Chinese Fuel Injectors Vs OEM Bosch
HTML-код
- Опубликовано: 12 сен 2024
- #shorts
BUY MERCH HERE- bit.ly/FPMERCH
Merchandise Purchases will be going towards sponsoring vehicle ride alongs for Veterans and First Responders!
For Veteran Submissions Email - ForVeterans@fasterproms.net
FOLLOW US ON INSTAGRAM- / fasterproms
FOLLOW US ON FACEBOOK- / fasterproms
Send Fan Mail!
12961 44th St N
Ste B
Clearwater FL 33762
FOR PACKAGES AND SHOP INFO- www.fasterproms.net
FOR CAM'S AND SUPPORTING MODS- www.briantooleyracing.com
KEITH'S SHOP- www.keithspitstop.com
NICK WILLIAMS- www.williamsperformance.net
WRAP PRO'S- wrapprosllc
Thanks for swinging by the Fasterproms RUclips channel! Drop a comment below, like & subscribe!
That was really good you show that because a lot of people skip out on those sort of things and then they wonder why They don’t make power or their engine blows up… One of RUclips’s better videos you’ve made
You forgot the chineseium +/- 200% tolerance factor
😂😂😂😂 So true! I got hold of some as an online scam. The ad said Bosch 1000cc injectors. When I took my car for a test drive, thinking that it would be fine with my previous tune on 1k cc units, it went dead lean as soon as I built boost above 5k rpm. I went back and looked at the flow chart sheet and it even said 860cc! I'm like wtf? I didn't buy 860cc China injectors ffs! These had a Bosch logo and part # on them too. Very clever.
If you can find an interpreter, the de-structions say they require 1200 psi at the rail to flow 42 LPH...
Unfortunately their labeling ain't something you can trust. I was actually impressed how equal those three were even though they were no where near the promised delivery.
Fuel injector tester, one of those great tools to have around for modern vehicles. Considering with the ethanol in the fuel. They tend to gum up much faster while sitting than before said introduction. I bought mine cause I have a number of fuel injected cars that tend to sit for long durations unused. So before I fire them back up, I pull the injectors and run a clean cycle, and often find i need to rebuild the seals at the same time. Both internal and at the fuel rail. Definitely don't want to have the "Tom Bailey" experience with seal failure.
Stop using the term gum for alcohol. Alcohol doesn't make gum. It cleans the dirt out of your fuel system and might get stuck in the injectors. Gas is dirty not alcohol
Performance and cheap I learned long ago do not go together.
Lebron James disapproves of this video
Come back Jeremy. We all miss you. Hope all is well brother.
Had a similar experience with cheap 80lb Dekas. New out of the box I couldn’t get the car to run right. Had them tested, and found out they would start cutting out as they were turned up. And the spray pattern was garbage. Replaced with FIC injectors and all problems went away.
I have the same injector tester, it works pretty good. Downside is is only does 6 injectors at a time but o well. It worked for what I was using it for. Great video showing real vs fake injectors, I love all the tech you guys share on your channel. Keep up the great work!
Chinesium - Rare Earth Alloy
Pros - Maluable into any shape, size or function.
Cons - Malfunctions 98% of the time.
I wondered why my turboed engine blew up on the dyno
All hail our wonderful Chinese trade partners. Just makes ya feel all warm and fuzzy inside...Like a rotten peach...
Good to know, thank you!
I keep hearing about the supply chain but without the man no one talks about bringing our manufacturing back here. Detroit was once the richest city in the world because we made stuff starting with car parts. communism sucks!
The real problem with the supply chain is the democrats and the epa..
Keep up the good work man
I had the same experience with a MAF for my 2.8L and 3.2L BMW engines. I had 3 sensors, so I did some 2nd gear pulls down the road and logged the g/s of air flow. The two 20 year old OEM sensors were very close to each other. The Chinese one read way higher, but then plateaued at 4500 rpm and then started dropping. Needless to say, the computer was very confused. The odd part is it didn't show up when revving in neutral b/c it wasn't looking the MAF. When I went to the dyno, it ruined my day.
I got hold of some as an online scam too. The ad said Bosch 1000cc injectors. When I took my car for a test drive, thinking that it would be fine with my previous tune on 1k cc units, it went dead lean as soon as I built boost above 5k rpm. I went back and looked at the flow chart sheet and it even said 860cc! I'm like wtf? I didn't buy 860cc China injectors ffs! These had a Bosch logo and part # on them too. Very clever crooks.
Just pulled 6 new Chinese injectors out of my truck. It never ran so bad will stick with Japanese or USA.
Bosch is German.
I got hold of some as an online scam. The ad said Bosch 1000cc injectors. When I took my car for a test drive, thinking that it would be fine with my previous tune on 1k cc units, it went dead lean as soon as I built boost above 5k rpm. I went back and looked at the flow chart sheet and it even said 860cc! I'm like wtf? I didn't buy 860cc China injectors ffs! These had a Bosch logo and part # on them too. Very clever crooks.
Glad your posting stuff again. I believe I speak for everyone, we have missed your content
What's going on with lasses Jeep
Cheap
Fast
Reliable
You may only choose 2….
I got some of those cheep 42lb/hr injectors for my 4.6 ford, the motor love them... and the axles don't.
That's cool that this video came about cause I just bought a autool injector cleaner/tester and I've been using it this weekend and it's awesome!!!
This is why I use higher end injectors that are matched sets. Stuff like RC's are great.
Guys just spend the money on them. I bought ebay “genuine” fuel injectors and for the first month or two it was perfect but i can tell now as acceleration is awful. Sometimes when im pressing the gas the car wont go over 10-15mphs (assuming the flow holes are clogged and then the pressure is finally causing them to clear) it sucks but spend the money on the ones that are like $100 PER INJECTOR.
I can't even trust them to measure a t-shirt correctly I'm definitely not going to trust them in any of my car parts.
I've noticed most gun scopes are made in China. . Also found out my F150 wheels are chinese made,
Good job… how’s Laz’s Jeep going ?
not bad if saving fuel was the objective lol
No truer are the words, "You get what you pay for."
I see no problem here…. Leaner is meaner.. right?! Lol that’s too funny…. There’s Chinese crap you can buy but performance car parts definitely is not one of them.
I think there's a lotta guys with LS swapped junk running around with Chinese turbos that would disagree with that statement?
Dam , thanks for this info man!
The chinese are taking advantage of one thing about us few willingly admit; we're cheap and kinda lazy. We want it now, not tommorrow. Why save for the good stuff when you too can have as much fun as someone else looks like their having?..... :-| Just save up for the better stuff....right now is not always right.
I got it! Lol just buy injectors double the size you need and you'll get exactly enough fuel.
I do injector servicing in my shop as an "on the side" thing. Its crazy on how bad these china injectors are. Those and the ones which are low flowing but modified to flow more. I always pretty firm on people spending money on genuine injectors since if something fails in the fueling it can take the whole motor with it.
You should test some snake eaters. I'd like to see how they compare to Bosch
Great content thanks for sharing
Wth what happened to the Cletus thumbnails, I use to hate clicking on ur vid expecting cleeter but I got u
You definitely get what you pay for
Autool fuel injector cleaner and tester
Thanks was curious how they can sell them so cheap .This tells all . Waste of money they are plus if they short out many will burn the injector driver if dead short out then ECM replace.
It saddens me to see folks who really don't have much money THINK they are "saving themselves some money" by using cheap shit Chinese parts. Because after WASTING that money on cheap parts, now they have to spend EVEN MORE MONEY on better parts........that they should've bought in the first place.
Remember, some people (me) got scammed buying parts sold as Bosch and labeled as Bosch too. Not always the consumers fault.
You, vs the guy she told you not to worry about.
😬
that is a great comparison video
Awesome clip.
I was hard on you I think in my last comment. This and and a bit of the nerdery behind it would be good and possibly your niche.
Now on to dynamite
i got a question if I have oem injector 1pin hole @ 243.8cc p/m and swap for 4pin hole 232.1cc p/m, will the 4pin hole spray more fuel than the single pin hole? can the 5.9L magnum benefit from 4pinhole vs the oem 1pin hole?
Where you guys Bern no videos in a long time I try to follow you guys
Fuel the Al Gor ithm and support the RPM Act.
HAHAHAAHAHAHA
Dang! Very cool to see.
And with Lead paint
Where did you go?
Pretty sad that most things are made in China and most of them are complete garbage. Hell, even a lot of AC-Delco stuff is made in China now😢
Going to get kicked off tik tok now.
In my yaris 2006 1.3 vvti OEM injectors not giving good performance, I will check with China made 😅
Why don't you say Chinese vs German, or vs Bosch. Chinese vs Bosch just makes nationalistic.
Bosch products atleast some are made in china!!!!!!
Jeremy I miss your content please Talk Nerdy To Me More
What happened to this channel???????? No videos in almost a year???
i call it the china syndrome at my shop
Just did a full afm delete, cam swap and lift only 3 parts made in China. A gates belt and my rough country knuckles and shocks. I don't shop at Walmart and I always pay more for not made in China. If you don't like Chinese junk, quit giving them your money.
easier said then done. Sadly everything you buy be it made in japan or any other country is going to have parts from china.
Is that Spanish cooper?!?
Bosch always better
Snake eaters FTW
sorry but since when do yanks take credit for german ingenuity?
Bu-yao!
Dead time of chinese are higher than german
So what your saying is buy 80lb Chinese injectors to get 40lb injectors
Did they come with a free bag of coronavirus
- 👍 👍 🔧 -
#teamseas........................................................
#nochinesium!
German quality vs. Chinese knock off. Buy German. You buy once, not twice.
Shows how crap Chinese injectors are on a Chinese injector machine. 🤣
You're right LOL!!! 😆
Not only does the Chinese injector flow half the fuel it's supposed to, but it seems that it also has less atomization, too.
Economy injectors in more than one way, except the repair cost of burnt valves and melted pistons. That's so different, the exhaust temp. could set the car on fire.
That company should be banned from selling in USA as should anyone else who imports their garbage. If only we had people, like that we elect or something, to make sure we didn't have to even worry about these kind of things.
Yet we still buy their junk 🙄
Hey Jeremy, Shorts are supposed to be a portrait style video...
It's hard to see that things are working correctly let alone manufacture quality products when you cant even open your eyes
Lol, looks like more than “woke” stuff goes to shit.