Bmw E46 Injectors - How To Swap Injectors
HTML-код
- Опубликовано: 26 авг 2024
- check out this new video on how i swaped Injectors to get ready for the tune on this Supercharger build, a how to swap or replace injectors on any e46 or e36 car, just a couple of tips to make things eazy.
Dont forget to drop a like and subscribe, thanks.
Got some advice for the e46 community. When installation of injectors, use silicone spray, rubber safe or motor oil. Main thing....firmly press your injectors into your fuel rail 1st, because sometimes they won't seat on the upper o ring if you just try to press a fuel rail onto 6 injectors and it makes sure your retainer clips clip on properly as they should. Just a trial and error on my part. Just hope thus helps someone. New injectors come with new o rings. They bigger and more firm than the ones your replacing. Promise....good luck folks
Love the mods that you did man… thanks for sharing this!
Thanks, glad i could help youout, I have many more videos check them out also please subscribe
Nice. Thanks for the heads up on the how to. Need to change out mine (230,000) on em as best I know. It's time. Doggy performance and skipping/missing on #5. Surging, etc. Fuel pump here thurs. So...open her up and vanos seals and injector time.
Yeah that many miles needs a tune up, you can also have the injectors cleaned, please don't forget to subscribe for more videos
Great video. Speech is very clear. Thank you
Thank you, really appreciate it 🙏.also please subscribe
Hi, quick question.
Do you have to code these after market injectors or do they just plug and play
Plug and play
Hey bro, what did you use to block off the CCV holes in the manifold? I like the look of them and I’m tryna find a solution
I thread the plastic ports and used thread print sty plugs, check out my instagram for closer look
What difference in performance have you noticed with aftermarket vs. stock injectors?
In order to use any after market injectors you need to tune you ecu to use them, so it gets expensive if you start running multiple tunes, but OEM is always better than any ebay ones, if you go aftermarket make sure it’s a known brand
OEM por vida holmes@@acef_performance8416
Perfect Video
Thanks really appreciate it, please subscribe really helps the channel grow
Greetings, Just tried pulling the filters out of a set of injectors recently replaced. unable to get even One of the filters out! Not as easy as it seems.
Did you code the new injectors before starting the engine
I tuned the car for the supercharger, but no coding on my part
i have priming cylinders 3 and 5 only on cold engine, for 20sec.. without waving engine. damage injectors can do this?
Not sure what you are asking
@@acef_performance8416 damage injectors can work wrong only on cold engine?
I have a 325i with 30i intake manifold and 30i injectors and 30i ecu program. What do you think, would it work if I put back the original 25i ecu program, will that work with 30i injectors?
Yes it will work
Do you know of any service interval for the injector seals? 🙂
I would just do them every couple years, oring do get hard over time, if you base it off miles it’s to difficult because most people don’t own the car long enough or even put in the miles, but if you have never done them I would recommend you do it to be on the safe side
@@acef_performance8416 Mine has 83,000 and is 20 years old... might be time 😁
I just changed them mine a year ago
There is no coding for E46 injectors?
Even if it's not Bosh or siemens?
yes there is
How cup or close top manifold hold?
Not understanding the question
Where did you buy those enjectors can you leave the link ?
used of a local guy
I heard Porsche injectors work really well on E46
clownkiller0629 thanks, I will have to look into this
@@acef_performance8416 check it out
ruclips.net/video/oYpaI-4usbk/видео.html
@@acef_performance8416 then I told this guy to get them...
ruclips.net/video/7YaUgWbjiz4/видео.html
Hey I'm looking for cheap injectors to run on E85 with my 170hp E46 do you suggest Some?
I know there is a E85 flex kit made by “Ape Flex Fuel” it will work with your stock injectors check them out this is the link.
www.apeflexfuel.com/store/-p259859148
Can u put 330i injector on a 325??
Yes direct replacement
M50 intake manifold swap how hard to do it into e46??
No not to difficult, just some tight spots, no different than a e36
Do I have to disconnect the battery terminal (ground) before doing this?
No, not necessary
What type of oil filter cap is that
It's off a e36 I swapped the oil filter housing and cap from an e36, fits with little modification
What type of mod what do I have to do to make it fit
It's from the e36 I swapped the housing with the cap from e36, it fits with little mod also it's all aluminum now no plastic
E36
@@noahrivers6941 you have to drill and tap a port for a oil temp sensor e36 only have on 1 port for oil pressure but E46 have 1 for oil temp and 1 for oil pressure, also now you won't have anywhere to mount your power steering reservoir since it usually mount to the oil filter housing, him me up on Instagram I can send you some pictures @lui328i
Put your oil cap on don’t want anything falling down there bro 😂
For sure 😂
Thanks
No problem
Are you supposed to somehow clean the fuel that comes out or it’s okay to let it dry up?
What do you mean, if your asking about cleaning the injectors,you should use brake cleaner
I understand the question now! Try and catch as much as possible the rest will dry up
@@acef_performance8416 alright thanks man
Do you know much something like this will cost me at a mechanic shop?
To what exactly
Website for buy pls. Thx
These are from Vf engineering
I know this is old but that's bro
What 🤔
@@acef_performance8416 *thanks 🤣🤣
No worries I’m here to help! 👍
@@acef_performance8416 is that a ccv on ur e46?
No ccv, I deleted and plugged the ccv on the Intake manifold, I have the valve cover going to a catch can