Feel free to jump to any part of the video! 00:00 Start 00:50 Intro 01:25 Demo Tone 1 (Kupercaya JanjiMu - NDC Worship) 02:32 Create the tone 14:17 Demo Tone 2 (Guitar Only) 14:45 Demo Tone 3 (Ascending to Epicness - Gary W) 15:37 Outro
Awesome Gary, I really have the hard time to set clean sounds on my gadget. This video gave me ideas how to get clean sounds easier. Funny, distortion/ overdrive is a bit easier to set on Bias Fx2/ Bias Amp for me. I'm NOOB I guess 😅. Well, stay safe & God Bless you & your family, Gary. Rock On!!
Thank you Strat Tweak for the kind comment! I agree with what you said, overdrive sound is somewhat easier to get on Bias FX2/Amp2, getting a good clean tone may require more effort and tweaking in the software and that could cost some time! Thank you once again, God bless you and your family too 😊😊
Hello Gary I'm a bass player and I found your video very instructive and it enabled me to make a giant leap forward in my approach to sound construction with BIAS prduiots for IPAD: Thank you 1000 times. I subscribed to your channel to benefit from all the knowledge you so generously share. A little indiscretion on my part: I think the little wooden stand on which the iPad stands is super cool! Can you tell me where you bought it, I'd love to have one like that! thanks for everything
You are very welcome! Glad I could help! I built the wooden stand myself using Laser Cutter 😁, it's made from some multiplex. Basically all it does is just cable management for the Powerbridge and the iRig Pro Duo. You could make a simple box and create holes on its sides to get a similar function. Hope this helps!
Never managed to get a really clean tone on the ipad. Tried BIAS FX2, THU, Jamup, GE labs... it always comes with a little dirt (drive), no matter which amp model I use (or even by passing). Is this normal? Thank you for the video.
Definitely you would have to check the input gain on your interface. It shouldn't sound distorted without any effects or amp simulation. Only then you can get really clean tone without any fuzz on the iPad.
Hi! I am wondering how do you set up the gain on your audio interface some say set it before it clips but some also say set it low as possible. Thanks🙏
Are you able to use the dual cable to charge the iPad and use the interface? After updating to iOS 17, the cable does not work for charging, only for processing the interface.
Hey bro you have any tips for a nice clean overdrive when soloing?thanks for the help cause I use bias fx 2 as my main effects panel,I have a boss gt100 which I run my iPad to my gt100 while on live stage,bias fx just sounds amazing.
Hello, I made a video about clean overdrive tone as well, you can check it out here ruclips.net/video/bq94zc41acI/видео.html&ab_channel=GaryW Hope this helps!
Hello! I'm new in this app and I have a problem with a volume when I play backing track on RUclips... is too loud. I can set up volume down on my iRig interface and volume up on amp by settings... is somewhere option set up volume separately onlybfor backing track? It's basic thing but I can't find it...
Feel free to jump to any part of the video!
00:00 Start
00:50 Intro
01:25 Demo Tone 1 (Kupercaya JanjiMu - NDC Worship)
02:32 Create the tone
14:17 Demo Tone 2 (Guitar Only)
14:45 Demo Tone 3 (Ascending to Epicness - Gary W)
15:37 Outro
Well done Gary. I have Bias Amp/Effects on my iPad and need to revisit it! Sounds great!!
Thank you for the kind words Fletch! I am enjoying Bias Amp and FX very much on my iPad, I can just plug and play, and get lovely tone every time!
Awesome Gary, I really have the hard time to set clean sounds on my gadget. This video gave me ideas how to get clean sounds easier. Funny, distortion/ overdrive is a bit easier to set on Bias Fx2/ Bias Amp for me. I'm NOOB I guess 😅. Well, stay safe & God Bless you & your family, Gary. Rock On!!
Thank you Strat Tweak for the kind comment! I agree with what you said, overdrive sound is somewhat easier to get on Bias FX2/Amp2, getting a good clean tone may require more effort and tweaking in the software and that could cost some time! Thank you once again, God bless you and your family too 😊😊
Hello Gary
I'm a bass player and I found your video very instructive and it enabled me to make a giant leap forward in my approach to sound construction with BIAS prduiots for IPAD: Thank you 1000 times.
I subscribed to your channel to benefit from all the knowledge you so generously share.
A little indiscretion on my part: I think the little wooden stand on which the iPad stands is super cool! Can you tell me where you bought it, I'd love to have one like that!
thanks for everything
You are very welcome! Glad I could help! I built the wooden stand myself using Laser Cutter 😁, it's made from some multiplex. Basically all it does is just cable management for the Powerbridge and the iRig Pro Duo. You could make a simple box and create holes on its sides to get a similar function. Hope this helps!
@@Gary_W Many thanks bro !
Hallo bro !! This video Shoot with lumix g85 ?
Yes it was shot with the G85. From 2019 most of the talking head videos are shot using the G85 😊
Never managed to get a really clean tone on the ipad. Tried BIAS FX2, THU, Jamup, GE labs... it always comes with a little dirt (drive), no matter which amp model I use (or even by passing). Is this normal? Thank you for the video.
Definitely you would have to check the input gain on your interface. It shouldn't sound distorted without any effects or amp simulation. Only then you can get really clean tone without any fuzz on the iPad.
Hi! I am wondering how do you set up the gain on your audio interface some say set it before it clips but some also say set it low as possible. Thanks🙏
Basically I strum as loud as I can on my guitar, especially with palm mutes, and then adjust the gain until it no longer clips. Hope this helps!
@@Gary_W thanks! I wish you still create guitar content. I remember watching your videos on bias fx when there are still lockdown😅.
@@gc_p I want to make more guitar content in the future, but maybe on separate channel. I will let you know.
@@Gary_W that would be nice🙏
Are you able to use the dual cable to charge the iPad and use the interface? After updating to iOS 17, the cable does not work for charging, only for processing the interface.
I haven't tried it again, will let you know once I tried it.
does it work with iRig2?
Hey bro you have any tips for a nice clean overdrive when soloing?thanks for the help cause I use bias fx 2 as my main effects panel,I have a boss gt100 which I run my iPad to my gt100 while on live stage,bias fx just sounds amazing.
Hello, I made a video about clean overdrive tone as well, you can check it out here ruclips.net/video/bq94zc41acI/видео.html&ab_channel=GaryW Hope this helps!
Hello! I'm new in this app and I have a problem with a volume when I play backing track on RUclips... is too loud. I can set up volume down on my iRig interface and volume up on amp by settings... is somewhere option set up volume separately onlybfor backing track? It's basic thing but I can't find it...
Hello, there is an output slider on the bottom right of the app, you can control the output volume there. Hope this helps!