Replacing the backlighting of window up and down buttons with LED diodes, Renault as an example.

Replacing small bulbs with LED diodes in the backlighting of the window up and down buttons.
In the example, I used a switch from Renault Laguna II, Opel Vivaro, and it will look similar in many models.
Used LEDs - 3mm, 12V, white. In the case of lower voltage LEDs, you may need to use resistors. Cheap 12V LEDs may also require a resistor (they may not last long).
Checking the polarity - Autel PS100, I marked the + side of the diodes with a blue marker (you can see it after disassembling the switch).
Flux - HB036, but you can use any good-quality one - it's a matter of preference :)
Soldering iron - a cheap Chinese one with T12 tips (available under various names), thin tip.
Feel free to visit www.naprawa-laptopa.com.pl - Over 100 articles about laptop and electronics repairs!
www.smarthomekr.pl - a website about home electrical and automation.

[@warsztatpodchmurka]

Piękne dzięki, faktycznie ten system sterowania szybami jest stosowany w większości renault. Także instrukcja prosta i czytelna, wielkie dzięki.

[@elektrotechnika-krakow]

I nie tylko renault - lista pewnie jest długa - np. przełącznik kierowcy pasuje i działa prawidłowo w 10 lat młodszym Oplu Vivaro. A przełącznik tylnej szyby z laguny II w drzwiach pasażera Vivaro.

[@draconaeterus2024]

Thank you!!!!

[@elektrotechnika-krakow]

👍