Rear Led Bumper Reflector Light Install On My Honda Civic Type R (FK8)
HTML-код
- Опубликовано: 8 сен 2024
- Here is a video of me replacing my rear bumper reflectors with actual working led lights. Hope you guys enjoy!! Please like, comment and subscribe!
Item bought on amazon.
Link: www.amazon.com...
Great video bro those lights are dope as hell i love them
Thank you so much!! That means alot to me!!🙏🙏🙏
Your the best bro i cannot wait to get mine i want the sonic grey pearl
@@damianpeter80 oh man that color is super dope and looks super clean!!🔥🔥 I hope you get it soon and be part of the ctr gang lol
@@sick.fk891 im going to try to make it to Honda day when you guys come down
@@damianpeter80 def!! I'll see you there!! Maybe I'll even catch you in my video😁
Great job, been waiting to install mine just didn't know where to connect the wires to!
Thank you! Hopefully my video was good enough lol ... if you have any other questions dm me .. I have no issues trying to help as much as possible!
@@sick.fk891 thanks a lot! Your video helped with how to route the wires and also how to remove the rear grille. I was concerned about wiring but you showed where to connect each of the wires as well, and your finished install looks amazing! Can't wait to install mine while using your video as a install guide!
VERY NICE MOD BRO. KEEP UP THE GOOD WORK.
Thnx bro!! Appreciate it!!🙏🙏
Those reflector lights are nice but those taillights are SICK!!!! I'm gonna buy me a set of these reflector leds to retrofit into my Express Van taillights since theres nothing out there for them that look modern, sometimes u gotta improvise 💯💯👊🏾👊🏾
Thank you so much!! I love them!! Def bro on the improvise!! Sometimes you have to do what you have to lol
Just to be sure the black wire goes with black, yellow goes with yellow, white goes with green, and red goes with red??
I love it!! Keep up the great work!!
How did you get this program on your radio display or installed it???? Can you please tell me something about this??
Broo that small upgrade is awsome. I love how it goes with the turn signal..very different 🔥🔥 nice detailed video to on the install.
Thnx bro!! That means alot to me!!🔥💪💯💪🔥
DOPE!
Thnx homie!!🙏🙏
Yeah that’s sick
💪🔥💯🔥💪
I Hooked mine up and they just blink no sequential but there the same as yours do you have any suggestions what wires did ya hook where
If you can hit me up on IG sick.fk8 so I can try to see what’s going on.
Sweet!
Nice video I love the light so you mind telling me where you got those yellow lights from turn signals thanks
Sorry for the late reply but I got them from opt7lighting on Instagram
Nice!
Thnx!! 😁😁
So sick!!😍😍🔥🔥
Awesome video. Any specific tricks on getting the fake vent off? Nice to see an installation video with no bolts since I also don't have any bolts on mine (that I know of)
Best way I found is from the inside of the bumper pushing the tabs out. That did the trick!💪💪
@@sick.fk891 thank you! I'll give that a shot :)
🔥🔥🔥
🙏🙏🙏
Thanks for the helpful video
Of course!! Thnx for taking time from your day to watch my video!!💪💯💪
@@sick.fk891 can you tell me your facebook ? I have someone question to ask about fk8 ..if you don't mind
@@canonking8930 facebook.com/SickFk8-388617808435541/
That dope.
Thnx bro!!
Hey bro what kind of wire connectors did you use? I used those ones you showed in the video but it doesn’t work.
They were called quick splice connectors ... i hope this helped you
Great!👍
Thank you!!🙏🙏🙏
What's up brotha, so I just got some reflector leds for my hatchback sport and I was attempting to push out the clips from inside the bumper like how you showed in the video. However those clips were such a pain and I wasn't able to push them out. I just called it quits for the time being cuz I didn't have too much time on my hands at that time to really work on it.
Can you explain exactly what you did to push and get the clips off from the inside of the bumper ? Thanks in advance ❤️
I understand the frustration!!! I was only able to push two of the clips through. At that point I went back to the outside of the bumper and with pressure pulling on it I was able to remove what I needed to get the job done. Just please be very mindful and careful not to break the clips. From the inside I used a flat head with a microfiber towel at the end and pushed the clip in and downwards till I got it out. I hope this was helpful. Any other questions add my Instagram @sick.fk8 and shoot a message .. ill try my best to walk you through it! Thnx again for watching my video!💪💪 Stay blessed!
@@sick.fk891 thanks for the quick response brotha! I appreciate you taking time to quickly respond. I'll definitely try that out and if I have any more questions I'll shoot you a msg. Take care ❤️
@@plakatbettas anytime brotha!!!
Badass ... i just bought a 2020 Type R ..Where did you get the tail lights? What brand are they? Did you disconnect your center
Brake light? Are the brake lights in this video the same brand? Thanks bro
Thnx bro!! ...link it's in the description if you want to get it! Cheap mod but looks so good!! Wiring was spliced into the rear break lights ... didnt touch the center break light at all
sick. fk8 where did you get the brake lights ? Amazon?
@@marcambrosius5478 yes amazon. Here is the link:
www.amazon.com/gp/product/B07RP4QD69/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
@@marcambrosius5478 my taillights I got from opt7lighting on Instagram
Cual es el nombre de las luces que tienes en tu carro me gustan quiero comprar unas asi
Opt7lighting on Instagram
I didn’t get these exact lights, but some other brand from amazon. The apparently kept blowing fuses in my civic so I had to get my car serviced. Anyone know anything that might help? I have the 2020 hatch ex
Wow I wish I could help .. if I come across anything I'll def let you know
sick. fk8 thanks man! I appreciate it
Nice!! What did you used and how you took off that vent grill????
Thank you! I used a flat head screwdriver with a microfiber towel on the end to push the tabs from the inside of the bumper and then used a plastic removal kit to pop it enough from the outside to get the job done!
Seems like they have a delay when using the signal. They die for a good bit before turn on again.
Its a safety feature
Dopeeee
Thnx bro!!🙏🙏🙏
Maybe a dumb question but what kind of wire taps are you using?
They were called quick splices! Hopefully this helps!! Reach out if you have any questions.
That is dope semd me the link ill cop those i noe they fit in my car
Check this out at Amazon.com
GTINTHEBOX Red Lens Full LED... www.amazon.com/dp/B07RP4QD69?ref=ppx_pop_mob_ap_share
Here you go bro!!💪💪
I like
Thnx bro!!🤜🤛
Hi, from where did you buy rear lights ? thanks
Hello I got them from amazon.
www.amazon.com/gp/product/B07RP4QD69/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1&th=1
Link is also in the description just in case!
great installation man! wanted to watch every minute of the video but the music is too loud for me to hear you talk
Yes I apologize for that! If you need any help send me a dm on IG : sick.fk8
I’ll help any way I can! Thanks for the support!
Do you have the opt7 smoke taillights?
Yes I do!! They are awesome!!
where’d u get the tail lights bro
Hey bro!! Opt 7 lighting on Instagram.
How difficult was this installation? I got the same lights and I want to know what to expect?
Thanks
From 1 to 10 I say a 6 ... wasn’t bad at all .. removing the taillights was a little scary... other then that wasn’t tough at all!
What’s the point if you don’t show how the wires got connected! 🤦♂️
Idk if you watched the whole video but go to 10:16 and I explain what wire goes to what wire for my tail light since I do have an aftermarket tail light. I used quick splicers to make the connections … it’s been 2 years and no issues at all!
@@sick.fk891 I was hoping to see the process recorded not after you connected it. Idk if you got my point, thanks!
@@darknights627 it’s just a quick splice connector … very easy to use … if you would like a video showing how to use them I can do that for you!
@@sick.fk891 that would be great because I have seen many videos none of which explained the process in details to those who are not familiar with the process like me.
@@darknights627 ok no problem … I’ll make a video soon …. I’ll be doing an update video of the type r hopefully in the next couple weeks and then I’ll make the video on how to use quick splice clips for you! Thank you for watching again! I appreciate it! 💪🏼
Bumper removal is way easy bro
I have to try it one day!
I got the same lights for my Si from AliExpress. Dude, the music is too loud. It's drowning you out in the beginning of the video.
Yea sorry about that .. sounded different while editing ... my apologies... if you have any questions let me know ... I'll answer it to the best of my knowledge! Thank you!
@@sick.fk891 No sweat. Good luck with the channel.
@@DaveOrtiz thank you sir! Really appreciate it!!🙏🙏
didn't explain the wiring thoroughly!!!
Sorry ..if you have any question I'll try my best to answer it or take you down the right path!
Tu type R no quema, cuh.
😂🤣
Are running light is brake light
I’m sorry … what’s your question?
How did you get this program on your radio display or installed it???? Can you please tell me something about this??
You need to get a hondata flashpro to do base maps or tune your car. After you have that and you go through the process of putting a base map and your ecu has been unlocked you have to jailbreak your stock radio and install Honda hack using your laptop. Once you follow the steps online that they give you all you do is reboot the system and boom you have the gauges on your car. It is using like an app on your screen. I’ll see if I can find a video and send you the link. Hope this helped.
@@sick.fk891 I want to thank you for your help 👋👍
@@dragankucic2548 anytime! I try to as best as I can.
How did you get this program on your radio display or installed it???? Can you please tell me something about this??
Wow sorry I never got back to you on this. I actually stopped RUclips for a while but I’m back … if you still need help with this contact me on IG and I’ll try to help you as best I can. @sick.fk8