Excellent guide and walkthrough! Picked up a second hand freezer that had a bit of a leak and some mould spots. Followed the guide so hopefully I have done it right and this solves my problem!
Hotpoint rls175p fridge seal replacement gasket ordered from the hotpoint spares site. Was extremely difficult to fit. The grooves to slot it back in did not match the old ones at all and looks to be a 3rd party part. The original part was white and the replacement was grey with different grooves.
I am currently looking for how to do this on a russian Beko refrigerator - there are no parts or instructions for it. And on Hotpoint everything is so simple
I have noticed my seal has split at the bottom hinge and the magnetic strip is exposed. It has also frosted at the back at the top going down about a third. Do you think the door seal be the cause of the frosting? I have a Hotpoint RLA34 fridge.
I've got same problem with frigde gasket. I ordered a new gasket and I followed the steps how to remove it ..but surprise ...my gasket has adhesive tape on it ...and I tried to take it out and fix the new one with adhesive tape but didn't work .. I will be happy to give an advice what to do... Thanks 🙏🙏
We have a HMB313I and the seal doesn’t look like it will come off as easy as this one. I’m sure it’s glued on - please help as I don’t want to wreck it. I’ve bought the spare seal already but nervous about damaging my fridge altogether. Any advise please...
Misleading video. It may be a "breeze" for that particular model, certainly not the case for others. Mine is Hotpoint RFAA52P. I gave up after struggling to remove old seal. Will be returning replacement.
Hi i have a hotpoint fridge freezer model MSZ 703 NF D UK How do i remove water dispenser to replace the Broken water pipe that runs down the inside of the door as its broken and leaking water. PLEASE CAN YOU HELP....
hi marc ,nothing in my life has ever been as easy or as simple as it should be so i have an old hotpoint rfa52p and my freezer door seal is knackered which is leading to excessive ice build up, only thing is removing my seal is nothing like the one in this vid, my seal seems like its bonded in place as when i pull it off its looks like its glued in place and the glue is tearing off with some sort of intenal foam attached to it also , any ideas?
Model RFAA52P bought a new freezer door seal and it does not go on anything like this!!! Had to really tug the old one out with a ripping sound and had to use levers to enable the new one to be inserted into the door. Now can't close the door! Maybe your man could come and show us how to do it? Not happy
I just replaced a seal for a RFA52. What an absolute pain in the @r$£. No instructions with the spare. Seal appeared to be glued on so you can imagine the effort f getting it off and trying to slide the new one in place. I dare Hotpoint to do a video for this model 🤬🤬😁😁
Hi Julie This can be quite common and potentially be happening to your appliance. We would need a little more information on this issue, but it does sound like your compressor is running at 100% all the time when it doesn't need to be. Give us a all on 03448 224 224 so we can help assist further. Hotpoint Service
@@HotpointCustomerServiceUK I found out already, apparently its losing gas and being over 15 years old I retired the poor old dear and went and baught a new fridge. Thanks for the offer to help though 🤗
Hi Marc Unfortunately that number isn't the appliances model number....R134A is the type of Gas the appliances uses but not the model number. Inside of the door (or behind the salad trays) there should be a white sticker with the model number on. Let me know and I'd be happy to help find the part you're looking for. Also, you might find the assistance needed at parts.hotpoint.co.uk/ Regards Hotpoint Service Team
![[27] Perfect Door Seal Corner Joints](http://i.ytimg.com/vi/t4Ea0nVtCpo/mqdefault.jpg)
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
I need to borrow that note for testing
I have to come back to this channel every month as my 3 Hotpoint appliances give me problems every month!!
Excellent guide and walkthrough!
Picked up a second hand freezer that had a bit of a leak and some mould spots. Followed the guide so hopefully I have done it right and this solves my problem!
Excellent video. Simple and to the point
my hotpoint freezer seal has ripped i have the new door seal just needs replacing now this video has helped
Just developed that problem, timely advice. Thanks.
I could watch this man explain freezer seals to me all day. Sorry/not sorry
I'll have to take my fridge to Great Britain, so I can test it with a ten pound note. All I've got are lousy ten dollar bills :-/
If you send me your 10 dollar bill I’ll send you a 10 pound note... I promise.
@@davidmccormick4319 you're on. The money's in the mail, plus an extra $5 for shipping and handling.
Thanks, i can start replacing now🤗
Thanks for clear describtion
So what must I do if the door stiil doesn't close?
Come on man you didn't put the note after putting up the new seal. That's half advertisement.
I need to borrow that bloke for further testing
Hotpoint rls175p fridge seal replacement gasket ordered from the hotpoint spares site. Was extremely difficult to fit. The grooves to slot it back in did not match the old ones at all and looks to be a 3rd party part. The original part was white and the replacement was grey with different grooves.
Thank you British Ben Affleck!
Have known some makers make you buy the whole door to get the new seal
This may help as I picked up a mini fridge for free with multiple holes and mold in the seal
He looks good.
I am currently looking for how to do this on a russian Beko refrigerator - there are no parts or instructions for it. And on Hotpoint everything is so simple
I have noticed my seal has split at the bottom hinge and the magnetic strip is exposed. It has also frosted at the back at the top going down about a third. Do you think the door seal be the cause of the frosting? I have a Hotpoint RLA34 fridge.
I've got same problem with frigde gasket.
I ordered a new gasket and I followed the steps how to remove it ..but surprise
...my gasket has adhesive tape on it ...and I tried to take it out and fix the new one with adhesive tape but didn't work ..
I will be happy to give an advice what to do...
Thanks 🙏🙏
Have you a video on how to sort hotpoint fridge door RLAAV22K THAT HAS DROPPED?
If you're fitting a full-height freezer seal, you'll need somebody to help you. It is not the quick simple task portrayed in the video!
I cant find that ten pound test note on your website?? is it out of stock ?
I tried it, but it seem to pull other foam stuff behind it so I stopped. I have an integrated tall fridge, does it use the same method? Thank you
same as me. it seemed to stuck to some kind of foam. any advice?
I live in Russia and I don't have a 10 pounds note, how do I check if the seal is okay?
Nice idea iv done
We have a HMB313I and the seal doesn’t look like it will come off as easy as this one. I’m sure it’s glued on - please help as I don’t want to wreck it. I’ve bought the spare seal already but nervous about damaging my fridge altogether. Any advise please...
Mines the same
My own fidge door was forced out how can I replace the door
Misleading video. It may be a "breeze" for that particular model, certainly not the case for others. Mine is Hotpoint RFAA52P. I gave up after struggling to remove old seal. Will be returning replacement.
Thanks for walk-thru, great stuff 👍Will it work with a £5 note? 😊
Hi i have a hotpoint fridge freezer model MSZ 703 NF D UK How do i remove water dispenser to replace the Broken water pipe that runs down the inside of the door as its broken and leaking water.
PLEASE CAN YOU HELP....
hi marc ,nothing in my life has ever been as easy or as simple as it should be so i have an old hotpoint rfa52p and my freezer door seal is knackered which is leading to excessive ice build up, only thing is removing my seal is nothing like the one in this vid, my seal seems like its bonded in place as when i pull it off its looks like its glued in place and the glue is tearing off with some sort of intenal foam attached to it also , any ideas?
I have the same fridge and the same issue. How did you resolve this?
Same here just bought a seal and feel like I am going to destroy it getting it off, did you sort it out?
Would a €20 work ?
Mine is beko. The old one is literally glued in place and in behind the metal of the fridge. Tried it and gave up before I got into trouble
i need this. do you ship international?
Model RFAA52P bought a new freezer door seal and it does not go on anything like this!!! Had to really tug the old one out with a ripping sound and had to use levers to enable the new one to be inserted into the door. Now can't close the door! Maybe your man could come and show us how to do it? Not happy
I never pull out 😎
How do I remove the doors to fit through my door?? I have the 2016 double door bottom freezer...need help ASAP PLEASE
Hello Chris,
Please can you confirm your model number so we can advise further?
Kind Regards,
Jack
I just replaced a seal for a RFA52. What an absolute pain in the
@r$£. No instructions with the spare. Seal appeared to be glued on so you can imagine the effort f getting it off and trying to slide the new one in place.
I dare Hotpoint to do a video for this model 🤬🤬😁😁
Followed this to the letter. Door still won't keep shut grrrrr.
Is this why I have to keep my fridge up as cold as it can go!?
Hi Julie
This can be quite common and potentially be happening to your appliance. We would need a little more information on this issue, but it does sound like your compressor is running at 100% all the time when it doesn't need to be.
Give us a all on 03448 224 224 so we can help assist further.
Hotpoint Service
@@HotpointCustomerServiceUK I found out already, apparently its losing gas and being over 15 years old I retired the poor old dear and went and baught a new fridge. Thanks for the offer to help though 🤗
@@iamthatiam44444 After 15 years of service I think it earned it's retirement! :)
R134A looking for freezer seal
Hi Marc
Unfortunately that number isn't the appliances model number....R134A is the type of Gas the appliances uses but not the model number.
Inside of the door (or behind the salad trays) there should be a white sticker with the model number on. Let me know and I'd be happy to help find the part you're looking for.
Also, you might find the assistance needed at parts.hotpoint.co.uk/
Regards
Hotpoint Service Team
N
This is BS, for this particular model it might be easy, but definitely not for other models