There’s a lot of criticism on here about the quality of these vehicles and engines,ordinary people cannot afford tens of thousands of pounds to purchase a better class of vehicle and are quite happy to have a cheap reliable mode of transportation. I have had many types of vehicles over the years but one of the best I have owned was a Renault Clio 1-9D which I bought new. I had it about 3years and sold it to a workmate who did over 120,000 miles in it and then give it to his daughter who had it for years. It doesn’t mean you have to spend a ton of money to get a decent vehicle.
It goes back to childhood, where your parents told you "you get what you pay for". Clearly that's a huge lie, when the sandero is much better than the price tag. Badge snobs can laugh at Dacia, but we can laugh at them for wasting their money.
I covered over 30k km on my Dacia with LPG since January 2020 and had no trouble whatsoever. I was really worried about driving it for so long, especially on the Autobahn with high speeds with the 3-cylinder engine but it runs really fine. Nothing fall apart or is more different quality-wise than a cheap Volkswagen up. And tbh, a daily has to be cheap if it does many kilometres per year. And yes, the comfort and steering aren't really outstanding but the car does it's job, even more for what you except for the price. I don't wanna spend the same money on a used BMW/Mercedes/Audi/VW because even if they give you more power, luxury and so on, they also give you trouble with expensive parts just because they got so overengineered.
Uno dei motori più apprezzati in termini di consumi e affidabilità , ormai nessuna fabbrica costruisce da zero il proprio motore e questo è un vantaggio , non si rischiano ritardi nelle consegne perché i pezzi da assemblare non arrivano. Bel video !
Briliant! BTW, this is one of the most reliable modern engines. Hundreds of thousands of taxis use it without any problem whatsoever for hundreds of thousands of kilometers in Romania
Oh really?! Do you have any evidence to prove that? From spoken word alone, I know that what you're referring to is the MPI engines that are no longer in production and this video is about the new 3 cylinder engines which are in production starting 2013. That's just 6 years of production and use. The MPI's had at least 13. Please don't spread misinformation.
Voici une très belle réalisation vidéo montrant la fabrication du moteur TCE 90cv de 0.90l qui depuis 8 ans à largement fait ces preuves et ce bloc en Aluminium est un très bon moteur. Belle réalisation !!! Merci ✌🏻🐸
Marvellous video of one of my favourite cars. Fascinating to see the technology at work. A reminder too of how easy it is to work on engines outside the car.
У жены на Микре такой, только атмосферный. Не смотря на 3 цилиндра довольно резвый, пробег уже 180, масла не жрёт, все нормально, хотя и современное одроразовое алюминиевое г...
I own a Dacia mcv good car goes from a to b in surprising comfort always regretted not paying 15,000 eruo more could have had a big shiney badge and image at 76 I worry about my street cred
I bought a Captura 2 1.0 tce lpg 2020 with 80,000 km. The belt that goes over the water pump fell out, the pump broke. Do you admit a factory error, because I don't know which engineer designed the pump that does not have limiters for the belt and that falls apart, are there many cases of this happening?
What's the difference between a Renault/Dacia/Nissan and Mercedes engine? For some engines just the price. I love people paying triple price for having a printed star onto a Renault/Dacia/Nissan engine. Renault/Dacia/Nissan engines are great.
@@vasile3311 First generation in the very long run corrosion can occur. For the second generation hdg steel was used. No mecanical corrosion anymore. Let's go for 1000000 km. Engineers love Dacia.
I think you known Mercedes Benz use some Renault DCi engines (and Renault some Mercedes engines like the new TCE1.3L who is much better as the old TCE1.2L): Renault,Dacia and Smart (Mercedes Benz) use exactly the same TCE90 engines (exept the Brabus Smart who is a improved engine), and DCi (diesel), but the DCi engines for Mercedes Benz class A B and C and Citan (Kangoo by MB) have some improvements like a belt drive who last longer (240 000km), and some other small details, but basicaly are the engines the same...MB did choice the DCi engine because they prove they are a bit better as the same power MB engines for less money: make small low cost engines need a long experience , and MB as much more experience with expansive engines...
docela jako v AZNP v Mladé Boleslavi minulého století ty manipulátory s názvem roboty tam moc práce na lince neušetří, nejvíc se mi líbí pojízdná plošina s dělníkem, to jsem neviděl, na pásu se popocházelo v rytmu linky
sunt printre cele mai economice motoare, iar legile spun deocamdata asa: 50kmh,90kmh,100kmh,130kmh, deci care e sensul unui motor de 3ori mai mancator de combustibil si impozit anual cat un salariu?....
@@ioneliancu6387 CUPLU cand ai nevoie (cuplu e atunci cand pleci de pe loc sau cand ai nevoie de putere in depasire) cu motoarele astea " cele mai economice motoare" te bagi in depasire de tractoare sau cand nu vezi nimic pe contrasens :))
ресурс как я понимаю 50-150 ткм в зависимости от наездника. Жидкие алюминиевые блоки уже достали, все мучаются. Они не любят перегрев, высокую нагрузку и частые прогревы а в холодных климатах это неизбежно. Ресурс смехотворный.
Nice video..the robot can stand heat after casting process and for one spot take multiple work (fastening).is it no obligatory to use hair net to those who has long hair?
Renault Clio4, Dacia..... Ce bloc a était et reste un excellent moteur et cela partout dans le monde. Ça conception et sa fiche technique mérite vraiment que l'on si intéresse car 90cv avec 0.9l c'est complètement dingue de plus que ses performance sont très bonne. 👍🏻
These engines are manufactured on mass, and you will find the the machine tolerance and consistency is far higher than that of a hand made engine in some supercars. Where hands make errors and computers don't. I not saying every engine is perfect but the chances of getting a faulty one are very low
Why are u bringing that up anyways ? The cars that uses the engines are not even close as expensive as the A45 But look They are more reliable than any modern Mercedes engine Even Mercedes uses the new 1.3 l 150 HP , 1.5 L diesel 109 HP in their cars
Bonjour Mr comment allez-vous et votre santé ça va toute mes sincères salutation, je suis un jeune Haïtien, étudiant en 3ème année Mécanique automobile en Haïti , Je suis tellement passionné de la mécanique mais en Haïti nous manquons du pratique dans les centres de formation et je suis intéressé de m'aventurier dans l'un des garages en France .Espérant que ma demande recevra un avis favorable, je vous prie d'agréer, Monsieur l'expression de mes sentiments distingués. Merci pour votre disponibilité. Bien cordialement,
3:07 It must be tiring and boring work, but I don't know if the worker needs false eyelashes, bracelets, earrings, in such a workplace? A working woman can be attractive even without it. His attention is divided, after an operation he already looks somewhere outside, something distracts him. That's why people are thrown out and replaced by robots. But then at least all the screws will be stable.
Че вы жалуетесь румыния румыния вы же хотите дешевле как можно дешевле вот и получайте хотите не румыния покупайте мерседесы бмв и порше производства Германии
А бабищи зачем разукрашиваются на такой работе? Сексуальная провокация? А в суд не хотите за такую провокацию? Мужики вот чето не крашеные ни один не пришли!
There’s a lot of criticism on here about the quality of these vehicles and engines,ordinary people cannot afford tens of thousands of pounds to purchase a better class of vehicle and are quite happy to have a cheap reliable mode of transportation. I have had many types of vehicles over the years but one of the best I have owned was a Renault Clio 1-9D which I bought new. I had it about 3years and sold it to a workmate who did over 120,000 miles in it and then give it to his daughter who had it for years. It doesn’t mean you have to spend a ton of money to get a decent vehicle.
It goes back to childhood, where your parents told you "you get what you pay for". Clearly that's a huge lie, when the sandero is much better than the price tag.
Badge snobs can laugh at Dacia, but we can laugh at them for wasting their money.
I covered over 30k km on my Dacia with LPG since January 2020 and had no trouble whatsoever. I was really worried about driving it for so long, especially on the Autobahn with high speeds with the 3-cylinder engine but it runs really fine. Nothing fall apart or is more different quality-wise than a cheap Volkswagen up. And tbh, a daily has to be cheap if it does many kilometres per year. And yes, the comfort and steering aren't really outstanding but the car does it's job, even more for what you except for the price.
I don't wanna spend the same money on a used BMW/Mercedes/Audi/VW because even if they give you more power, luxury and so on, they also give you trouble with expensive parts just because they got so overengineered.
I had a Twingo diesel. Sold it at 470'000km (yep, three zeroes). The new owner is happy! Now I have a Dacia with the same engine.
Bravo Romania 🇷🇴👍❤️ Succes incontinuare
Uno dei motori più apprezzati in termini di consumi e affidabilità , ormai nessuna fabbrica costruisce da zero il proprio motore e questo è un vantaggio , non si rischiano ritardi nelle consegne perché i pezzi da assemblare non arrivano.
Bel video !
8:50 that moment when boss said TV will record you working and you have to do something..
Finally engine assembly that includes the ingots!!
Ive just ordered a new dacia,its really interesting to see how they’re made 👍
Es fascinante ver como se crean los motores. La fábrica es moderna y limpia. Da gusto verla.
When you see the manufacturer taking ingots of aluminum from the very beginning you know it's got to be a serious video
I love it without music !
Briliant! BTW, this is one of the most reliable modern engines. Hundreds of thousands of taxis use it without any problem whatsoever for hundreds of thousands of kilometers in Romania
Oh really?! Do you have any evidence to prove that? From spoken word alone, I know that what you're referring to is the MPI engines that are no longer in production and this video is about the new 3 cylinder engines which are in production starting 2013. That's just 6 years of production and use. The MPI's had at least 13. Please don't spread misinformation.
Gad bless You Manole cel mai mare boss că fără tine nu exista virgula
@@PaulSebastianM do you have any evidence to prove that he is not talking about 3 cyl. engine ?
@@gautierpetit7766 he's talking about the 3cyl IMO since I have heard the same things but different country.
Merci pour le partage de ce processus qui combine l'intelligence humaine à la force de la machine
Me acabo de comprar un Dacia Sandero expression y espero que me dure muchos años saludos para Dacia y sus trabajadores
Voici une très belle réalisation vidéo montrant la fabrication du moteur TCE 90cv de 0.90l qui depuis 8 ans à largement fait ces preuves et ce bloc en Aluminium est un très bon moteur.
Belle réalisation !!!
Merci ✌🏻🐸
Ah c'est le 90chv?
J'aurais aimé voir celui du moteur DACIA 100CHV GPL
Marvellous video of one of my favourite cars. Fascinating to see the technology at work. A reminder too of how easy it is to work on engines outside the car.
Isso mesmo
this is so satisfying to watch! :D
🙏🙏 Thanks For your comment 👍🏻👍🏻👍🏻
I had a clio with this engine, such a fun car. Only 900cc but it was so willing and fun.
Still have it, modded it to 130hp, it is really fun eheh
@@thetiagomatos 130! That’s cool. Bigger turbo and a remap?
Interesting video my wife had a 2016 dacia sandero stepway diesel it brilliant
Much better than people think the rest of the manufacturers are a bit overpriced
And a bit better quality.
@Herr Mai No what?
@@paulparoma ingot is ingot, and Gravity is Gravity over all in the world😉
I had a Twingo diesel. Sold it at 470'000km (yep, three zeroes). The new owner is happy! Now I have a Dacia with the same type of engine (K9k).
У жены на Микре такой, только атмосферный. Не смотря на 3 цилиндра довольно резвый, пробег уже 180, масла не жрёт, все нормально, хотя и современное одроразовое алюминиевое г...
У меня на смарте такой , только турбо. Очень резвый, большинство из потока уделывает на раз
@@dmitriyp7701 на смарт ставят движок рено-ниссан?
@@Євгенавтоелектрика да
Great performance and powerful, I own a dacia Logan MCV 2014 car, and I have a Tce 900 cc with a turbo and less fuel use. Thanks for posting :)
Any problems?
@@ubbgn@ no problems at all and I happy with this car :)
@@fredcommandeur8809 what milage u r going to run?
@@fredcommandeur8809 For now.
Powerfull 😂
I own a Dacia mcv good car goes from a to b in surprising comfort always regretted not paying 15,000 eruo more could have had a big shiney badge and image at 76 I worry about my street cred
I feel sorry for you.
i think is at Renault Cléon France...no sorry , engine factory Romania , lol , good repport :)
who decides to put service parts under the back of the engine, so you have to take a thousand screws out to change a thermostat ?
You don't have to. Have somebody else do it
@Herr Mai That's right. Let him to conceive a better engine.
Its for a reason
They make the most reliable engines for a reason
Proudly made in Romania
Very good video. I guess there safety standards are different than the US. No one had safety glasses on !
There is no need for safety glasses here
For what?
There is no metal cutting or anything in this video done by hand
The guy on 2:05 has safety glasses, but I agree they have safety problems on that factory
Особено порадовали лотки для зч из канализационны труб на 5:00
Lipsa ungere componente inainte de asamblare in blocul motor , lipsa garnituri cu silicon ... la romanasi merge orice !
Alt super inginer care își da cu părerea.
I bought a Captura 2 1.0 tce lpg 2020 with 80,000 km. The belt that goes over the water pump fell out, the pump broke.
Do you admit a factory error, because I don't know which engineer designed the pump that does not have limiters for the belt and that falls apart, are there many cases of this happening?
C'est beau l'industrie française, le Made in France félicitations !!!
Non è made in France ma made in Romania, te ne sei accorto?
Bu sağlam araç böyle yapılıyormuş demek 😄
В Европе Лет 7 уже большинство 3 цилиндровых двигателей
Una maravilla la robotización de Renault, saludos desde Chile !
Отлично
What's the difference between a Renault/Dacia/Nissan and Mercedes engine? For some engines just the price. I love people paying triple price for having a printed star onto a Renault/Dacia/Nissan engine. Renault/Dacia/Nissan engines are great.
@ferkemall With the right maintenance Dacias run ~1000000 km.
@ferkemall my dacia have 450000km, whith absolutly no engine problems, all stock.
@@vasile3311 First generation in the very long run corrosion can occur. For the second generation hdg steel was used. No mecanical corrosion anymore. Let's go for 1000000 km. Engineers love Dacia.
I think you known Mercedes Benz use some Renault DCi engines (and Renault some Mercedes engines like the new TCE1.3L who is much better as the old TCE1.2L): Renault,Dacia and Smart (Mercedes Benz) use exactly the same TCE90 engines (exept the Brabus Smart who is a improved engine), and DCi (diesel), but the DCi engines for Mercedes Benz class A B and C and Citan (Kangoo by MB) have some improvements like a belt drive who last longer (240 000km), and some other small details, but basicaly are the engines the same...MB did choice the DCi engine because they prove they are a bit better as the same power MB engines for less money: make small low cost engines need a long experience , and MB as much more experience with expansive engines...
@@leneanderthalien Are you working at Pitesti or Cleon? I just come back from a production trial in Flins.
.... looks like building a cold metalic emotionless heart .... for a TERMINATOR .....
Conglatulation for the vídeo!
tüm videolarınıza bakiyorum harika valla..
In Pitesti Romania?
Yes. In Mioveni, Arges county.
Nu recunosti fetele de romani? Plus ca scrie Zona Stocare ....incomplete
3 cilinder 900cc turbo engine for Renault, Dacia and Nissan
Now 1000cc 3cyl engine too with 100hp in the nissan micra, maybe later in Dacia?
docela jako v AZNP v Mladé Boleslavi minulého století
ty manipulátory s názvem roboty tam moc práce na lince neušetří, nejvíc se mi líbí pojízdná plošina s dělníkem, to jsem neviděl, na pásu se popocházelo v rytmu linky
I am asking for a Honda factory
А что четвертого целиндра больше не будет?
цЕлиндра точно не будет, да и не было
Eu tenho um Sandero, gosto muito do carro.
Motoare pentru mașini de femei făcute de femei! :)
sunt printre cele mai economice motoare, iar legile spun deocamdata asa: 50kmh,90kmh,100kmh,130kmh, deci care e sensul unui motor de 3ori mai mancator de combustibil si impozit anual cat un salariu?....
@@ioneliancu6387 I love my Hemi
@@ioneliancu6387 CUPLU cand ai nevoie (cuplu e atunci cand pleci de pe loc sau cand ai nevoie de putere in depasire) cu motoarele astea " cele mai economice motoare" te bagi in depasire de tractoare sau cand nu vezi nimic pe contrasens :))
@@tomytza123tomescu2 ești foarte deștept, fiecare își alege ce vrea, tipic romanesc
@@valyteoc5469 hai sictir
ресурс как я понимаю 50-150 ткм в зависимости от наездника. Жидкие алюминиевые блоки уже достали, все мучаются. Они не любят перегрев, высокую нагрузку и частые прогревы а в холодных климатах это неизбежно. Ресурс смехотворный.
250 ездят
SUPER CAR
Nice video..the robot can stand heat after casting process and for one spot take multiple work (fastening).is it no obligatory to use hair net to those who has long hair?
Haryo Mukarnadi they are not producing cake. So there is no need to use bone or etc.
Renault sandero é logan do Brasil equipados com esses motores
Estes motores é da duster dacia 1,3 de três cilindros em linha q será o novo motor da duster no Brasil previsto para 2021
Não, este motor é de 1,3 cc de três cilindros em linha q equipa a duster dacia só chegará no Brasil em 2021
Renault Clio4, Dacia..... Ce bloc a était et reste un excellent moteur et cela partout dans le monde.
Ça conception et sa fiche technique mérite vraiment que l'on si intéresse car 90cv avec 0.9l c'est complètement dingue de plus que ses performance sont très bonne.
👍🏻
3 цилиндра вы серьезно ? Лучше 2 и больше пластика )))
Manufaktur sangat bagus
Romania
Loira linda!
when do they tested
Roumania :)
The guys there do the same work as in Wolfsburg but for 80% less payed.
That's not true...it's about 40-45% lower than in Wolfsburg but in the same time the living cost is also considerably lower.
quel matière le bloc moteur ?
Usine en France, du moins sur certaines séquences de la vidéo au vue des écritos en Francais ?
Romania
Вот-вот куда наш метал с России идет,.
Die Zerspanung, das Wichtigste fehlt in diesem Film....?
Γιατί μερικά έρχονται καινούργια μέ πρόβλημα σασμάν, βολάν καί ηλεκτρονικά;
Ένα χρόνο μέσα έξω στό συνεργείο.
Καινούργιο αυτοκίνητο.
I like watching factories at work but I'd never want to work in one. The repetitive work and the monotony would just be too much for me.
Horatio Jones whats your job then?
@@damaestro5667 I used to butcher frogs legs for the French delicacy until I mistook an amphibious frog for a human one. 😕
@KonoSuba this Wonderful World Industrial accidents are a terrible thing.
These engines are manufactured on mass, and you will find the the machine tolerance and consistency is far higher than that of a hand made engine in some supercars. Where hands make errors and computers don't. I not saying every engine is perfect but the chances of getting a faulty one are very low
3:15 the plastic thermostat is the cause of the death of this motor (destruction of the thermostat and overheating of the engine)
Endlich sehe ich Mal wie die Lichtmaschine meines Actros 2245 hergestellt wird
See that after New A45 AMG 431hp... not same quality ^^
Did you know that Mercedes uses Renault engines in their smaller versions? Those engines, which also run in Dacias :D
Why are u bringing that up anyways ?
The cars that uses the engines are not even close as expensive as the A45
But look
They are more reliable than any modern Mercedes engine
Even Mercedes uses the new 1.3 l 150 HP , 1.5 L diesel 109 HP in their cars
In fabbrica i rumori sono maggiori di quelli del video. Il video ha un audio fake
Hola donde esta esa fabrica en que parte de Europa.
Romania
Gracias amigo saludos desde México.
Bu dünyada metali isleyebildigin kadar varsın
My fathers Renault had and engine start crank for it .....
Работа есть работа асобено тостольная👍👍👍👍👍👍👍👍👍👍👍👍👍👍🤝🤝🤝🤝🤝🤝🤝
any chance you can post a link to where this is pirated from, so I can watch it in the right order?
@@mounir_mouza2969 orcish KEK????
блин как в фильме ВИРУС.........
The A-series engine made by BMC are good.
Moteur 0.9 tce Renault France
Renault France oui mais pas réalisé en France 🇫🇷.
Bravo et Respect pour ce bloc moteur léger et durable et propre meme 8ans après son lancement.
Romania
Лови ее вон ту бабу которая на рено святое место термостат затягивает не глядя а он течет у всех
Bonjour Mr comment allez-vous et votre santé ça va toute mes sincères salutation, je suis un jeune Haïtien, étudiant en 3ème année Mécanique automobile en Haïti , Je suis tellement passionné de la mécanique mais en Haïti nous manquons du pratique dans les centres de formation et je suis intéressé de m'aventurier dans l'un des garages en France .Espérant que ma demande recevra un avis favorable, je vous prie d'agréer, Monsieur l'expression de mes sentiments distingués. Merci pour votre disponibilité.
Bien cordialement,
Nothing is better than watching beer cans becoming reused
Dacia duster 4wd king of the suv ...
Porsche motor üretimini seyredip sonra bunu seyredince yani ne biliim...
Tek kullanımlık motor.
😀👍
The real manufacturing of demon ,hellcat.
3 цилиндра?) Ебать !
Зато, стенки цилиндров толстые и расстояние между ними не попиленное.
Where is this factory?
ROMANIA
Motor bomba não compre 💣💣💣👌
После стерильной чистоты Мерседес, Ауди и Порше этот заводик выглядит довольно грязным.
These engines are used in Mercedes cars 😂
3:07 It must be tiring and boring work, but I don't know if the worker needs false eyelashes, bracelets, earrings, in such a workplace? A working woman can be attractive even without it. His attention is divided, after an operation he already looks somewhere outside, something distracts him. That's why people are thrown out and replaced by robots. But then at least all the screws will be stable.
GANHAM MUITO DINHEIRO COM A MÃO DO TRABALHADOR DEPOIS COMPRAM ROBOS E ENFIAM O PÉ NA BUNDA DE QUEM OS ENRIQUECEU. LITERALMENTE!!!
Robots wages ? One tin of 3in1oil and a tube of grease a week , yes folks the machine doth Cometh .
MERCEDES LİKED THİS :)))
Че вы жалуетесь румыния румыния вы же хотите дешевле как можно дешевле вот и получайте хотите не румыния покупайте мерседесы бмв и порше производства Германии
ДВС делает Китай на твою БМВ!
1.0 TCE 100
А бабищи зачем разукрашиваются на такой работе? Сексуальная провокация? А в суд не хотите за такую провокацию? Мужики вот чето не крашеные ни один не пришли!
Так производится одноразовое гавно. Аллюминиевые блоки 3 х цилиндровые это просто ужас . Сейчас не выгодно делать качественные автомобили.
Добро пожаловать в 21 век!
Engine is way too small and underpowered for the car's weight
După ce am văzut video-u' ăsta, nu mă mai mir de ce pică motoarele la Dacii pe capete. Atâta lipsă de calitate...
09TCE...90 cai
Вот как делают алюминиевое говно ! Теперь я знаю всё!
Воистину, они сами стесняются знак Рено на этом ставить выдумали дачу
Vamos começar pelos políticos!!!