤣 So proud Of Pagan Good job Great Team 🤣
🤩🤩
Alex's pep talks are great lol
I find him to be very emotional and dramatic, reminds me of a girl.
@@handyman3320 damn thats a bit harsh. The only thing I would say is dont give haters any time of the day especially on their channel who cares. But I love their passion
@@Teglove Alex is super dramatic, but who cares. I think he's funny.
Hey just looked at your channel If you go to my videos you'll see a cast manifold that i had ported. Does it make scene to make a tubular header? will i see any gains? what do u charge for something like that?
@@handyman3320 what motor what setup?
@@Teglove I like odd cars, it's for 2015 Volvo XC70 3.0 T6 engine
Duro! #Palosmmb Keep it up!!! 💪💪
I'm scared of my 400hp on my stock b series sleeves I couldn't imagine racing/abusing this thing.
The piston to cyl wall is incorrect try to rebuild the engine try to lower the distance and check the ring gap and use gas ported rings from total seal.
ew10j4turbo - That is not the problem.
Humble Performance Or maybe the fuel is oxigenated and cooling too much the pistons!! Too rich i like the channel keep the good work bros!! We love your videos!
@@ew10j4turbo to run the amount of boost these guys are running u have to run the ptw and ring gaps a little looser on these small engines to keep them somewhat safe which if u dont have proper crankcase ventilation like they did in this video it will cause the smoking issue ... if u watch the video after with the larger ports for the catch can it stops this issue
v6 civic you said the true but i am running more boost than they do and i dont spray oil only water vapor from weak headgasket sealing from combustion 44 psi to be specific i think you dont need Too much ring gap or cyl to wall with the correct afr. A liter of oil or more in one run is too much for a Street car Imagine that engine on the road will need a return line with a pump to the engine oil. That Maybe a broken ring or ring land. Or another problem too much crank pressure. I am going to o-ring the block and install gas ported rings next week! Lets see what happen!
@@ew10j4turbo they spraying oil cause of crankcase pressure .. once they ran the proper size catch can and proper venting the problem was gone ..
luv this content!
I need a hype man like Kenny!
Your intro reminds me of formula 1 racing 🔥🔥
Kenny out of air 😂😂😂
Fire content everytime..!!!
Helllsss yessssss let's go get them 8'syalll 🤘🤘🤘🤘🤘🤘🤘🤘😈😈😈😈💪💪💪😈😈😈
Damn I get hype watching these vids
Daaaaaamn💥👌🏼 well done!
Team strong 💪
Quick thrown together stock sleeve motor with a USED head gasket breaking deep into the 9’s!!!! Insane 💪🏽 congratulations to you guys
Thas not stock bro
Thas all for the channel
#palosmmbichooosss !
💪💪💪
Is the K20A2 motor stronger than K20Zs? Humble Performance ?
Yes
@@SuperValdez7 Why? What makes a k20A2 stronger than a k20z1?
All of the k's are some what similar, but everyone goes for k20a2 or k24a2
Is this car still holding up?
What happen with the La Lenta? The past was 🔥!!!!!! I hope your subscribers increase.
Yes sir...
Greatness go job
The interview on 🏃♂️
Ive always wondered how much does slicks weigh? well for that size?
Beast!
Maybe it’s building crank case pressure because you guys changed to the new pistons and never honed the cylinders again. Maybe the rings new seated 100%
Hit that like button people!
Pretty cool content! 😀😇😎
What's a good trans for k swap u guys use, 5speed or 6speed? And final drive?
Im in asia where we only have jdm parts not usdm.
800hp for how long boom 💥 😝
This is a Race Car , not a Grocery getter ! Boom 💥
That much blowby is the cylinder round ?
Love the content ❤️ never stop being awesome
What rods are in the engine?
17:19
Lets goooo #PaLosMMG 🔥
I need to learn spanish
Es fácil/its easy
Maybe sound like a stupid question but wat yall mean about stock slave like no block gard no nathing just piston,rods no machinery done to block sou if i get a k series just put piston rods turbo some cams and spring and retainers and i be runny lows 10?
Correct
@@deivyleon409 ditto
Love.the content just wondering what happened with the presenters love of the wankel engine....
Jumped ship?
Change the valve cover
I respect you guys but do a leak down something is wrong with that crank case pressure thats way too much.
Kemonric Little - We put a catch can and it fixed the problem.
Is he to old for imports????
Yea this is such a stock K20 everyone runs stock sleeve on a Built motor bro just capping its sad yall running a 9.3 on a built motor. Attention is all ya seeking for attention and clout. I dont care bout yall humble supporters its simple the stock k24 ran a 9.6 one pass then blew up 2nd pass 🤷♂️
The stock k20 never broke. This is still the same engine. Just added rods/pistons/springs/retainers after the 9.6
@Humble Performance why did you not try and go like a 9.5 or 9.4 on the stock motor?
You can go for it
@@humbleperformance lol
Not really. They’re limited on power with stock sleeves. If it was a sleeved block they will have 1100 hp vs 800
Yall get ppl confused with stock slave or w.e ,am sure ist not stock for me stock ist never open the engine and add a turbo o nitros w.e or nothing but if u open then engine and did all tha dont call it stock slave
You're the only one confused. Stock sleeve means it hasn't been sleeved.....
@@owenowen8155 bro thas wat the want u to belive tha shit ist sleve half way on the block with cement
@@owenowen8155 for me stock ist put a turbo on it and thas it dont even open the engine
People have made 800 on stock b series sleeves. I highly doubt their is concrete in this block. It's a stock sleeve k20. K sleeves are much stronger than most
And they didn't say stock engine, they said stock sleeve. You're complaining about nothing.