Saleen Foxbody Stock Injector Upgrade?? Worth the Squeeze? Bosch EV1- EV6
HTML-код
- Опубликовано: 4 ноя 2021
- Check out www.puristmotorsports.com for project updates and details on parts for cars like this in this video.
Facebook / puristmotorsports
Instagram / puristmotorsports
Our Website Store puristmotorsports.com/shop/
This week we try to troubleshoot an issue to see if it is what we think it is. The injectors in these old Fox Mustangs are 40 year old technology. An upgrade is in order, especially with a supercharger. So we bought a set of remanufactured Jetronic connector, single body injectors that are a direct replacement for 1986-1993 Fox Mustangs.
The part number of what we installed in the car is.
Bosch Part# 0280155746
We are trying hard not to over restore this and find all the unique parts to it since it was a Bleakley Impressor Saleen. A very unique run of cars that is mostly well known in the Atlanta Georgia area where Bleakley Ford was the leading Saleen dealer in the late 1980's and early 1990's.
Check out the blog we've been putting together on this car to see where we've come from and where we are now.
puristmotorsports.com/project... 
Авто/Мото
Excellent info and a very worthwhile upgrade. I have a set of 4 hole injectors to put in with my upcoming GT40 head / ported stock intake / speed density upgrade. Although mine have the same thicker bodies like the original. Got them from eBay professionally cleaned and spray matched.
They are worth the upgrade for sure. Spray pattern is way improved and helps with throttle response. The 24lb injectors in my race motor I built are like yours. Old style body but 4 hole pintle.
Worked in my 4.9 coup deville really good 👍
When I worked in the dealership in the 90's, Ford had a special machine to clean those old injectors. The newer injectors were said to be "deposit resistant". Good video.
Make sense why I found out that my mom's 96 Ford E-350 Club Wagon with 351 Windsor have 3 different injectors. I was confused at first and trying to make sure if it was the correct one. I'll probably look out for the connectors when I get to it in 2 weeks. Thanks for the info.
I own a 1990 f150 with a 302 ..thanks for the injector tip.
Thanks for sharing the injector upgrade info Bob. I’ve wondered about upgrading my green top fat 42s. An improved spray pattern sounds nice indeed.
It’s worth looking into Chris. Yours may already have that 4 hole pintle in them.
It’s been a while since I looked but I believe you are right on the green 42s. But a newer style should still spray better.
Great video, I appreciate the information. Will an upgrade to Saleen/Vortech intake, twisted wedge heads and E-cam require me to switch to 24lb injectors?
That's a good question. If it were my combo, I'd be looking into that. The safe bet is 24lb injectors.
Jet tronics was designed in 1960s. In the shop I have a 1975 Mercedes with this system. And countless beetles and buses with this system
Injektors aliexpress ebay ?
Sorry to hijack the comments and I appreciate your video! I'm researching and before buying I just want to make sure they fit in the rail. Are some ev6 injectors too long I need 24lb injectors for a 97 cobra. It runs smooth now but I've replaced 3 injectors maybe 4 now so the rest won't be far behind.
If you can, replace them all at the same time. That’s been the best for me when I do it.
Can you use the v8 5.0 explorer injectors? They're the updated skinny injectors that are 19lbs. I'd imagine they'd work, no?
I've heard folks have done the update and had good results.
I think you are right. I focused more on the specific part number of the injector I used for the upgrade. It’s in the video. I want to say they were also used in the 4.6 SOHC Mustangs too.
@@PuristMotorsports And the 4.6L Panthers. That's what's under my Grand Marquis' hood now. Skinny, long and safety orange.
Yeah! That’s right! I forgot about those too. Excellent info.
@Purist Motorsports I have a 1994 Ford F-150. It has a 302/ 5.0 so do you think this will work on it just plug it up and go or will I have to buy an adapter? Any feedback would be appreciated.
Good question. Does that F150 have the orange injectors in it? I think it does. If so, these should work. But more research is needed to be 100% sure.
To add, if you use this injector in the video you shouldn’t need an adapter.
@@PuristMotorsports Its likely they are. They are the original but they are still installed. Im going to take it to the mechanic this weekend. Either way I do appreciate the feedback sir. Have a great weekend.
what brought me to this video is to research should I get ev14's over the 4 hole ev6 for my 94 NA 331 that I'm going to build???
What little I’ve dealt with in the new injectors hasn’t been a great experience on the older style connectors with the adapters. The adapters were causing intermittent connection issues. It was one more point of failure from what I dealt with. Take that for what it’s worth because the atomization of the new injectors is really good. Me personally, I’ll stay with the best injector that connects directly to the wiring harness being used.
@@PuristMotorsports okay got you and thanks for the reply. This tuner on the mustang groups actually advised to use the pigtails versus the adapters did you think about using pigtails and splicing or solder? For me if I could get to it decently and splice it and be comfortable I would probably just splice it as in me. The ev6 4 hole that ballenger Motorsports have they all direct replacement to the Ev1 OEM connectors. I guess for me I would always like to go with the latest and greatest and just overall so I would love to use a TV for tens but yeah I'm not trying to have any issues or anything to be honest so I will likely not splice and just probably go with the EV6
I’d definitely be a little more comfortable with pigtails. I wasn’t aware those are available. Splicing in the new connector is a good option if you can do it right but that needs to be done with great detail and care IMHO. You’re messing with the heart of your combo there. I think I’d go pigtails over splicing. I want to say what the issue with the adapters were that the tops of some of the injectors were getting pushed on by vacuum lines under the long runner side of the intake. It was causing intermittent issues.
@@PuristMotorsports yeah I just have to kind of read up on things a little more and kind of do a little more research as to the components that I will be using and if anyone had any issues you know accelerate the panel what intake I'm going to be using.
Do they have one in a 30 LBS injector i have a hard time this looks awesome and the price wow
or even a 24 lbs injectror i have a full N/A trickflow set up
I’ve used them but have only based them on the color not part numbers. The light blue was 24lb and the red was 30lb. Again, I didn’t cross reference part numbers, I just based that on the colors as they seemed to be the same as the EV1’s.
Left out a lot of details. Im still lost on the matter. Im getting ready to replace my injectors and would like to know more.
What questions do you have? I may be able to help.
I have a speed density 88lx I did this upgrade along with gt40 heads and intake swap and now the car is running super rich gas getting into the oil as well, could the injectors I got be leaking or do I need a tune?
Have you replaced the fuel pressure regulator?
Yes sir
Was it a factory replacement or adjustable?
Factory replacement from parts store but it does have a set screw on to unlike the OE one I took off
Factory replacement from parts store but it does have a set screw on to unlike the OE one I took off
Wondering where to find the resources to match these up I have a 5.4 2v with the old injectors looking to find correct replacement
I have no relation to the people posting in this thread. But there is a visual picture of what the injector types are several posts in. Maybe this will help?
www.stangnet.com/mustang-forums/threads/fuel-injector-identification.807323/?amp=1
Where i can get them
I found mine on eBay. They were refurbished
Part number please. I need to upgrade
In the description brother.
I’m first!!
think I missed the part #
Check the description of the video. I did put it there. Depending on your browser you have to expand that part of the web page.
FJ78 Standard Motor Products.
Got mine at O'Reilly.
Hmm I think that's what's wrong with my car time to pull the intake off and see
Hopefully this helps you. Several of the injectors in my car were definitely leaking down after the car shut off.
@@PuristMotorsports I hope so cause my car been sitting down for a few years and when I got it back I changed the battery, starter and thought that was the reason for slow cranking but it continued and I noticed a strong gasoline smell on my oil dip stick
If you have a small cam with stock heads , this will make the car sound stock . They are excellent for stock applications, none cammed car or must be tunedr to fix this .